Shackles & Eyelets

Grade S screw pin bow shackles are most commonly used for lifting applications, providing connections to chain, wire rope and other rated fittings within the marine, agricultural, mining and engineering industries.

• Conforms to AS2741 manufactured from Grade S material in bow configuration with screw pin hot dipped galvanised.
• Marked with working load limit in T, quality grade, batch numbered, nominal size in mm and supplier identification.
• Proof tested to 2 x working load limit, with a minimum break force of 6 x working load limit.
• Test certificates are available upon request. Also available in black color in all sizes upon request.
• Suitable for lifting applications.

Please note:

With shackles in high temperatures, both grade S and grade M need the following derating if used in applications higher than 200 degrees Celsius. If used between 200 to 300 degrees then a 10% derate is needed If used between 300 to 400 degrees then a 25% derate is needed Above 400 degrees neither shackle can be used.

Grade S screw pin bow shackles are most commonly used for lifting applications, providing connections to chain, wire rope and other rated fittings within the marine, agricultural, mining and engineering industries.

• Conforms to AS2741 manufactured from Grade S material in bow configuration with screw pin hot dipped galvanised.
• Marked with working load limit in T, quality grade, batch numbered, nominal size in mm and supplier identification.
• Proof tested to 2 x working load limit, with a minimum break force of 6 x working load limit.
• Test certificates are available upon request. Also available in black color in all sizes upon request.
• Suitable for lifting applications.

Please note:

With shackles in high temperatures, both grade S and grade M need the following derating if used in applications higher than 200 degrees Celsius. If used between 200 to 300 degrees then a 10% derate is needed If used between 300 to 400 degrees then a 25% derate is needed Above 400 degrees neither shackle can be used.

Bow Shackles are a quick and easy method used to connect and disconnect a range of rigging jobs, lifting, towing and tying down loads.

• Has a certified load capacity of 1T. WLL (Working Load Limit) information is stamped on the body.
• Hot dip galvanised for durability, Bow Shackles are easily recognised by the yellow Pin
• Supplied in card of (1)

The bow shape makes connections at any angle to be possible. Please note that the load angle can affect the working load limit.

It is also used widely throughout the 4WD off road industry to connect to a Snatch Block for winching purposes in the recovery of a stranded vehicle.

Bow Shackles are a quick and easy method used to connect and disconnect a range of rigging jobs, lifting, towing and tying down loads.

• Has a certified load capacity of 1.5T. WLL (Working Load Limit) information is stamped on the body.
• Hot dip galvanised for durability, Bow Shackles are easily recognised by the yellow Pin
• Supplied in card of (1)

The bow shape makes connections at any angle to be possible. Please note that the load angle can affect the working load limit.

It is also used widely throughout the 4WD off road industry to connect to a Snatch Block for winching purposes in the recovery of a stranded vehicle.

Bow Shackles are a quick and easy method used to connect and disconnect a range of rigging jobs, lifting, towing and tying down loads.

• Has a certified load capacity of 2T. WLL (Working Load Limit) information is stamped on the body.
• Hot dip galvanised for durability, Bow Shackles are easily recognised by the yellow Pin
• The bow shape makes connections at any angle to be possible. Please note that the load angle can affect the working load limit.

It is also used widely throughout the 4WD off road industry to connect to a Snatch Block for winching purposes in the recovery of a stranded vehicle.

Bow Shackles are a quick and easy method used to connect and disconnect a range of rigging jobs, lifting, towing and tying down loads.

• Has a certified load capacity of 0.5T. WLL (Working Load Limit) information is stamped on the body.
• Hot dip galvanised for durability, Bow Shackles are easily recognised by the yellow Pin
• Supplied in card of (1)

The bow shape makes connections at any angle to be possible. Please note that the load angle can affect the working load limit.

It is also used widely throughout the 4WD off road industry to connect to a Snatch Block for winching purposes in the recovery of a stranded vehicle.

Bow Shackles are a quick and easy method used to connect and disconnect a range of rigging jobs, lifting, towing and tying down loads.

• Has a certified load capacity of 0.75T. WLL (Working Load Limit) information is stamped on the body.
• Hot dip galvanised for durability, Bow Shackles are easily recognised by the yellow Pin
• Supplied in card of (1)

The bow shape makes connections at any angle to be possible. Please note that the load angle can affect the working load limit.

