Starrett arbors and accessories are engineered to hold and drive Starrett hole saws accurately and safely. Pilot drills keep the saw centred and prevent wandering, while arbors and extensions provide the right shank and reach for the job. Suitable for use with hole saws from 14mm (9/16in) to 210mm (8-9/32in) diameter.

Key features

• Genuine Starrett fit for secure, accurate hole-saw mounting
• Precision-ground pilot drill for clean centring and reduced wander
• Hardened components for long service life
• Matched to the recommended Starrett hole-saw ranges

Specifications

Starrett arbors and accessories are engineered to hold and drive Starrett hole saws accurately and safely. Pilot drills keep the saw centred and prevent wandering, while arbors and extensions provide the right shank and reach for the job. Suitable for use with hole saws from 14mm (9/16in) to 210mm (8-9/32in) diameter.

Key features

• Genuine Starrett fit for secure, accurate hole-saw mounting
• Precision-ground pilot drill for clean centring and reduced wander
• Hardened components for long service life
• Matched to the recommended Starrett hole-saw ranges

Specifications

Starrett arbors and accessories are engineered to hold and drive Starrett hole saws accurately and safely. Pilot drills keep the saw centred and prevent wandering, while arbors and extensions provide the right shank and reach for the job. Suitable for use with hole saws from 14mm (9/16in) to 210mm (8-9/32in) diameter.

Key features

• Genuine Starrett fit for secure, accurate hole-saw mounting
• Precision-ground pilot drill for clean centring and reduced wander
• Hardened components for long service life
• Matched to the recommended Starrett hole-saw ranges

Specifications

Starrett arbors and accessories are engineered to hold and drive Starrett hole saws accurately and safely. Pilot drills keep the saw centred and prevent wandering, while arbors and extensions provide the right shank and reach for the job. Suitable for use with hole saws from 14mm (9/16in) to 210mm (8-9/32in) diameter.

Key features

• Genuine Starrett fit for secure, accurate hole-saw mounting
• Precision-ground pilot drill for clean centring and reduced wander
• Hardened components for long service life
• Matched to the recommended Starrett hole-saw ranges

Specifications

Starrett arbors and accessories are engineered to hold and drive Starrett hole saws accurately and safely. Pilot drills keep the saw centred and prevent wandering, while arbors and extensions provide the right shank and reach for the job. Suitable for use with hole saws from 14mm (9/16in) to 210mm (8-9/32in) diameter.

Key features

• Genuine Starrett fit for secure, accurate hole-saw mounting
• Precision-ground pilot drill for clean centring and reduced wander
• Hardened components for long service life
• Matched to the recommended Starrett hole-saw ranges

Specifications

The Starrett Bi-Metal Cordless Smooth Cut (CSC) hole saw is constructed of hardened, heat and abrasion resisting high speed steel teeth with a tough alloy body and cap for exceptional strength, durability and shatter resistance. Designed for battery-operated power tools, it cuts twice as many holes per charge as an equivalent standard hole saw. Supplied as a complete assembly including arbor and pilot drill, its flared base cap limits cutting depth to 1/2in.

Key features

• Complete assembly - no need to buy a separate arbor or pilot drill
• Ideal for on-site work with battery-operated power tools; twice as many holes per charge
• Constant-pitch 8 TPI teeth for exceptionally smooth cuts
• Safety stop at the base prevents drilling beyond the maximum cutting depth
• Recommended cutting depth 2mm

Specifications

The Starrett Bi-Metal Cordless Smooth Cut (CSC) hole saw is constructed of hardened, heat and abrasion resisting high speed steel teeth with a tough alloy body and cap for exceptional strength, durability and shatter resistance. Designed for battery-operated power tools, it cuts twice as many holes per charge as an equivalent standard hole saw. Supplied as a complete assembly including arbor and pilot drill, its flared base cap limits cutting depth to 1/2in.

Key features

• Complete assembly - no need to buy a separate arbor or pilot drill
• Ideal for on-site work with battery-operated power tools; twice as many holes per charge
• Constant-pitch 8 TPI teeth for exceptionally smooth cuts
• Safety stop at the base prevents drilling beyond the maximum cutting depth
• Recommended cutting depth 2mm

Specifications

The Starrett Bi-Metal Cordless Smooth Cut (CSC) hole saw is constructed of hardened, heat and abrasion resisting high speed steel teeth with a tough alloy body and cap for exceptional strength, durability and shatter resistance. Designed for battery-operated power tools, it cuts twice as many holes per charge as an equivalent standard hole saw. Supplied as a complete assembly including arbor and pilot drill, its flared base cap limits cutting depth to 1/2in.

