Irrigation & Watering

The Pope 12mm 4 Piece Watering Set is what you need to connect your hose to a tap. It includes 1 x 12mm Hose Connector, 1 x Hose Connector with Stop Valve, 1 x Universal Tap Adaptor and 1 x Nozzle.

The Hose Connector provides a secure, watertight connection between your hose and 12mm snap-on watering device. This fitting has been designed for a quick and easy snap on/off connection.

The Pope 12mm Hose Connector with Stop Valve allows fast and convenient connection and change of accessories at the hose outlet. On disconnecting, the water stops automatically and on connection of the dispensing device it flows again. This saves a trip to the tap when changing accessories such as a hand spray or sprinkler.

The Pope Universal Tap Adaptor is used to connect to either a 20mm (¾”) or 25mm (1”) BSP tap to 12mm snap on fittings.

The Pope Nozzle is ideal for general watering tasks around the yard. Simply turn the nozzle head to adjust the spray pattern from a wide cone spray to jet stream.

• Precision tooling ensures secure watertight connection with hose
• Includes: 1 x Universal Tap Adaptor, 1 x Hose Connector, 1 x Comfort Grip Hose Connector with Stop Valve and 1 x Nozzle
• Stop valve saves water by automatically stopping water flow when hand spray or sprinkler is removed
• Nozzle adjusts from wide spray to jet stream
• UV stabilised to withstand Australian conditions
• 2 year guarantee

The Pope 12mm x 3/4" American Thread Sprinkler Adaptor is inserted into either a hand spray or sprinkler with an American (3/4" GHT) thread, so it can be attached to a 12mm garden hose.

• Enables a 12mm hose to connect to a sprinkler or hand spray
• Suits American thread (¾” GHT) connections
• UV stabilised to withstand Australian conditions
• 2 Year guarantee

The Pope 12mm 3 Way Hose Coupler is used to connect three 12mm garden hoses together to extend the length of the hose.

• Suits 12mm garden hose
• Use to join three hoses together
• UV stabilised to withstand Australian conditions
• 2 year guarantee

The Pope 12mm 2 Way Hose Coupler is used to connect two 12mm garden hoses together to extend the length of the hose.

• Suits 12mm garden hose
• Use to join two hoses together
• UV stabilised to withstand Australian conditions
• 2 year guarantee

The Pope 12mm Hose Joiner/ Repairer is used to quickly and easily repair or join 12mm garden hose. The damaged hose part is simply cut out and the Hose Repairer is inserted into the affected area.

• Use to repair damaged hose or to join two hose lengths
• Suits 12mm garden hose
• UV stabilised to withstand Australian conditions
• 2 year guarantee

The Pope 12mm Hose Connector with Stop Valve allows fast and convenient connection and change of accessories at the hose outlet. On disconnecting, the water stops automatically and on connection of the dispensing device it flows again. This saves a trip to the tap when changing accessories such as a hand spray or sprinkler.

This fitting has been designed for quick and easy snap on/off connection.

• Precision tooling ensures secure watertight connection with hose
• Used to connect 12mm garden hose to 12mm watering device
• Stop valve prevents water flow when hand spray or nozzle is disconnected
• Allows fast and convenient connection and change of accessories at the hose outlet
• UV stabilised to withstand Australian conditions
• 2 year guarantee

The Pope 12mm Hose Connector provides a secure, watertight connection between your hose and 12mm snap-on watering device. This fitting has been ergonomically designed for quick and easy connection.

• Use with standard 12mm fittings
• Precision tooling ensures secure watertight connection with hose
• UV stabilised to withstand Australian conditions
• 1 year guarantee

The Pope Universal Tap Adaptor can be used to securely connect your 12mm garden hose to a tap for leak-free watering. It can be used to connect to either a 20mm (¾”) or 25mm (1”) BSP tap to 12mm snap on fittings.

