Drill Bits & Driver Accessories

"8*120
High quality TCT tip 
Chrome alloy steel shank
For heavy duty concrete and granite
Packed by double blister"

MACSIM Durabit HSS Step Drill 2-Flute Straight Titanium Coated 4-20(9 Steps) is a precision step drill designed to produce clean, accurately sized holes in metal, plastic, and wood, making it ideal for construction, electrical, and DIY projects where accuracy and finish matter.

Key Features

• Application suitability: Optimised for drilling into sheet metal, plastics, and timber commonly used in construction, electrical enclosures, and home projects.
• Design: 2-flute straight step design with 9 clearly marked steps from 4–20mm for smooth, controlled cutting and easy size identification.
• Material quality: Manufactured from high-speed steel (HSS) for reliable cutting performance and edge retention.
• Durability: Titanium coating reduces friction, heat build-up, and wear, extending tool life under frequent use.
• Installation: Standard shank fits most power drills, allowing quick setup and stable operation on-site or in the workshop.
• Maintenance: Low-maintenance design; simply clean after use and store dry to preserve the cutting edges and coating.
• Versatility: Single bit covers multiple hole sizes (4–20mm), reducing bit changes and tool clutter while handling a wide range of tasks.

[additional]

The SPAX Hardwood Step-drill 4 pre-drills and cuts a clean recess for the cylindrical head to avoid water collecting around the screw head. Pre-drilling is highly recommended to achieve a professional finish.

Features

• The SPAX Hardwood Step-drill 4 pre-drills and cuts a clean recess for the cylindrical head to avoid water collecting around the screw head. Pre-drilling is highly recommended to achieve a professional finish.

Technical Details

"Size:4-22mm
Step:4-6-8-10-12-14-16-18-20-22mm
Shank:round shank
Titanium finishing
Material:HSS 4341
Packed by double blister"

"HSS 4341
Diameter 12mm  
135°
Packed by double blister"

"10*120(3/8""X4-3/4"")
High quality TCT tip 
Chrome alloy steel shank
For heavy duty concrete and granite
Packed by double blister"

"HSS 4341
Diameter 10mm  
135°
Packed by double blister"

Monarch Drill Mixers are made with a durable, powder-coated steel construction and spiral head design for fast and effective paint mixing on site. Integrated hex drill shanks fit most standard drill chucks. Available in two sizes: suits 4-10L or 10-15L paint tins.

Features

• Powder-coated, durable steel shaft and mixing head is built to last
• Spiral head design for fast, even paint mixing
• Hex drill shank fits standard drill chucks
• Two sizes available: suits 4-10L or 10-15L paint tins

Technical Information

Features

TITANIUM NITRIDE COATING.

• Increased surface hardness to 85HRC.
• Ceramic surface, reducing friction by up to 30%.
• Especially resistant to cold welding.
• Suitable for cutting a wide range of materials.

The Titanium Nitride coating significantly increases the tool life by providing the following benefits:.

M2AL HIGH SPEED STEEL MATERIAL.

M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.

STEP HARDENED PROCESS.

This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is less susceptible to breakage than standard high speed steel cutters.

MULTI-CUT GEOMETRY.

Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centring.

FULLY GROUND WITH INTERNAL RELIEF.

This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.

UNIVERSAL SHANK.

19.05mm (3/4) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.

Pilot Pin To Suit - SP16004.

Specifications

Video

Holemaker Gold Series Annular Cutters

Features

TITANIUM NITRIDE COATING.

• Increased surface hardness to 85HRC.
• Ceramic surface, reducing friction by up to 30%.
• Especially resistant to cold welding.
• Suitable for cutting a wide range of materials.

The Titanium Nitride coating significantly increases the tool life by providing the following benefits:.

M2AL HIGH SPEED STEEL MATERIAL.

M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.

STEP HARDENED PROCESS.

This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is less susceptible to breakage than standard high speed steel cutters.

MULTI-CUT GEOMETRY.

Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centring.

FULLY GROUND WITH INTERNAL RELIEF.

This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.

UNIVERSAL SHANK.

19.05mm (3/4") Universal Shank with 2 flat sections to suit most magnetic base drilling machines.

Pilot Pin To Suit - SP16003.