Key features

• Complete assembly - no need to buy a separate arbor or pilot drill
• Ideal for on-site work with battery-operated power tools; twice as many holes per charge
• Constant-pitch 8 TPI teeth for exceptionally smooth cuts
• Safety stop at the base prevents drilling beyond the maximum cutting depth
• Recommended cutting depth 2mm

Specifications

The Starrett Bi-Metal Cordless Smooth Cut (CSC) hole saw is constructed of hardened, heat and abrasion resisting high speed steel teeth with a tough alloy body and cap for exceptional strength, durability and shatter resistance. Designed for battery-operated power tools, it cuts twice as many holes per charge as an equivalent standard hole saw. Supplied as a complete assembly including arbor and pilot drill, its flared base cap limits cutting depth to 1/2in.

Key features

• Complete assembly - no need to buy a separate arbor or pilot drill
• Ideal for on-site work with battery-operated power tools; twice as many holes per charge
• Constant-pitch 8 TPI teeth for exceptionally smooth cuts
• Safety stop at the base prevents drilling beyond the maximum cutting depth
• Recommended cutting depth 2mm

Specifications

The Starrett Fast Cut (FCH) constant-pitch bi-metal hole saw combines a new tooth material with extra cobalt for enhanced heat and wear resistance and an improved tooth design, delivering a smoother, faster cut across a wide range of materials. It is especially effective on stainless and mild steel sheet and can cut tube with a wall thickness up to 3mm (1/8in).

Key features

• New tooth material with extra cobalt for enhanced heat and wear resistance
• 5.5 TPI positive-rake tooth form for less torque and a smoother, faster cut
• 30% extra gullet volume for better material penetration
• Cuts stainless steel, mild steel sheet and tube, and materials up to 13mm (1/2in) thick
• Suits standard arbors (A1, A4, A1-1 SDS-Plus, A6/A6-2 Kwik-Change); pilot drill A014C

Specifications

The Starrett Fast Cut (FCH) constant-pitch bi-metal hole saw combines a new tooth material with extra cobalt for enhanced heat and wear resistance and an improved tooth design, delivering a smoother, faster cut across a wide range of materials. It is especially effective on stainless and mild steel sheet and can cut tube with a wall thickness up to 3mm (1/8in).

Key features

• New tooth material with extra cobalt for enhanced heat and wear resistance
• 5.5 TPI positive-rake tooth form for less torque and a smoother, faster cut
• 30% extra gullet volume for better material penetration
• Cuts stainless steel, mild steel sheet and tube, and materials up to 13mm (1/2in) thick
• Suits standard arbors (A1, A4, A1-1 SDS-Plus, A6/A6-2 Kwik-Change); pilot drill A014C

Specifications

The Starrett Fast Cut (FCH) constant-pitch bi-metal hole saw combines a new tooth material with extra cobalt for enhanced heat and wear resistance and an improved tooth design, delivering a smoother, faster cut across a wide range of materials. It is especially effective on stainless and mild steel sheet and can cut tube with a wall thickness up to 3mm (1/8in).

Key features

• New tooth material with extra cobalt for enhanced heat and wear resistance
• 5.5 TPI positive-rake tooth form for less torque and a smoother, faster cut
• 30% extra gullet volume for better material penetration
• Cuts stainless steel, mild steel sheet and tube, and materials up to 13mm (1/2in) thick
• Suits standard arbors (A1, A4, A1-1 SDS-Plus, A6/A6-2 Kwik-Change); pilot drill A014C

Specifications

The Starrett Fast Cut (FCH) constant-pitch bi-metal hole saw combines a new tooth material with extra cobalt for enhanced heat and wear resistance and an improved tooth design, delivering a smoother, faster cut across a wide range of materials. It is especially effective on stainless and mild steel sheet and can cut tube with a wall thickness up to 3mm (1/8in).

Key features

• New tooth material with extra cobalt for enhanced heat and wear resistance
• 5.5 TPI positive-rake tooth form for less torque and a smoother, faster cut
• 30% extra gullet volume for better material penetration
• Cuts stainless steel, mild steel sheet and tube, and materials up to 13mm (1/2in) thick
• Suits standard arbors (A1, A4, A1-1 SDS-Plus, A6/A6-2 Kwik-Change); pilot drill A014C

Specifications

The Starrett Fast Cut (FCH) constant-pitch bi-metal hole saw combines a new tooth material with extra cobalt for enhanced heat and wear resistance and an improved tooth design, delivering a smoother, faster cut across a wide range of materials. It is especially effective on stainless and mild steel sheet and can cut tube with a wall thickness up to 3mm (1/8in).