• Secure and leak free connection
• Suits 20mm (3/4") and 25mm (1") BSP taps
• Use with 12mm hose connector
• UV stabilised to withstand Australian conditions
• 2 year guarantee

A true classic in garden care, the Partner Sprinkler is Pope’s original design that set the benchmark for reliable, efficient watering. Known for its durable construction and even water distribution, this iconic sprinkler has been a trusted choice for generations of gardeners. Designed with simplicity and performance in mind, the Partner remains a testament to Pope’s legacy of innovation in outdoor watering solutions.

• Sturdy metal sprinkler
• Designed for medium pressure conditions providing a full diffused spray
• Full circle coverage
• Waters up to 4.5 metre radius (9m Ø)
• Flow rate 31 L/min @ 250kPa
• Designed and tested in Australia

The Pope Trickler In-Line Stake 360° offers a variable water flow with multiple streams to apply water over a large area. Simply turn cap to adjust the flow rate. The height and elevation off the ground make it an ideal hassle-free watering solution for garden beds, borders, pots, baskets, trees and shrubs.

Push stake into ground into desired location then connect with 4mm flexible tube.

Note: For best results always use a pressure reducer and inline filter. Not recommended for pressures above 300 kPa.

• Multiple streams apply water over a larger area
• Spike pushes into ground to elevate trickler
• Variable flow rate
• Suits 4mm flexible poly tube
• Spray Pattern: Full circle
• Flow rate: 0-50 L/h @ 150 kPa
• UV stabilised to withstand Australian conditions

The Pope 2 Hour Tap Timer takes the worry out of watering. Simply push in the button under the dial while turning the dial to your selected watering time. Select watering time in 5 minute increments up to 2 hours, then the tap timer will shut off automatically when the set time has expired. The universal swivel tap nut can be fitted to either a 20mm or 25mm BSP tap.

This product is not suitable for use:

- if your water pressure exceeds 1000kPa - if you use a bore or unfiltered water - if you use any kind of pump to draw water - for commercial applications - if it is likely to be subject to more than seasonal amounts of water (e.g. in the path of sprinkles or other emitters, or with a leaking tap).

• Suits tap based watering: Hose, sprinkler, drip and spray systems
• Up to 2 hours watering time in 5 minute increments
• Connects straight onto garden tap - suits 20mm and 20mm BSP taps
• Manual override for timer-less water flow
• Mechanical timer, no batteries required
• UV stabilised to withstand Australian conditions

The Pope Simple Set Single Outlet Tap Timer will give you all the convenience of set and forget garden watering. This tap timer is simple to set for automatic watering and attaches directly to the tap.

Select watering run time from 1 minute up to 2 hours and frequency from 1 hour to 1 week.

The universal swivel tap nut can be fitted to either a 20mm or 25mm BSP tap.

This product is not suitable for use: - if your water pressure exceeds 800kPa - if you use a bore or unfiltered water - if you use any kind of pump to draw water - for commercial applications

• Solenoid valve operation for mains water application
• Connects straight onto garden tap - suits 20mm and 20mm BSP taps
• 1 min - 2 hour run time
• 1 Hour - 1 Week frequency
• Requires 2 x 1.5v AA alkaline batteries (not included)
• Operating pressure 100-800kPa
• 2 Year Guarantee
• UV stabilised to withstand Australian conditions

Drip Eze® extruded in-line drip tube is a precise, low flow irrigation product suited for a wide range of landscape applications, such as high density planting areas and intricately shaped landscape beds.

Drip Eze applies water to the plants at a slow consistent rate, reducing the risk of run-off and water wastage. Particularly suited to areas like median strip garden beds where overspray cannot be tolerated.

Drip Eze creates a wetted strip up to 50cm either side of the tube is ideal for covering with mulch. Typical installation methods include snaking the tube around a garden bed, creating a ring around a plant or laying out into a grid formation.

The visible emitter is easily aligned with plants for targeted watering and can be avoided when cutting through the tube, making it easier to insert the poly fittings.

