MACSIM Galvanised Masonbolt 12mm is a heavy-duty anchor bolt designed for secure fixing into masonry and concrete, making it ideal for demanding construction and renovation projects where strength, reliability, and long-term performance are critical. Key Features Application suitability – Engineered for anchoring structural fixtures, brackets, and heavy hardware into brick, block, and concrete substrates. Design – Expansion-style bolt design delivers a strong mechanical grip for high load-bearing applications. Material quality – Manufactured from robust steel with a high-quality galvanised coating for enhanced protection. Durability – Corrosion-resistant finish ensures reliable performance in tough site conditions and extended service life. Installation – Simple drill-and-fix installation with standard tools for fast, secure anchoring on-site. Maintenance – Low-maintenance solution that retains holding power with minimal inspection or adjustment. Versatility – Suitable for a wide range of commercial, industrial, and residential fixing tasks using a 12mm anchor size. [additional] Drill: 12MM Length 50MM to 129MM Fasten 10MM to 85MM Depth 40MM to 55MM Pack QTY 25 to 50 PCS

Read more less

Macsim Masonbolt Anchor Countersunk Head Slot Recess 316 Stainless Steel delivers secure, flush-fit, corrosion-resistant anchoring in concrete, brick, and masonry, ideal for both indoor and harsh outdoor environments. Key Features Application suitability – Engineered for reliable fixing into concrete, brick, and masonry for structural and general-purpose anchoring. Design – Countersunk head with slot recess allows a neat, flush finish that sits level with the surface. Material quality – Manufactured from premium 316 stainless steel for superior corrosion resistance in marine and industrial environments. Durability – High-strength construction provides long-lasting performance under heavy loads and demanding conditions. Installation – Simple expansion-style anchor design enables quick, secure installation with standard tools. Maintenance – Corrosion-resistant finish reduces the need for ongoing maintenance or replacement. Versatility – Suitable for a wide range of fixtures, including brackets, plates, and hardware where a clean, low-profile appearance is required.   [additional] Stock Code: 68F10075 Carton Qty 8 Drill Size 10 MM Fasten 35 Depth 40 Qty 50 Length 75 MM Head Type Countersunk Head Packaging Type Trade Box Pack Drive Type Slot Recess Finish 316 Stainless Steel

Read more less

Macsim Galvanised Hex Head Bolt and Nut 10mm delivers strong, secure fastening for construction, carpentry, and metalwork projects, providing reliable performance wherever a tough mechanical fix is required. Key Features Application suitability – Ideal for structural joins, framing, bracing, and general fixing in timber, steel, and mixed-material assemblies. Design – Hex head design allows high torque tightening with standard spanners or sockets for a firm, stable connection. Material quality – Manufactured from quality steel for consistent strength and dependable load-bearing performance. Durability – Hot-dip galvanised coating offers enhanced corrosion resistance for long-lasting use in outdoor and demanding environments. Installation – Supplied with matching nut for straightforward, secure installation using common hand or power tools. Maintenance – Low-maintenance fastening solution that resists rust and wear, reducing the need for frequent replacements. Versatility – Suitable for a wide range of building, repair, and fabrication tasks across residential, commercial, and light industrial projects. [additional] Qty: 50 Diameter 10MM Length 75 x 100 x 150 MM Head Type  Hex Head Finish Galvanised

Read more less

Macsim Galvanised Hex Head Bolt and Nut 12mm delivers strong, secure fastening for construction, carpentry, and metalwork projects, providing reliable performance wherever a tough mechanical fix is required. Key Features Application suitability – Ideal for structural joins, framing, bracing, and general fixing in timber, steel, and mixed-material assemblies. Design – Hex head design allows high torque tightening with standard spanners or sockets for a firm, stable connection. Material quality – Manufactured from quality steel for consistent strength and dependable load-bearing performance. Durability – Hot-dip galvanised coating offers enhanced corrosion resistance for long-lasting use in outdoor and demanding environments. Installation – Supplied with matching nut for straightforward, secure installation using common hand or power tools. Maintenance – Low-maintenance fastening solution that resists rust and wear, reducing the need for frequent replacements. Versatility – Suitable for a wide range of building, repair, and fabrication tasks across residential, commercial, and light industrial projects. [additional] Qty: 25 Diameter 12MM Length 100 x 150 MM Head Type  Hex Head Finish Galvanised