Specifications

Video

Holemaker Gold Series Annular Cutters

Features

TITANIUM NITRIDE COATING.

• Increased surface hardness to 85HRC.
• Ceramic surface, reducing friction by up to 30%.
• Especially resistant to cold welding.
• Suitable for cutting a wide range of materials.

The Titanium Nitride coating significantly increases the tool life by providing the following benefits:.

M2AL HIGH SPEED STEEL MATERIAL.

M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.

STEP HARDENED PROCESS.

This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is less susceptible to breakage than standard high speed steel cutters.

MULTI-CUT GEOMETRY.

Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centring.

FULLY GROUND WITH INTERNAL RELIEF.

This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.

UNIVERSAL SHANK.

19.05mm (3/4) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.

Pilot Pin To Suit - SP16004.

Specifications

Video

Holemaker Gold Series Annular Cutters

Features

TITANIUM NITRIDE COATING.

• Increased surface hardness to 85HRC.
• Ceramic surface, reducing friction by up to 30%.
• Especially resistant to cold welding.
• Suitable for cutting a wide range of materials.

The Titanium Nitride coating significantly increases the tool life by providing the following benefits:.

M2AL HIGH SPEED STEEL MATERIAL.

M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.

STEP HARDENED PROCESS.

This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is less susceptible to breakage than standard high speed steel cutters.

MULTI-CUT GEOMETRY.

Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centring.

FULLY GROUND WITH INTERNAL RELIEF.

This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.

UNIVERSAL SHANK.

19.05mm (3/4") Universal Shank with 2 flat sections to suit most magnetic base drilling machines.

Pilot Pin To Suit - SP16003.

Specifications

Video

Holemaker Gold Series Annular Cutters

Features

TITANIUM NITRIDE COATING.

• Increased surface hardness to 85HRC.
• Ceramic surface, reducing friction by up to 30%.
• Especially resistant to cold welding.
• Suitable for cutting a wide range of materials.

The Titanium Nitride coating significantly increases the tool life by providing the following benefits:.

M2AL HIGH SPEED STEEL MATERIAL.

M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.

STEP HARDENED PROCESS.

This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is less susceptible to breakage than standard high speed steel cutters.

MULTI-CUT GEOMETRY.

Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centring.

FULLY GROUND WITH INTERNAL RELIEF.

This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.

UNIVERSAL SHANK.

19.05mm (3/4) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.

Pilot Pin To Suit - SP16004.

Specifications

Video

Holemaker Gold Series Annular Cutters

Features

TITANIUM NITRIDE COATING.

• Increased surface hardness to 85HRC.
• Ceramic surface, reducing friction by up to 30%.
• Especially resistant to cold welding.
• Suitable for cutting a wide range of materials.

The Titanium Nitride coating significantly increases the tool life by providing the following benefits:.

M2AL HIGH SPEED STEEL MATERIAL.

M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.

STEP HARDENED PROCESS.

This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is less susceptible to breakage than standard high speed steel cutters.

MULTI-CUT GEOMETRY.

Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centring.

FULLY GROUND WITH INTERNAL RELIEF.

This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.

UNIVERSAL SHANK.

19.05mm (3/4") Universal Shank with 2 flat sections to suit most magnetic base drilling machines.

Pilot Pin To Suit - SP16003.

Specifications

Video

Holemaker Gold Series Annular Cutters

Features

TITANIUM NITRIDE COATING.

• Increased surface hardness to 85HRC.
• Ceramic surface, reducing friction by up to 30%.
• Especially resistant to cold welding.
• Suitable for cutting a wide range of materials.

The Titanium Nitride coating significantly increases the tool life by providing the following benefits:.

M2AL HIGH SPEED STEEL MATERIAL.

M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.

STEP HARDENED PROCESS.

This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is less susceptible to breakage than standard high speed steel cutters.

MULTI-CUT GEOMETRY.

Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centring.

FULLY GROUND WITH INTERNAL RELIEF.

This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.

UNIVERSAL SHANK.

19.05mm (3/4") Universal Shank with 2 flat sections to suit most magnetic base drilling machines.

Pilot Pin To Suit - SP16003.

Specifications

Video

Holemaker Gold Series Annular Cutters

Features

TITANIUM NITRIDE COATING.