It is also used widely throughout the 4WD off road industry to connect to a Snatch Block for winching purposes in the recovery of a stranded vehicle.

D Shackles are a quick and easy method used to connect and disconnect a range of rigging jobs, lifting, towing and tying down loads.

• Used to attach shade sail cables to turnbuckles
• Hot dip galvanised for durability
• Suitable for 10mm chain

Due to the shape, side and racking loads may bend the shackle. Safety tip: Thread a tie wire through the pin hole and attach to shackle to prevent from loosening.

D Shackles are a quick and easy method used to connect and disconnect a range of rigging jobs, lifting, towing and tying down loads.

• Used to attach shade sail cables to turnbuckles
• Hot dip galvanised for durability
• Suitable for 12mm chain

Due to the shape, side and racking loads may bend the shackle. Safety tip: Thread a tie wire through the pin hole and attach to shackle to prevent from loosening.

D Shackles are a quick and easy method used to connect and disconnect a range of rigging jobs, lifting, towing and tying down loads.

• Used to attach shade sail cables to turnbuckles
• Hot dip galvanised for durability
• Suitable for chain up to 5mm

Due to the shape, side and racking loads may bend the shackle. Safety tip: Thread a tie wire through the pin hole and attach to shackle to prevent from loosening.

D Shackles are a quick and easy method used to connect and disconnect a range of rigging jobs, lifting, towing and tying down loads.

• Used to attach shade sail cables to turnbuckles
• Hot dip galvanised for durability
• Suitable for 6mm chain

Due to the shape, side and racking loads may bend the shackle. Safety tip: Thread a tie wire through the pin hole and attach to shackle to prevent from loosening.

D Shackles are a quick and easy method used to connect and disconnect a range of rigging jobs, lifting, towing and tying down loads.

• Used to attach shade sail cables to turnbuckles
• Hot dip galvanised for durability
• Suitable for 8mm chain

Due to the shape, side and racking loads may bend the shackle. Safety tip: Thread a tie wire through the pin hole and attach to shackle to prevent from loosening.

D Shackles are a quick and easy method used to connect and disconnect a range of rigging jobs, towing and tying down loads.

• Used to attach shade sail cables to turnbuckles
• Suitable for 10mm chain
• Rated to 1T

Due to the shape, side and racking loads may bend the shackle. Safety tip: Thread a tie wire through the pin hole and attach to shackle to prevent from loosening.

D Shackles are a quick and easy method used to connect and disconnect a range of rigging jobs, lifting, towing and tying down loads.

• Has a certified load capacity of 1T
• Hot dip galvanised for durability
• Suitable for 10mm chain

Due to the shape, side and racking loads may bend the shackle. A piece of equipment that is mandatory for towing (rated shackles only).

D Shackles are a quick and easy method used to connect and disconnect a range of rigging jobs, lifting, towing and tying down loads.

• Has a certified load capacity of 1.5T
• Hot dip galvanised for durability
• Suitable for 11mm chain

Due to the shape, side and racking loads may bend the shackle. A piece of equipment that is mandatory for towing (rated shackles only).

D Shackles are a quick and easy method used to connect and disconnect a range of rigging jobs, lifting, towing and tying down loads.

• Has a certified load capacity of 2T
• Hot dip galvanised for durability
• Suitable for 13mm chain

Due to the shape, side and racking loads may bend the shackle. A piece of equipment that is mandatory for towing (rated shackles only).

D Shackles are a quick and easy method used to connect and disconnect a range of rigging jobs, lifting, towing and tying down loads.

• Has a certified load capacity of 0.5T
• Hot dip galvanised for durability
• Suitable for 6mm chain

Due to the shape, side and racking loads may bend the shackle. Safety tip: Thread a tie wire through the pin hole and attach to shackle to prevent from loosening.

D Shackles are a quick and easy method used to connect and disconnect a range of rigging jobs, lifting, towing and tying down loads.

• Has a certified load capacity of 0.75T
• Hot dip galvanised for durability
• Suitable for 8mm chain

Due to the shape, side and racking loads may bend the shackle. A piece of equipment that is mandatory for towing (rated shackles only).