Key features

• New tooth material with extra cobalt for enhanced heat and wear resistance
• 5.5 TPI positive-rake tooth form for less torque and a smoother, faster cut
• 30% extra gullet volume for better material penetration
• Cuts stainless steel, mild steel sheet and tube, and materials up to 13mm (1/2in) thick
• Suits standard arbors (A1, A4, A1-1 SDS-Plus, A6/A6-2 Kwik-Change); pilot drill A014C

Specifications

The Starrett Fast Cut (FCH) constant-pitch bi-metal hole saw combines a new tooth material with extra cobalt for enhanced heat and wear resistance and an improved tooth design, delivering a smoother, faster cut across a wide range of materials. It is especially effective on stainless and mild steel sheet and can cut tube with a wall thickness up to 3mm (1/8in).

Key features

• New tooth material with extra cobalt for enhanced heat and wear resistance
• 5.5 TPI positive-rake tooth form for less torque and a smoother, faster cut
• 30% extra gullet volume for better material penetration
• Cuts stainless steel, mild steel sheet and tube, and materials up to 13mm (1/2in) thick
• Suits standard arbors (A1, A4, A1-1 SDS-Plus, A6/A6-2 Kwik-Change); pilot drill A014C

Specifications

The Starrett Fast Cut (FCH) constant-pitch bi-metal hole saw combines a new tooth material with extra cobalt for enhanced heat and wear resistance and an improved tooth design, delivering a smoother, faster cut across a wide range of materials. It is especially effective on stainless and mild steel sheet and can cut tube with a wall thickness up to 3mm (1/8in).

Key features

• New tooth material with extra cobalt for enhanced heat and wear resistance
• 5.5 TPI positive-rake tooth form for less torque and a smoother, faster cut
• 30% extra gullet volume for better material penetration
• Cuts stainless steel, mild steel sheet and tube, and materials up to 13mm (1/2in) thick
• Suits standard arbors (A1, A4, A1-1 SDS-Plus, A6/A6-2 Kwik-Change); pilot drill A014C

Specifications

The Starrett Fast Cut (FCH) constant-pitch bi-metal hole saw combines a new tooth material with extra cobalt for enhanced heat and wear resistance and an improved tooth design, delivering a smoother, faster cut across a wide range of materials. It is especially effective on stainless and mild steel sheet and can cut tube with a wall thickness up to 3mm (1/8in).

Key features

• New tooth material with extra cobalt for enhanced heat and wear resistance
• 5.5 TPI positive-rake tooth form for less torque and a smoother, faster cut
• 30% extra gullet volume for better material penetration
• Cuts stainless steel, mild steel sheet and tube, and materials up to 13mm (1/2in) thick
• Suits standard arbors (A1, A4, A1-1 SDS-Plus, A6/A6-2 Kwik-Change); pilot drill A014C

Specifications

The Starrett Fast Cut (FCH) constant-pitch bi-metal hole saw combines a new tooth material with extra cobalt for enhanced heat and wear resistance and an improved tooth design, delivering a smoother, faster cut across a wide range of materials. It is especially effective on stainless and mild steel sheet and can cut tube with a wall thickness up to 3mm (1/8in).

Key features

• New tooth material with extra cobalt for enhanced heat and wear resistance
• 5.5 TPI positive-rake tooth form for less torque and a smoother, faster cut
• 30% extra gullet volume for better material penetration
• Cuts stainless steel, mild steel sheet and tube, and materials up to 13mm (1/2in) thick
• Suits standard arbors (A1, A4, A1-1 SDS-Plus, A6/A6-2 Kwik-Change); pilot drill A014C

Specifications

The Starrett Fast Cut (FCH) constant-pitch bi-metal hole saw combines a new tooth material with extra cobalt for enhanced heat and wear resistance and an improved tooth design, delivering a smoother, faster cut across a wide range of materials. It is especially effective on stainless and mild steel sheet and can cut tube with a wall thickness up to 3mm (1/8in).

Key features

• New tooth material with extra cobalt for enhanced heat and wear resistance
• 5.5 TPI positive-rake tooth form for less torque and a smoother, faster cut
• 30% extra gullet volume for better material penetration
• Cuts stainless steel, mild steel sheet and tube, and materials up to 13mm (1/2in) thick
• Suits standard arbors (A1, A4, A1-1 SDS-Plus, A6/A6-2 Kwik-Change); pilot drill A014C

Specifications

The Starrett Fast Cut (FCH) constant-pitch bi-metal hole saw combines a new tooth material with extra cobalt for enhanced heat and wear resistance and an improved tooth design, delivering a smoother, faster cut across a wide range of materials. It is especially effective on stainless and mild steel sheet and can cut tube with a wall thickness up to 3mm (1/8in).