• Increased surface hardness to 85HRC.
• Ceramic surface, reducing friction by up to 30%.
• Especially resistant to cold welding.
• Suitable for cutting a wide range of materials.

The Titanium Nitride coating significantly increases the tool life by providing the following benefits:.

M2AL HIGH SPEED STEEL MATERIAL.

M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.

STEP HARDENED PROCESS.

This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is less susceptible to breakage than standard high speed steel cutters.

MULTI-CUT GEOMETRY.

Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centring.

FULLY GROUND WITH INTERNAL RELIEF.

This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.

UNIVERSAL SHANK.

19.05mm (3/4) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.

Pilot Pin To Suit - SP16004.

Specifications

Video

Holemaker Gold Series Annular Cutters

Features

TITANIUM NITRIDE COATING.

• Increased surface hardness to 85HRC.
• Ceramic surface, reducing friction by up to 30%.
• Especially resistant to cold welding.
• Suitable for cutting a wide range of materials.

The Titanium Nitride coating significantly increases the tool life by providing the following benefits:.

M2AL HIGH SPEED STEEL MATERIAL.

M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.

STEP HARDENED PROCESS.

This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is less susceptible to breakage than standard high speed steel cutters.

MULTI-CUT GEOMETRY.

Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centring.

FULLY GROUND WITH INTERNAL RELIEF.

This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.

UNIVERSAL SHANK.

19.05mm (3/4") Universal Shank with 2 flat sections to suit most magnetic base drilling machines.

Pilot Pin To Suit - SP16003.

Specifications

Video

Holemaker Gold Series Annular Cutters

Features

TITANIUM NITRIDE COATING.

• Increased surface hardness to 85HRC.
• Ceramic surface, reducing friction by up to 30%.
• Especially resistant to cold welding.
• Suitable for cutting a wide range of materials.

The Titanium Nitride coating significantly increases the tool life by providing the following benefits:.

M2AL HIGH SPEED STEEL MATERIAL.

M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.

STEP HARDENED PROCESS.

This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is less susceptible to breakage than standard high speed steel cutters.

MULTI-CUT GEOMETRY.

Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centring.

FULLY GROUND WITH INTERNAL RELIEF.

This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.

UNIVERSAL SHANK.

19.05mm (3/4) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.

Pilot Pin To Suit - SP16004.

Specifications

Video

Holemaker Gold Series Annular Cutters

Features

TITANIUM NITRIDE COATING.

• Increased surface hardness to 85HRC.
• Ceramic surface, reducing friction by up to 30%.
• Especially resistant to cold welding.
• Suitable for cutting a wide range of materials.

The Titanium Nitride coating significantly increases the tool life by providing the following benefits:.

M2AL HIGH SPEED STEEL MATERIAL.

M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.

STEP HARDENED PROCESS.

This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is less susceptible to breakage than standard high speed steel cutters.

MULTI-CUT GEOMETRY.

Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centring.

FULLY GROUND WITH INTERNAL RELIEF.

This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.

UNIVERSAL SHANK.

19.05mm (3/4") Universal Shank with 2 flat sections to suit most magnetic base drilling machines.

Pilot Pin To Suit - SP16003.

Specifications

Video

Holemaker Gold Series Annular Cutters

Features

TITANIUM NITRIDE COATING.

• Increased surface hardness to 85HRC.
• Ceramic surface, reducing friction by up to 30%.
• Especially resistant to cold welding.
• Suitable for cutting a wide range of materials.

The Titanium Nitride coating significantly increases the tool life by providing the following benefits:.

M2AL HIGH SPEED STEEL MATERIAL.

M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.

STEP HARDENED PROCESS.

This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is less susceptible to breakage than standard high speed steel cutters.

MULTI-CUT GEOMETRY.

Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centring.

FULLY GROUND WITH INTERNAL RELIEF.

This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.

UNIVERSAL SHANK.

19.05mm (3/4") Universal Shank with 2 flat sections to suit most magnetic base drilling machines.

Pilot Pin To Suit - SP16003.

Specifications

Video

Holemaker Gold Series Annular Cutters

Features

TITANIUM NITRIDE COATING.

• Increased surface hardness to 85HRC.
• Ceramic surface, reducing friction by up to 30%.
• Especially resistant to cold welding.
• Suitable for cutting a wide range of materials.