Read more less

MACSIM Galvanised Masonbolt  8mm is a heavy-duty anchor bolt designed for secure fixing into masonry and concrete, making it ideal for demanding construction and renovation projects where strength, reliability, and long-term performance are critical. Key Features Application suitability – Engineered for anchoring structural fixtures, brackets, and heavy hardware into brick, block, and concrete substrates. Design – Expansion-style bolt design delivers a strong mechanical grip for high load-bearing applications. Material quality – Manufactured from robust steel with a high-quality galvanised coating for enhanced protection. Durability – Corrosion-resistant finish ensures reliable performance in tough site conditions and extended service life. Installation – Simple drill-and-fix installation with standard tools for fast, secure anchoring on-site. Maintenance – Low-maintenance solution that retains holding power with minimal inspection or adjustment. Versatility – Suitable for a wide range of commercial, industrial, and residential fixing tasks using a 8mm anchor size. [additional] Drill Size: 8 MM Fasten: 14 MM Qty: 25 Head Type: Flanged Hex Head Length: 60 x 75 x 100 MM Finish: Galvanised

Read more less

Macsim Screwbolt Flanged Hex Head Galvanised 10mm is engineered for high‑strength anchoring in concrete, brick, and masonry, delivering reliable performance where secure, removable fixings are essential. Key Features Application suitability – Ideal for heavy-duty anchoring in concrete, brick, block, and other solid masonry substrates. Design – Flanged hex head design provides excellent load distribution and secure driving with standard hex tools. Material quality – Manufactured from high-grade steel for consistent strength and dependable performance. Durability – Galvanised coating offers enhanced corrosion resistance for long-lasting use in demanding environments. Installation – Self-tapping screwbolt design allows fast, clean installation without the need for plugs or resin. Maintenance – Removable and re-tensionable, enabling easy inspection, adjustment, or replacement when required. Versatility – Suitable for fixing brackets, frames, machinery, and structural hardware across commercial and residential projects. [additional] Drill Size: 8 MM Fasten: 15 MM Qty: 25 Head Type: Flanged Hex Head Length: 60,75,100,125,150 MM Finish: Galvanised

Read more less

Macsim Screwbolt Flanged Hex Head Galvanised 12mm is engineered for high‑strength anchoring in concrete, brick, and masonry, delivering reliable performance where secure, removable fixings are essential. Key Features Application suitability – Ideal for heavy-duty anchoring in concrete, brick, block, and other solid masonry substrates. Design – Flanged hex head design provides excellent load distribution and secure driving with standard hex tools. Material quality – Manufactured from high-grade steel for consistent strength and dependable performance. Durability – Galvanised coating offers enhanced corrosion resistance for long-lasting use in demanding environments. Installation – Self-tapping screwbolt design allows fast, clean installation without the need for plugs or resin. Maintenance – Removable and re-tensionable, enabling easy inspection, adjustment, or replacement when required. Versatility – Suitable for fixing brackets, frames, machinery, and structural hardware across commercial and residential projects. [additional] Drill Size: 12 MM Fasten: 20 MM Qty: 25 Head Type: Flanged Hex Head Length: 60,75 &150  Finish: Galvanised

Read more less

Macsim Screwbolt Flanged Hex Head Galvanised 16mm is engineered for high‑strength anchoring in concrete, brick, and masonry, delivering reliable performance where secure, removable fixings are essential. Key Features Application suitability – Ideal for heavy-duty anchoring in concrete, brick, block, and other solid masonry substrates. Design – Flanged hex head design provides excellent load distribution and secure driving with standard hex tools. Material quality – Manufactured from high-grade steel for consistent strength and dependable performance. Durability – Galvanised coating offers enhanced corrosion resistance for long-lasting use in demanding environments. Installation – Self-tapping screwbolt design allows fast, clean installation without the need for plugs or resin. Maintenance – Removable and re-tensionable, enabling easy inspection, adjustment, or replacement when required. Versatility – Suitable for fixing brackets, frames, machinery, and structural hardware across commercial and residential projects. [additional] Drill Size: 16 MM Fasten: 20 MM Qty: 10 Head Type: Flanged Hex Head Length: 75,100,150 MM Finish: Galvanised