Key features

• New tooth material with extra cobalt for enhanced heat and wear resistance
• 5.5 TPI positive-rake tooth form for less torque and a smoother, faster cut
• 30% extra gullet volume for better material penetration
• Cuts stainless steel, mild steel sheet and tube, and materials up to 13mm (1/2in) thick
• Suits standard arbors (A1, A4, A1-1 SDS-Plus, A6/A6-2 Kwik-Change); pilot drill A014C

Specifications

The Starrett Fast Cut (FCH) constant-pitch bi-metal hole saw combines a new tooth material with extra cobalt for enhanced heat and wear resistance and an improved tooth design, delivering a smoother, faster cut across a wide range of materials. It is especially effective on stainless and mild steel sheet and can cut tube with a wall thickness up to 3mm (1/8in).

Key features

• New tooth material with extra cobalt for enhanced heat and wear resistance
• 5.5 TPI positive-rake tooth form for less torque and a smoother, faster cut
• 30% extra gullet volume for better material penetration
• Cuts stainless steel, mild steel sheet and tube, and materials up to 13mm (1/2in) thick
• Suits standard arbors (A1, A4, A1-1 SDS-Plus, A6/A6-2 Kwik-Change); pilot drill A014C

Specifications

The Starrett Fast Cut (FCH) constant-pitch bi-metal hole saw combines a new tooth material with extra cobalt for enhanced heat and wear resistance and an improved tooth design, delivering a smoother, faster cut across a wide range of materials. It is especially effective on stainless and mild steel sheet and can cut tube with a wall thickness up to 3mm (1/8in).

Key features

• New tooth material with extra cobalt for enhanced heat and wear resistance
• 5.5 TPI positive-rake tooth form for less torque and a smoother, faster cut
• 30% extra gullet volume for better material penetration
• Cuts stainless steel, mild steel sheet and tube, and materials up to 13mm (1/2in) thick
• Suits standard arbors (A1, A4, A1-1 SDS-Plus, A6/A6-2 Kwik-Change); pilot drill A014C

Specifications

The Starrett Fast Cut (FCH) constant-pitch bi-metal hole saw combines a new tooth material with extra cobalt for enhanced heat and wear resistance and an improved tooth design, delivering a smoother, faster cut across a wide range of materials. It is especially effective on stainless and mild steel sheet and can cut tube with a wall thickness up to 3mm (1/8in).

Key features

• New tooth material with extra cobalt for enhanced heat and wear resistance
• 5.5 TPI positive-rake tooth form for less torque and a smoother, faster cut
• 30% extra gullet volume for better material penetration
• Cuts stainless steel, mild steel sheet and tube, and materials up to 13mm (1/2in) thick
• Suits standard arbors (A1, A4, A1-1 SDS-Plus, A6/A6-2 Kwik-Change); pilot drill A014C

Specifications

The Starrett Fast Cut (FCH) constant-pitch bi-metal hole saw combines a new tooth material with extra cobalt for enhanced heat and wear resistance and an improved tooth design, delivering a smoother, faster cut across a wide range of materials. It is especially effective on stainless and mild steel sheet and can cut tube with a wall thickness up to 3mm (1/8in).

Key features

• New tooth material with extra cobalt for enhanced heat and wear resistance
• 5.5 TPI positive-rake tooth form for less torque and a smoother, faster cut
• 30% extra gullet volume for better material penetration
• Cuts stainless steel, mild steel sheet and tube, and materials up to 13mm (1/2in) thick
• Suits standard arbors (A1, A4, A1-1 SDS-Plus, A6/A6-2 Kwik-Change); pilot drill A014C

Specifications

The Starrett Fast Cut (FCH) constant-pitch bi-metal hole saw combines a new tooth material with extra cobalt for enhanced heat and wear resistance and an improved tooth design, delivering a smoother, faster cut across a wide range of materials. It is especially effective on stainless and mild steel sheet and can cut tube with a wall thickness up to 3mm (1/8in).