The Titanium Nitride coating significantly increases the tool life by providing the following benefits:.

M2AL HIGH SPEED STEEL MATERIAL.

M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.

STEP HARDENED PROCESS.

This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is less susceptible to breakage than standard high speed steel cutters.

MULTI-CUT GEOMETRY.

Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centring.

FULLY GROUND WITH INTERNAL RELIEF.

This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.

UNIVERSAL SHANK.

19.05mm (3/4) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.

Pilot Pin To Suit - SP16004.

Specifications

Video

Holemaker Gold Series Annular Cutters

Features

TITANIUM NITRIDE COATING.

• Increased surface hardness to 85HRC.
• Ceramic surface, reducing friction by up to 30%.
• Especially resistant to cold welding.
• Suitable for cutting a wide range of materials.

The Titanium Nitride coating significantly increases the tool life by providing the following benefits:.

M2AL HIGH SPEED STEEL MATERIAL.

M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.

STEP HARDENED PROCESS.

This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is less susceptible to breakage than standard high speed steel cutters.

MULTI-CUT GEOMETRY.

Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centring.

FULLY GROUND WITH INTERNAL RELIEF.

This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.

UNIVERSAL SHANK.

19.05mm (3/4") Universal Shank with 2 flat sections to suit most magnetic base drilling machines.

Pilot Pin To Suit - SP16003.

Specifications

Video

Holemaker Gold Series Annular Cutters

Features

TITANIUM NITRIDE COATING.

• Increased surface hardness to 85HRC.
• Ceramic surface, reducing friction by up to 30%.
• Especially resistant to cold welding.
• Suitable for cutting a wide range of materials.

The Titanium Nitride coating significantly increases the tool life by providing the following benefits:.

M2AL HIGH SPEED STEEL MATERIAL.

M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.

STEP HARDENED PROCESS.

This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is less susceptible to breakage than standard high speed steel cutters.

MULTI-CUT GEOMETRY.

Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centring.

FULLY GROUND WITH INTERNAL RELIEF.

This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.

UNIVERSAL SHANK.

19.05mm (3/4") Universal Shank with 2 flat sections to suit most magnetic base drilling machines.

Pilot Pin To Suit - SP16003.

Specifications

Video

Holemaker Gold Series Annular Cutters

Features

TITANIUM NITRIDE COATING.

• Increased surface hardness to 85HRC.
• Ceramic surface, reducing friction by up to 30%.
• Especially resistant to cold welding.
• Suitable for cutting a wide range of materials.

The Titanium Nitride coating significantly increases the tool life by providing the following benefits:.

M2AL HIGH SPEED STEEL MATERIAL.

M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.

STEP HARDENED PROCESS.

This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is less susceptible to breakage than standard high speed steel cutters.

MULTI-CUT GEOMETRY.

Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centring.

FULLY GROUND WITH INTERNAL RELIEF.

This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.

UNIVERSAL SHANK.

19.05mm (3/4") Universal Shank with 2 flat sections to suit most magnetic base drilling machines.

Pilot Pin To Suit - SP16003.

Specifications

Video

Holemaker Gold Series Annular Cutters

Features

TITANIUM NITRIDE COATING.

• Increased surface hardness to 85HRC.
• Ceramic surface, reducing friction by up to 30%.
• Especially resistant to cold welding.
• Suitable for cutting a wide range of materials.

The Titanium Nitride coating significantly increases the tool life by providing the following benefits:.

M2AL HIGH SPEED STEEL MATERIAL.

M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.

STEP HARDENED PROCESS.

This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is less susceptible to breakage than standard high speed steel cutters.

MULTI-CUT GEOMETRY.

Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centring.

FULLY GROUND WITH INTERNAL RELIEF.

This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.

UNIVERSAL SHANK.

19.05mm (3/4) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.

Pilot Pin To Suit - SP16004.

Specifications

Video

Holemaker Gold Series Annular Cutters

Features

TITANIUM NITRIDE COATING.

• Increased surface hardness to 85HRC.
• Ceramic surface, reducing friction by up to 30%.
• Especially resistant to cold welding.
• Suitable for cutting a wide range of materials.

