Fasteners & Fixings

Coil Nail 2.5x57mm (Box) – Reliable Fixings for Tough Outdoor Jobs

Boost productivity and holding power on every project with these high‑performance Coil Nails 2.5x57mm. Designed for coil nailers, they deliver fast, consistent fastening for construction, fencing, and decking, even in demanding outdoor conditions. Ideal for framing, cladding, fence panels, joists, and deck boards where strength, speed, and durability matter.

Key Features

• Optimized 2.5x57mm size for secure penetration and strong holding power
• Coil format for rapid, continuous nailing and reduced reload time
• Ideal for timber construction, perimeter fencing, and garden decking projects
• Consistent shank and point quality for fewer jams and misfires
• Supplied in a convenient box for easy storage, handling, and site transport

[additional]

Gate Nail Coil 2.5x35mm is designed for secure fastening of gates, fencing, and timber structures in outdoor and agricultural projects, providing strong, reliable joints that withstand demanding environments.

Key Features

• Application suitability – Ideal for fixing timber gates, fence panels, rails, and general outdoor woodwork in farm, garden, and rural settings.
• Design – Collated in a compact coil for efficient, continuous nailing with compatible coil nailers, reducing reload time on larger jobs.
• Material quality – Manufactured from high-grade steel for consistent strength and dependable holding power in structural timber applications.
• Durability – Corrosion-resistant finish helps protect against moisture, weather, and outdoor contaminants for long-lasting performance.
• Installation – Optimized 2.5x35mm size ensures fast, clean penetration and secure anchoring while minimizing timber splitting.
• Maintenance – Low-maintenance fastening solution that reduces the need for frequent checks or replacements once installed correctly.
• Versatility – Suitable for a wide range of exterior carpentry, including gates, fencing, sheds, animal enclosures, and general farm structures.

Framing Nail 3.2x90mm (Box) – Reliable Fixings for Strong Timber Frames

Engineered for professional builders, these 3.2x90mm framing nails deliver secure, long‑lasting fixings for structural timber framing, wall studs, joists, and general construction. Ideal for high‑load applications, they drive cleanly, hold tight under stress, and help speed up framing work while maintaining structural integrity and alignment.

Key Features

• Optimal size: 3.2x90mm nails for strong penetration and superior holding power in framing timber
• Construction‑grade strength: Designed for structural framing, wall plates, rafters, and joists
• Consistent performance: Precision‑made for smooth driving and reduced jamming in nail guns
• Durable finish: Resistant to corrosion for long‑term indoor and outdoor use
• Bulk box supply: Convenient quantity for fast‑paced building sites and large framing projects

[additional]

AIRCO 0° Concrete Coil Nails Electro Galvanised are engineered for high-strength fastening into concrete and masonry, delivering secure, reliable holds for demanding construction, framing, and carpentry projects.

Key Features

• Application suitability – Purpose-built for fastening into concrete, brick, and other dense masonry substrates on site.
• Design – 0° coil configuration ensures smooth feeding and consistent driving in compatible coil nailers.
• Material quality – Manufactured from high-grade steel for optimal strength and resistance to bending under load.
• Durability – Electro-galvanised coating provides enhanced protection against corrosion in tough jobsite conditions.
• Installation – Collated in coils for fast, efficient nailing with reduced reload time and improved productivity.
• Maintenance – Clean, uniform shanks minimise tool wear and help keep nailers running smoothly with less downtime.
• Versatility – Ideal for structural fixing, framing, formwork, and general carpentry where concrete or masonry anchoring is required.

[additional]

Framing Nail 2.9x50mm (Box) – Reliable Fixings for Strong Timber Frames. Engineered for professional builders, these 2.9x50mm framing nails deliver secure, long‑lasting fixings for structural timber framing, wall studs, joists, and general construction. Optimised for high holding power and consistent drive, they help reduce callbacks, speed up installation, and improve overall build quality on site. Ideal for use with compatible framing nailers on residential, commercial, and renovation projects.

Key Features

• Size: 2.9x50mm – ideal for standard timber framing applications
• High holding power for strong, rigid structural connections
• Consistent performance in framing nailers for faster installation
• Durable finish to resist corrosion in demanding site conditions
• Boxed quantity for efficient, cost‑effective jobsite stocking

[additional]

The long shank screw eye is used when extra holding power is required on a wooden surface. It is suitable for both indoor and outdoor environments.