Read more less

The Macsim Carriage Cup Head Bolt and Nut Galvanised 10mm is designed for secure, tamper-resistant fastening in timber construction and joinery, providing a clean, low-profile finish while firmly locking structural elements together. Key Features Application suitability – Ideal for structural timber, decking, fencing, pergolas, and general joinery where strong, through-bolt fastening is required. Design – Cup head with square neck resists turning in the timber, ensuring a neat, smooth head finish and enhanced tamper resistance. Material quality – Manufactured from quality steel with precise threading for reliable clamping force and consistent performance. Durability – Hot-dip galvanised coating offers robust corrosion resistance, making it suitable for outdoor and exposed environments. Installation – Simple to install with a pre-drilled hole; the square shank bites into the timber so you only need tools on the nut side. Maintenance – Low-maintenance fastening solution that typically requires only periodic visual inspection in long-term timber structures. Versatility – Suitable for use with a wide range of timber sizes and assemblies, from light carpentry to heavier structural applications. [additional] Diameter: 8 MM Length: 50, 100, 120 & 150 Head Type: Cup Head Finish: Galvanised

Read more less

The Macsim Carriage Cup Head Bolt and Nut Galvanised 12mm is designed for secure, tamper-resistant fastening in timber construction and joinery, providing a clean, low-profile finish while firmly locking structural elements together. Key Features Application suitability – Ideal for structural timber, decking, fencing, pergolas, and general joinery where strong, through-bolt fastening is required. Design – Cup head with square neck resists turning in the timber, ensuring a neat, smooth head finish and enhanced tamper resistance. Material quality – Manufactured from quality steel with precise threading for reliable clamping force and consistent performance. Durability – Hot-dip galvanised coating offers robust corrosion resistance, making it suitable for outdoor and exposed environments. Installation – Simple to install with a pre-drilled hole; the square shank bites into the timber so you only need tools on the nut side. Maintenance – Low-maintenance fastening solution that typically requires only periodic visual inspection in long-term timber structures. Versatility – Suitable for use with a wide range of timber sizes and assemblies, from light carpentry to heavier structural applications. [additional] Diameter: 12 MM Length: 75, 100, 140 Head Type: Cup Head Finish: Galvanised

Read more less

Macsim Galvanised Heavy Duty Washers 8mm are designed to distribute load effectively around fixings, helping prevent pull-through and surface damage in demanding construction and assembly applications. Ideal for use with bolts and screws where extra support and stability are required. Key Features Application suitability – Engineered for structural, framing, and general construction tasks where enhanced load distribution is critical. Design – Heavy-duty, wide-face washer profile provides a larger bearing surface for improved support and reduced material stress. Material quality – Manufactured from robust steel with a high-quality galvanised coating for reliable performance. Durability – Corrosion-resistant finish ensures long service life in indoor and sheltered outdoor environments. Installation – 8mm inner diameter fits standard 8mm bolts and screws for quick, straightforward installation. Maintenance – Low-maintenance solution that requires only periodic visual inspection in harsh or exposed conditions. Versatility – Suitable for timber, metal, and masonry fixings across residential, commercial, and light industrial projects. [additional] Thickness: 2 MM I.D: 8 MM O.D 20 MM Range: Heavy Duty Flat Washer Finish: Galvanised