The Titanium Nitride coating significantly increases the tool life by providing the following benefits:.

M2AL HIGH SPEED STEEL MATERIAL.

M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.

STEP HARDENED PROCESS.

This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is less susceptible to breakage than standard high speed steel cutters.

MULTI-CUT GEOMETRY.

Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centring.

FULLY GROUND WITH INTERNAL RELIEF.

This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.

UNIVERSAL SHANK.

19.05mm (3/4") Universal Shank with 2 flat sections to suit most magnetic base drilling machines.

Pilot Pin To Suit - SP16003.

Specifications

Video

Holemaker Gold Series Annular Cutters

Features

TITANIUM NITRIDE COATING.

• Increased surface hardness to 85HRC.
• Ceramic surface, reducing friction by up to 30%.
• Especially resistant to cold welding.
• Suitable for cutting a wide range of materials.

The Titanium Nitride coating significantly increases the tool life by providing the following benefits:.

M2AL HIGH SPEED STEEL MATERIAL.

M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.

STEP HARDENED PROCESS.

This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is less susceptible to breakage than standard high speed steel cutters.

MULTI-CUT GEOMETRY.

Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centring.

FULLY GROUND WITH INTERNAL RELIEF.

This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.

UNIVERSAL SHANK.

19.05mm (3/4) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.

Pilot Pin To Suit - SP16004.

Specifications

Video

Holemaker Gold Series Annular Cutters

Features

TITANIUM NITRIDE COATING.

• Increased surface hardness to 85HRC.
• Ceramic surface, reducing friction by up to 30%.
• Especially resistant to cold welding.
• Suitable for cutting a wide range of materials.

The Titanium Nitride coating significantly increases the tool life by providing the following benefits:.

M2AL HIGH SPEED STEEL MATERIAL.

M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.

STEP HARDENED PROCESS.

This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is less susceptible to breakage than standard high speed steel cutters.

MULTI-CUT GEOMETRY.

Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centring.

FULLY GROUND WITH INTERNAL RELIEF.

This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.

UNIVERSAL SHANK.

19.05mm (3/4") Universal Shank with 2 flat sections to suit most magnetic base drilling machines.

Pilot Pin To Suit - SP16003.

Specifications

Video

Holemaker Gold Series Annular Cutters

Features

NON-UNIFORM DISTANCES BETWEEN TEETH.

Vibration is reduced by the non-uniform and varied distances between the teeth.

ONE PIECE BODY STRUCTURE.

With a one piece structure, there is no play or flexing between the shank and cutting edge, resulting in sharp, crisp, smooth cutting.

SAFE STOPPER COLLAR.

Getting the holesaw stuck in the back of the cut material is prevented for safer, faster drilling.

Ejector spring fitted as standard. Not for impact use.

Specifications

Features

WIDE RANGE OF APPLICATIONS.

Suitable for drilling steel plate, stainless steel, A.C. sheeting, aluminium, FRP, PVC, fibreglass & concrete coated pipes.

TRIPLE-CUT 3 EDGE CUTTING SYSTEM.

There are two sets of three different edged cutting teeth. One tooth slanted outward, one inward and one that peaks in the centre. This arrangement balances the cutting effort for smooth boring, better control and less chance of excess drag.

ONE PIECE BODY STRUCTURE.

With a one piece structure, there is no play or flexing between the shank and cutting edge, resulting in sharp, crisp, smooth cutting.

SAFE STOPPER COLLAR.

Getting the holesaw stuck in the back of the cut material is prevented for safer, faster drilling.

Specifications

Features

NON-UNIFORM DISTANCES BETWEEN TEETH.

Vibration is reduced by the non-uniform and varied distances between the teeth.

ONE PIECE BODY STRUCTURE.

With a one piece structure, there is no play or flexing between the shank and cutting edge, resulting in sharp, crisp, smooth cutting.

SAFE STOPPER COLLAR.

Getting the holesaw stuck in the back of the cut material is prevented for safer, faster drilling.

Ejector spring fitted as standard. Not for impact use.

Specifications

Features

WIDE RANGE OF APPLICATIONS.

Suitable for drilling steel plate, stainless steel, A.C. sheeting, aluminium, FRP, PVC, fibreglass & concrete coated pipes.