• Self cleaning built-in filter in the emitter for added protection
• Two directly opposed outlet holes minimise chance of clogging
• Use with standard 13mm poly fittings
• For high density areas, intricate beds and vegetable gardens
• Discreet brown tubing blends into the landscape
• Discharge rate of 2.0 L/h @ 100 kPa
• Recommended operating pressure 100kPa
• UV stabilised to withstand Australian conditions
• Smart Drop Certified
• Made in Australia

Drip Eze® extruded in-line drip tube is a precise, low flow irrigation product suited for a wide range of landscape applications, such as high density planting areas and intricately shaped landscape beds.

Drip Eze applies water to the plants at a slow consistent rate, reducing the risk of run-off and water wastage. Particularly suited to areas like median strip garden beds where overspray cannot be tolerated.

Drip Eze creates a wetted strip up to 50cm either side of the tube is ideal for covering with mulch. Typical installation methods include snaking the tube around a garden bed, creating a ring around a plant or laying out into a grid formation.

The visible emitter is easily aligned with plants for targeted watering and can be avoided when cutting through the tube, making it easier to insert the poly fittings.

• Self cleaning built-in filter in the emitter for added protection
• Two directly opposed outlet holes minimise chance of clogging
• Use with standard 13mm poly fittings
• For high density areas, intricate beds and vegetable gardens
• Discreet brown tubing blends into the landscape
• Discharge rate of 2.0 L/h @ 100 kPa
• Recommended operating pressure 100kPa
• UV stabilised to withstand Australian conditions
• Smart Drop Certified
• Made in Australia

The Pope Universal Hold Down Stake securely holds 13mm or 19mm poly tubing in place and prevents tube from lifting and moving. The wide top makes hammering into place straightforward and the specially designed shape makes insertion into the soil easier.

Ensures a neat and tidy finish for your irrigation system. Ideal for bends and curves in garden.

• Prevents tube from lifting and moving
• Ideal to use for bends and curves in garden beds
• Wide top for straightforward hammering into place
• Designed for easier insertion to dirt
• Use with 13mm or 19mm tubing
• UV stabilised to withstand Australian conditions

The Pope 19mm Universal Nut & Tail is designed to connect 19mm poly pipe directly to a garden tap, making it an essential component for setting up your irrigation system. It fits both 20mm and 25mm BSP garden taps and should be secured to the tubing using a locking clamp or Loc-Sure® Clamp for a watertight connection.

• Use to connect 19mm poly tube to a garden tap
• Suits 20mm and 25mm BSP garden taps
• Secure with Locking Clamp or Loc-Sure® clamp
• Ensures reliable water flow with optimised internal design
• UV stabilised to withstand Australian conditions

The Pope 13mm Universal Nut & Tail is designed to connect 13mm poly pipe directly to a garden tap, making it an essential component for setting up your irrigation system. It fits both 20mm and 25mm BSP garden taps and should be secured to the tubing using a locking clamp or Loc-Sure® clamp for a watertight connection.

• Connects 13mm poly pipe to standard garden taps
• Fits 20mm and 25mm BSP tap threads
• Secure with Locking Clamp or Loc-Sure® clamp
• UV stabilised to withstand Australian conditions

•  Secure and leak free connection 
•  Suits 20mm (3/4") and 25mm (1") BSP taps
•   Use with 12mm hose connector
•  UV treated to withstand Australian conditions
•  2 year guarantee

• Used to connect 12mm garden hose to 12mm watering device 
• Comfortable grip for ease of use 
•  Use with standard 12mm fittings
•  Precision tooling ensures secure watertight connection with hose
•  UV treated to withstand Australian conditions
•  2 year guarantee

The Pope 12mm x 20mm BSP Sprinkler Adaptor is inserted into either a hand spray or sprinkler with a 20mm (3/4") BSP thread, so it can be attached to a 12mm garden hose.

• Enables a 12mm hose to connect to a 12mm sprinkler or hand spray
• Suits 20 mm (¾”) BSP connections
• UV stabilised to withstand Australian conditions
• 2 Year guarantee