Read more less

Macsim Galvanised Heavy Duty Washers 10mm are designed to distribute load effectively around fixings, helping prevent pull-through and surface damage in demanding construction and assembly applications. Ideal for use with bolts and screws where extra support and stability are required. Key Features Application suitability – Engineered for structural, framing, and general construction tasks where enhanced load distribution is critical. Design – Heavy-duty, wide-face washer profile provides a larger bearing surface for improved support and reduced material stress. Material quality – Manufactured from robust steel with a high-quality galvanised coating for reliable performance. Durability – Corrosion-resistant finish ensures long service life in indoor and sheltered outdoor environments. Installation – 10mm inner diameter fits standard 8mm bolts and screws for quick, straightforward installation. Maintenance – Low-maintenance solution that requires only periodic visual inspection in harsh or exposed conditions. Versatility – Suitable for timber, metal, and masonry fixings across residential, commercial, and light industrial projects. [additional] Thickness: 2 MM I.D: 10 MM O.D 24 MM Range: Heavy Duty Flat Washer Finish: Galvanised

Read more less

Macsim Galvanised Heavy Duty Washers 12mm are designed to distribute load effectively around fixings, helping prevent pull-through and surface damage in demanding construction and assembly applications. Ideal for use with bolts and screws where extra support and stability are required. Key Features Application suitability – Engineered for structural, framing, and general construction tasks where enhanced load distribution is critical. Design – Heavy-duty, wide-face washer profile provides a larger bearing surface for improved support and reduced material stress. Material quality – Manufactured from robust steel with a high-quality galvanised coating for reliable performance. Durability – Corrosion-resistant finish ensures long service life in indoor and sheltered outdoor environments. Installation – 12mm inner diameter fits standard 8mm bolts and screws for quick, straightforward installation. Maintenance – Low-maintenance solution that requires only periodic visual inspection in harsh or exposed conditions. Versatility – Suitable for timber, metal, and masonry fixings across residential, commercial, and light industrial projects. [additional] Thickness: 2.5 MM I.D: 12 MM O.D 28 MM Range: Heavy Duty Flat Washer Finish: Galvanised

Read more less

Macsim Galvanised Standard Hex Nut 10mm is designed for secure fastening in construction, assembly, and repair projects, providing reliable clamping force when paired with compatible 10mm bolts or threaded rods. Key Features Application suitability – Ideal for structural connections, general assembly, and maintenance tasks using 10mm threaded fasteners. Design – Standard hex profile allows easy tightening with common spanners and sockets for a secure, consistent fit. Material quality – Manufactured from quality steel for dependable strength under load. Durability – Galvanised coating offers enhanced corrosion resistance for long-lasting performance, including in outdoor or exposed environments. Installation – Simple to install and remove, enabling quick fastening and adjustment on-site or in the workshop. Maintenance – Low-maintenance finish helps resist rust build-up, supporting smooth future tightening or disassembly. Versatility – Suitable for use across timber, metal, and mixed-material assemblies in residential, commercial, and light industrial applications. [additional] Size: 10 MM Qty: 1 Range: Hex Nuts Finish: Galvanised

Read more less

Macsim Galvanised Standard Hex Nut 12mm is designed for secure fastening in construction, assembly, and repair projects, providing reliable clamping force when paired with compatible 10mm bolts or threaded rods. Key Features Application suitability – Ideal for structural connections, general assembly, and maintenance tasks using 12mm threaded fasteners. Design – Standard hex profile allows easy tightening with common spanners and sockets for a secure, consistent fit. Material quality – Manufactured from quality steel for dependable strength under load. Durability – Galvanised coating offers enhanced corrosion resistance for long-lasting performance, including in outdoor or exposed environments. Installation – Simple to install and remove, enabling quick fastening and adjustment on-site or in the workshop. Maintenance – Low-maintenance finish helps resist rust build-up, supporting smooth future tightening or disassembly. Versatility – Suitable for use across timber, metal, and mixed-material assemblies in residential, commercial, and light industrial applications. [additional] Size: 12 MM Qty: 1 Range: Hex Nuts Finish: Galvanised