TRIPLE-CUT 3 EDGE CUTTING SYSTEM.

There are two sets of three different edged cutting teeth. One tooth slanted outward, one inward and one that peaks in the centre. This arrangement balances the cutting effort for smooth boring, better control and less chance of excess drag.

ONE PIECE BODY STRUCTURE.

With a one piece structure, there is no play or flexing between the shank and cutting edge, resulting in sharp, crisp, smooth cutting.

SAFE STOPPER COLLAR.

Getting the holesaw stuck in the back of the cut material is prevented for safer, faster drilling.

Specifications

Features

NON-UNIFORM DISTANCES BETWEEN TEETH.

Vibration is reduced by the non-uniform and varied distances between the teeth.

ONE PIECE BODY STRUCTURE.

With a one piece structure, there is no play or flexing between the shank and cutting edge, resulting in sharp, crisp, smooth cutting.

SAFE STOPPER COLLAR.

Getting the holesaw stuck in the back of the cut material is prevented for safer, faster drilling.

Ejector spring fitted as standard. Not for impact use.

Specifications

Features

WIDE RANGE OF APPLICATIONS.

Suitable for drilling steel plate, stainless steel, A.C. sheeting, aluminium, FRP, PVC, fibreglass & concrete coated pipes.

TRIPLE-CUT 3 EDGE CUTTING SYSTEM.

There are two sets of three different edged cutting teeth. One tooth slanted outward, one inward and one that peaks in the centre. This arrangement balances the cutting effort for smooth boring, better control and less chance of excess drag.

ONE PIECE BODY STRUCTURE.

With a one piece structure, there is no play or flexing between the shank and cutting edge, resulting in sharp, crisp, smooth cutting.

SAFE STOPPER COLLAR.

Getting the holesaw stuck in the back of the cut material is prevented for safer, faster drilling.

Specifications

Features

WIDE RANGE OF APPLICATIONS.

Suitable for drilling steel plate, stainless steel, A.C. sheeting, aluminium, FRP, PVC, fibreglass & concrete coated pipes.

TRIPLE-CUT 3 EDGE CUTTING SYSTEM.

There are two sets of three different edged cutting teeth. One tooth slanted outward, one inward and one that peaks in the centre. This arrangement balances the cutting effort for smooth boring, better control and less chance of excess drag.

ONE PIECE BODY STRUCTURE.

With a one piece structure, there is no play or flexing between the shank and cutting edge, resulting in sharp, crisp, smooth cutting.

SAFE STOPPER COLLAR.

Getting the holesaw stuck in the back of the cut material is prevented for safer, faster drilling.

Specifications

Features

WIDE RANGE OF APPLICATIONS.

Suitable for drilling steel plate, stainless steel, A.C. sheeting, aluminium, FRP, PVC, fibreglass & concrete coated pipes.

TRIPLE-CUT 3 EDGE CUTTING SYSTEM.

There are two sets of three different edged cutting teeth. One tooth slanted outward, one inward and one that peaks in the centre. This arrangement balances the cutting effort for smooth boring, better control and less chance of excess drag.

ONE PIECE BODY STRUCTURE.

With a one piece structure, there is no play or flexing between the shank and cutting edge, resulting in sharp, crisp, smooth cutting.

SAFE STOPPER COLLAR.

Getting the holesaw stuck in the back of the cut material is prevented for safer, faster drilling.

Specifications

Features

NON-UNIFORM DISTANCES BETWEEN TEETH.

Vibration is reduced by the non-uniform and varied distances between the teeth.

ONE PIECE BODY STRUCTURE.

With a one piece structure, there is no play or flexing between the shank and cutting edge, resulting in sharp, crisp, smooth cutting.

SAFE STOPPER COLLAR.

Getting the holesaw stuck in the back of the cut material is prevented for safer, faster drilling.

Ejector spring fitted as standard. Not for impact use.

Specifications

Features

A pilot pin serves three main purposes:

• Ejects the slug at the end of the cut.
• Provides coolant feed into the centre of the cutter.
• Locates the centre of the cut.

Specifications

Features

A pilot pin serves three main purposes:

• Ejects the slug at the end of the cut.
• Provides coolant feed into the centre of the cutter.
• Locates the centre of the cut.

Specifications