• 102mm overall length x 6.3mm thread diameter
• Dacromate plated
• 2 pieces per card

There are various ways of using and installing a long shank screw eye. For example, the long shank screw can be used to attach turnbuckles onto timber for general rigging applications.

The long shank screw can also be used to attach steel wires onto wooden posts for agricultural purposes such as cultivating crops to grow along the direction of the wire.

The screw eye is used for various applications from installation of picture wire to attaching ropes. Our screw eye range are available in numerous sizes catering to your needs.

• 73mm overall length x 7.6mm thread diameter
• Dacromate plated
• 2 pieces per card

It is strongly recommended to drill a pilot hole before fixing the screw eye into wood or plasterboard. Not designed for hanging heavy duty items (e.g. gymnastic equipments).

"Brad Lenght:50mm 
6000pcs/color box
Suitable for ELBNLI5005, ELBNLI5008
Ga18,1.25X1.0mm
Packed by color box"

VUETRADE Connector Plate Nails 33mm x 3.15mm (1kg) are purpose-designed for securely fastening connector plates in timber framing and general construction, providing reliable holding power and consistent performance on site.

Key Features

• Application suitability – Optimised for fixing connector plates in timber framing, trusses, and structural joinery.
• Design – Precision-sized 33mm x 3.15mm nails for accurate plate penetration and secure embedment in timber.
• Material quality – Manufactured from high-quality steel for consistent strength and dependable load transfer.
• Durability – Built to withstand demanding construction environments and long-term structural use.
• Installation – Compatible with standard nailing tools and easy to drive for fast, efficient plate fastening.
• Maintenance – Low-maintenance solution that helps maintain plate alignment and joint integrity over time.
• Versatility – Suitable for a wide range of timber construction applications where connector plates are required.

[additional]

Gang Nails – Framing Connectors [25–75mm x 90mm] are heavy-duty structural connectors designed for securely joining timber members in framing, trusses, and general construction. Engineered for high load transfer and consistent performance, they help create rigid, reliable joints in both residential and commercial builds.

Key Features

• Application suitability – Ideal for timber framing, roof trusses, joists, and general structural connections in light to medium construction.
• Design – Precision-punched plate with multiple nail holes for strong, even load distribution and secure timber-to-timber connections.
• Material quality – Manufactured from high-grade steel to ensure consistent strength and performance across all connectors.
• Durability – Corrosion-resistant finish helps protect against rust and environmental wear for long-term structural integrity.
• Installation – Simple to fix using standard nails or screws, with pre-punched holes that speed up alignment and fastening on site.
• Maintenance – Low-maintenance solution that requires only periodic visual inspection as part of routine structural checks.
• Versatility – Suitable for a range of timber sizes (25–75mm x 90mm) and adaptable to various framing layouts and design requirements.

[additional]

Framing Nail 2.9x50mm has a diameter of 2.9 millimetres and a length of 50 millimetres, specifically designed for use in framing construction. Framing nails are available in various lengths and gauges to accommodate different framing needs and materials. They are typically larger and more robust than nails used for finishing or trim work, as they need to provide strong and durable connections in the structural elements of a building.

[additional]

Framing Nail 3.2x90mm has a diameter of 3.2 millimetres and a length of 90 millimetres, specifically designed for use in framing construction. Framing nails are available in various lengths and gauges to accommodate different framing needs and materials. They are typically larger and more robust than nails used for finishing or trim work, as they need to provide strong and durable connections in the structural elements of a building.

[additional]

This 5mm x 150mm fastener (assumed to be a general-purpose construction screw/bolt) is designed for heavy-duty fastening in timber, masonry, and metal, making it ideal for structural framing, fixings, and renovation work where strong, reliable joints are essential.

Key Features

• Application suitability – Engineered for secure fastening in timber, masonry (with appropriate plugs), and metal for construction and renovation projects.
• Design – Long 150mm shank and 5mm diameter provide deep penetration and strong holding power in thick materials.
• Material quality – Manufactured from high-grade steel for consistent strength and load-bearing performance.
• Durability – Corrosion-resistant finish (e.g., zinc or similar coating) helps protect against rust in demanding site conditions.
• Installation – Compatible with standard drills or drivers; straightforward to install with good bite and minimal slippage when correctly pre-drilled.
• Maintenance – Low-maintenance fastener; periodic visual checks for corrosion or loosening are typically sufficient.
• Versatility – Suitable for framing, fixing brackets, securing plates, and other general-purpose structural and repair tasks.