Read more less

Macsim Flanged Purlin Bolt and Nut Assembly is designed for secure steel purlin and structural connections, providing reliable fastening performance in roofing, framing, and general steel construction applications. Key Features Application suitability – Ideal for fastening steel purlins and light structural members in roofing, framing, and general construction. Design – Integrated flange on both bolt and nut spreads load and reduces the need for separate washers. Material quality – Manufactured from mild steel Class 4.6 for a dependable balance of strength and workability. Durability – Zinc-plated finish offers corrosion resistance for extended service life in standard environments. Installation – M12 x 30mm size with flanged hex head and nut allows quick, secure tightening with standard tools. Maintenance – Corrosion-resistant coating and robust construction minimise the need for ongoing maintenance. Versatility – Suitable for a wide range of steel connection tasks where a compact, flanged M12 fixing is required. [additional] Qty 100 Size 12 X 30 MM Finish Zinc

Read more less

The MFD Hex Flange Head C3 Galvanised Masonbolt M10-12 x 65mm (Box of 50) is engineered for secure, heavy-duty anchoring in masonry and concrete, delivering reliable performance where strong, permanent fixings are essential. Key Features Application suitability – Ideal for anchoring structural fixtures, brackets, and heavy equipment into masonry and concrete substrates. Design – Hex flange head provides excellent load distribution and grip, allowing high tightening torque and a clean, low-profile finish. Material quality – Manufactured from high-grade steel for consistent strength, reliability, and performance under demanding loads. Durability – C3 galvanised coating offers robust corrosion resistance, extending service life in standard and mildly corrosive environments. Installation – Designed for straightforward installation with standard tools, ensuring fast, secure fixing with minimal preparation. Maintenance – Low-maintenance solution that retains clamping force over time, reducing the need for periodic retightening. Versatility – M10-12 x 65mm size and box of 50 make it suitable for a wide range of commercial, industrial, and trade applications. [additional] QTY: 50PCS Head Type HEX FLANGED HEAD Size M10-12x65MM Finish GALVANISED

Read more less

The MFD Hex Flange Head C3 Galvanised Masonbolt M10-12 x 100mm (Box of 25) is engineered for secure, heavy-duty anchoring in masonry and concrete, delivering reliable performance where strong, permanent fixings are essential. Key Features Application suitability – Ideal for anchoring structural fixtures, brackets, and heavy equipment into masonry and concrete substrates. Design – Hex flange head provides excellent load distribution and grip, allowing high tightening torque and a clean, low-profile finish. Material quality – Manufactured from high-grade steel for consistent strength, reliability, and performance under demanding loads. Durability – C3 galvanised coating offers robust corrosion resistance, extending service life in standard and mildly corrosive environments. Installation – Designed for straightforward installation with standard tools, ensuring fast, secure fixing with minimal preparation. Maintenance – Low-maintenance solution that retains clamping force over time, reducing the need for periodic retightening. Versatility – M10-12 x 100mm size and box of 25 make it suitable for a wide range of commercial, industrial, and trade applications. [additional] QTY: 25PC Head Type HEX FLANGED HEAD Size M10-12x100MM Finish GALVANISED

Read more less

The 10x100 Screwbolt is a high-performance mechanical anchor designed for heavy-duty fixing into concrete, masonry, and other solid substrates, delivering secure, reliable hold for structural and safety-critical applications. Key Features Application suitability – Engineered specifically for heavy-duty anchoring in concrete, brick, blockwork, and other solid base materials. Design – High-thread, self-tapping design cuts a clean, secure thread in the substrate for maximum pull-out resistance. Material quality – Manufactured from premium-grade steel for consistent strength and performance under high loads. Durability – Corrosion-resistant finish helps protect against rust and wear, extending service life in demanding environments. Installation – Simple drill-and-drive installation with no need for plugs, allowing fast, clean, and adjustable fixing. Maintenance – Removable and re-usable in the same hole (subject to inspection), simplifying adjustments and replacements. Versatility – Suitable for fixing brackets, frames, rails, machinery, and safety-critical components across a wide range of projects. [additional] Size 10 x 100mm  Head Type Hex Head Thread Type Metric Screw thread Coating Galvanized Material Carbon Steel

Read more less