[additional]

This 5mm x 150mm fastener (assumed to be a general-purpose construction screw/bolt) is designed for heavy-duty fastening in timber, masonry, and metal, making it ideal for structural framing, fixings, and renovation work where strong, reliable joints are essential.

Key Features

• Application suitability – Engineered for secure fastening in timber, masonry (with appropriate plugs), and metal for construction and renovation projects.
• Design – Long 150mm shank and 5mm diameter provide deep penetration and strong holding power in thick materials.
• Material quality – Manufactured from high-grade steel for consistent strength and load-bearing performance.
• Durability – Corrosion-resistant finish (e.g., zinc or similar coating) helps protect against rust in demanding site conditions.
• Installation – Compatible with standard drills or drivers; straightforward to install with good bite and minimal slippage when correctly pre-drilled.
• Maintenance – Low-maintenance fastener; periodic visual checks for corrosion or loosening are typically sufficient.
• Versatility – Suitable for framing, fixing brackets, securing plates, and other general-purpose structural and repair tasks.

Coil Nail 2.5x57mm (Single Pack) – Reliable Fixings for Tough Outdoor Jobs. The Coil Nail 2.5x57mm (Single Pack) delivers strong, consistent fastening for construction, fencing, and decking projects. Its 2.5x57mm size offers excellent penetration and holding power in timber, helping prevent loosening over time in high‑traffic or exposed outdoor areas. Ideal for framing, fence panels, decking boards, and general structural work where durability and speed of installation matter.

Key Features

• Optimized 2.5x57mm size for secure timber fastening
• Compatible with most standard coil nailers for fast application
• Strong holding power for construction, fencing, and decking
• Corrosion-resistant finish for long-lasting outdoor performance
• Supplied as a single pack – perfect for repairs, small jobs, or top-ups

[additional]

U bolts are used as rigging hardware designed to attach poles, wire cables and tubing to structures. They are also suitable for installations of pipe work.

• 5/16" bolt diameter x 75mm overall length. Fits 32-44mm pipe
• Dacromate plated finish for superior corrosion resistance.
• Supplied in a retailer pack of 2 pieces

To install a U bolt - 1. Place it around the pipe and push over to the fix structure 2. Put the plate into the two threaded ends 3. Insert nuts and washers.

U bolts are used as rigging hardware designed to attach poles, wire cables and tubing to structures. They are also suitable for installations of pipe work.

• 5/16" bolt diameter x 35mm overall length. Fits 25-35mm pipe
• Dacromate plated finish for superior corrosion resistance.
• Supplied in a retailer pack of 2 pieces

To install a U bolt - 1. Place it around the pipe and push over to the fix structure 2. Put the plate into the two threaded ends 3. Insert nuts and washers.

U bolts are used as rigging hardware designed to attach poles, wire cables and tubing to structures. They are also suitable for installations of pipe work.

• 1/4" bolt diameter x 51mm overall length. Fits 19-28mm pipe
• Dacromate plated finish for superior corrosion resistance.
• Supplied in a retailer pack of 2 pieces

To install a U bolt - 1. Place it around the pipe and push over to the fix structure 2. Put the plate into the two threaded ends 3. Insert nuts and washers.

The imperial threaded eye bolts are designed to ensure a safe and secure tie down attachment point for ropes, wires and cables. They are suitable for internal and external purposes.

• 102mm total length, 5/16" thread size
• Dacromate Plated
• Supplied in retailer pack of 2 pieces per card including nuts and washers.

These eye bolts are only to be used in DIY, domestic and light commercial applications. Not rated for industrial and heavy lifting purposes. Excessive load will cause the eye to open.

The imperial threaded eye bolts are designed to ensure a safe and secure tie down attachment point for ropes, wires and cables. They are suitable for internal and external purposes.

• 102mm total length, 3/8" thread size
• Dacromate Plated
• Supplied in retailer pack of 1 piece per card including nuts and washers.

These eye bolts are only to be used in DIY, domestic and light commercial applications. Not rated for industrial and heavy lifting purposes. Excessive load will cause the eye to open.

The imperial threaded eye bolts are designed to ensure a safe and secure tie down attachment point for ropes, wires and cables. They are suitable for internal and external purposes.

• 102mm total length, 1/4" thread size
• Dacromate Plated
• Supplied in retailer pack of 2 pieces per card including nuts and washers.

These eye bolts are only to be used in DIY, domestic and light commercial applications. Not rated for industrial and heavy lifting purposes. Excessive load will cause the eye to open.

Lifting Eye Nuts and Bolts are designed to provide a lifting point to attach a hook or rope prior to lifting heavy objects. They are suitable for outdoor environments (not marine environments).

• 8mm thread with 37mm overall diameter x 19mm diameter hole size. 0.1 tonne recommended working load
• Zinc plated steel to withstand outdoor weather environments.
• Priced per each piece. Bulk pack of 10 pieces available for purchase.

Ideal for lifting, hoisting, tensioning, or securing loads. Please note that they are not rated, thus not suitable for heavy duty industrial or marine environments.

Lifting Eye Nuts and Bolts are designed to provide a lifting point to attach a hook or rope prior to lifting heavy objects. They are suitable for outdoor environments.

• 12mm thread with 54mm overall diameter x 30mm diameter hole size. 0.34 tonne recommended working load
• Zinc plated steel to withstand outdoor weather environments.
• Priced per each piece. Bulk pack of 10 pieces available for purchase.

They are used in many heavy lifting applications. Please note that they are not rated, thus not suitable for heavy duty industrial or marine environments.

Lifting Eye Nuts and Bolts are designed to provide a lifting point to attach a hook or rope prior to lifting heavy objects. They are suitable for outdoor environments.

• 10mm thread with 44mm overall diameter x 24mm diameter hole size. 0.23 tonne recommended working load
• Zinc plated steel to withstand outdoor weather environments.
• Priced per each piece. Bulk pack of 10 pieces available for purchase.

They are used in many heavy lifting applications. Please note that they are not rated, thus not suitable for heavy duty industrial or marine environments.

These round eye swivel snap hooks provide a simple means to attach chain, rope, cable and other applications. They have spring loaded clip for a quick and convenient manner to close the loop.

• 20mm hook size (internal measurement)
• Nickel Plated
• Supplied in retailer pack of 1 piece per card.

The swivel hooks prevent the wires and chains from entanglement. With sturdy metal design, They are ideal for both indoor and outdoor purposes. Note that they are suitable for light duty use only.

These round eye swivel snap hooks provide a simple means to attach chain, rope, cable and other applications. They have spring loaded clip for a quick and convenient manner to close the loop.

• 12mm hook size (internal measurement)
• Nickel Plated
• Supplied in retailer pack of 1 piece per card.

The swivel hooks prevent the wires and chains from entanglement. With sturdy metal design, They are ideal for both indoor and outdoor purposes. Note that they are suitable for light duty use only.

The split links provide a quick and simple way of attaching proof coil chain to various rigging fittings or extending the length of chains by joining them together.

• 8mm thickness x 55mm overall length
• Hot dip galvanised steel to withstand maximum weather environments
• Supplied in a retailer pack of 2 pieces

The split links are mainly used for outdoor purposes. Please note that they are not intended for use in lifting applications.

The split links provide a quick and simple way of attaching proof coil chain to various rigging fittings or extending the length of chains by joining them together.

• 6mm thickness x 39mm overall length
• Hot dip galvanised steel to withstand maximum weather environments
• Supplied in a retailer pack of 2 pieces

The split links are mainly used for outdoor purposes. Please note that they are not intended for use in lifting applications.

The split links provide a quick and simple way of attaching proof coil chain to various rigging fittings or extending the length of chains by joining them together.

• 4mm thickness x 26mm overall length
• Hot dip galvanised steel to withstand maximum weather environments
• Supplied in a retailer pack of 2 pieces

The split links are mainly used for outdoor purposes. Please note that they are not intended for use in lifting applications.

The handy snap hooks provide a simple means to attach chain, rope, cable and other connecting applications. They have spring loaded hooks for a quick and convenient manner to close the loop.

• 8mm thick x 78mm Overall x 22mm Internal
• Zinc Plated metal
• Supplied in retailer pack of 1 piece per card

They feature sturdy metal design. Ideal for both indoor and outdoor purposes. Note that these handy snap hooks are suitable for domestic and light duty commercial use only. Not used for heavy lifting.

The handy snap hooks provide a simple means to attach chain, rope, cable and other connecting applications. They have spring loaded hooks for a quick and convenient manner to close the loop.

• 6mm thick x 59mm Overall x 17.8mm Internal
• Zinc Plated metal
• Supplied in retailer pack of 1 piece per card

They feature sturdy metal design. Ideal for both indoor and outdoor purposes. Note that these handy snap hooks are suitable for domestic and light duty commercial use only. Not used for heavy lifting.

The handy snap hooks provide a simple means to attach chain, rope, cable and other connecting applications. They have spring loaded hooks for a quick and convenient manner to close the loop.

• 5mm thick x 49mm Overall x 14.5 Internal
• Zinc Plated metal
• Supplied in retailer pack of 1 piece per card

They feature sturdy metal design. Ideal for both indoor and outdoor purposes. Note that these handy snap hooks are suitable for domestic and light duty commercial use only. Not used for heavy lifting.

The handy snap hooks provide a simple means to attach chain, rope, cable and other connecting applications. They have spring loaded hooks for a quick and convenient manner to close the loop.

• 10mm thick x 98mm Overall x 30mm Internal
• Zinc Plated metal
• Supplied in retailer pack of 1 piece per card

They feature sturdy metal design. Ideal for both indoor and outdoor purposes. Note that these handy snap hooks are suitable for domestic and light duty commercial use only. Not used for heavy lifting.

The long shank screw eye is used when extra holding power is required on a wooden surface. It is suitable for both indoor and outdoor environments.

• 76mm overall length x 4.9mm thread diameter
• Dacromate plated
• 2 pieces per card

There are various ways of using and installing a long shank screw eye. For example, the long shank screw can be used to attach turnbuckles onto timber for general rigging applications.

The long shank screw can also be used to attach steel wires onto wooden posts for agricultural purposes such as cultivating crops to grow along the direction of the wire.

The screw eye is used for various applications from installation of picture wire to attaching ropes. Our screw eye range are available in numerous sizes catering to your needs.

• 46mm overall length x 4.8mm thread diameter
• Dacromate plated
• 5 pieces per card

It is strongly recommended to drill a pilot hole before fixing the screw eye into wood or plasterboard. Not designed for hanging heavy duty items (e.g. gymnastic equipments).

Organise and hang your tools in the workshop with our pegboard and scanning hook range. Great accessory to have in the workshop to keep your tools organised and save valuable space.

• 75mm in hook length
• Zinc plated for corrosion resistance
• Priced for each piece. Bulk pack of 50 pieces available for purchase.

Our pegboard and scanning hooks fit all types of pegboard and slat wall installation unless otherwise stated. They are suitable for use in workshop, garage, retail shop and office situations.

Lifting Eye Nuts and Bolts are designed to provide a lifting point to attach a hook or rope prior to lifting heavy objects. They are suitable for outdoor environments.

• 8mm thread with 37mm overall diameter x 19mm diameter hole size. 0.1 tonne recommended working load
• Zinc plated steel to withstand outdoor weather environments.
• Priced per each piece. Bulk pack of 10 pieces available for purchase.

They are used in many heavy lifting applications. Please note that they are not rated, thus not suitable for heavy duty industrial or marine environments.

Lifting Eye Nuts and Bolts are designed to provide a lifting point to attach a hook or rope prior to lifting heavy objects. They are suitable for outdoor environments.

• 12mm thread with 54mm overall diameter x 30mm diameter hole size. 0.34 tonne recommended working load
• Zinc plated steel to withstand outdoor weather environments.
• Priced per each piece. Bulk pack of 10 pieces available for purchase.

They are used in many heavy lifting applications. Please note that they are not rated, thus not suitable for heavy duty industrial or marine environments.

Lifting Eye Nuts and Bolts are designed to provide a lifting point to attach a hook or rope prior to lifting heavy objects. They are suitable for outdoor environments.

• 10mm thread with 44mm overall diameter x 24mm diameter hole size. 0.23 tonne recommended working load
• Zinc plated steel to withstand outdoor weather environments.
• Priced per each piece. Bulk pack of 10 pieces available for purchase.

They are used in many heavy lifting applications. Please note that they are not rated, thus not suitable for heavy duty industrial or marine environments.