Key features

• New tooth material with extra cobalt for enhanced heat and wear resistance
• 5.5 TPI positive-rake tooth form for less torque and a smoother, faster cut
• 30% extra gullet volume for better material penetration
• Cuts stainless steel, mild steel sheet and tube, and materials up to 13mm (1/2in) thick
• Suits standard arbors (A1, A4, A1-1 SDS-Plus, A6/A6-2 Kwik-Change); pilot drill A014C

Specifications

The Starrett Heavy-Duty 3-ply Tungsten Carbide Tipped Sheet Metal (SM) hole saw is ideal for cutting high alloy and stainless steels, non-ferrous light metals and reinforced fabrics at much faster speeds than a bi-metal hole saw. Recommended for sheet metal up to 3mm thick, it is a solid one-piece construction supplied as a complete assembly with arbor and pilot drill.

Key features

• Split-point drill for faster penetration and self-centring to prevent wandering
• Tungsten carbide tipped teeth for superb tool life and cutting performance
• Solid one-piece construction; complete assembly with arbor and pilot drill
• Fitted with ejector spring for easy core removal
• Safety stop prevents drilling beyond 13mm depth; replacement pilot drills available

Specifications

The Starrett Heavy-Duty 3-ply Tungsten Carbide Tipped Sheet Metal (SM) hole saw is ideal for cutting high alloy and stainless steels, non-ferrous light metals and reinforced fabrics at much faster speeds than a bi-metal hole saw. Recommended for sheet metal up to 3mm thick, it is a solid one-piece construction supplied as a complete assembly with arbor and pilot drill.

Key features

• Split-point drill for faster penetration and self-centring to prevent wandering
• Tungsten carbide tipped teeth for superb tool life and cutting performance
• Solid one-piece construction; complete assembly with arbor and pilot drill
• Fitted with ejector spring for easy core removal
• Safety stop prevents drilling beyond 13mm depth; replacement pilot drills available

Specifications

The Starrett Heavy-Duty 3-ply Tungsten Carbide Tipped Sheet Metal (SM) hole saw is ideal for cutting high alloy and stainless steels, non-ferrous light metals and reinforced fabrics at much faster speeds than a bi-metal hole saw. Recommended for sheet metal up to 3mm thick, it is a solid one-piece construction supplied as a complete assembly with arbor and pilot drill.

Key features

• Split-point drill for faster penetration and self-centring to prevent wandering
• Tungsten carbide tipped teeth for superb tool life and cutting performance
• Solid one-piece construction; complete assembly with arbor and pilot drill
• Fitted with ejector spring for easy core removal
• Safety stop prevents drilling beyond 13mm depth; replacement pilot drills available

Specifications

The Starrett Heavy-Duty 3-ply Tungsten Carbide Tipped Sheet Metal (SM) hole saw is ideal for cutting high alloy and stainless steels, non-ferrous light metals and reinforced fabrics at much faster speeds than a bi-metal hole saw. Recommended for sheet metal up to 3mm thick, it is a solid one-piece construction supplied as a complete assembly with arbor and pilot drill.

Key features

• Split-point drill for faster penetration and self-centring to prevent wandering
• Tungsten carbide tipped teeth for superb tool life and cutting performance
• Solid one-piece construction; complete assembly with arbor and pilot drill
• Fitted with ejector spring for easy core removal
• Safety stop prevents drilling beyond 13mm depth; replacement pilot drills available

Specifications

The Starrett Heavy-Duty 3-ply Tungsten Carbide Tipped Sheet Metal (SM) hole saw is ideal for cutting high alloy and stainless steels, non-ferrous light metals and reinforced fabrics at much faster speeds than a bi-metal hole saw. Recommended for sheet metal up to 3mm thick, it is a solid one-piece construction supplied as a complete assembly with arbor and pilot drill.

Key features

• Split-point drill for faster penetration and self-centring to prevent wandering
• Tungsten carbide tipped teeth for superb tool life and cutting performance
• Solid one-piece construction; complete assembly with arbor and pilot drill
• Fitted with ejector spring for easy core removal
• Safety stop prevents drilling beyond 13mm depth; replacement pilot drills available

Specifications

Starrett arbors and accessories are engineered to hold and drive Starrett hole saws accurately and safely. Pilot drills keep the saw centred and prevent wandering, while arbors and extensions provide the right shank and reach for the job. Suitable for use with hole saws from 14mm (9/16in) to 210mm (8-9/32in) diameter.

Key features

• Genuine Starrett fit for secure, accurate hole-saw mounting
• Precision-ground pilot drill for clean centring and reduced wander
• Hardened components for long service life
• Matched to the recommended Starrett hole-saw ranges

Specifications

Starrett arbors and accessories are engineered to hold and drive Starrett hole saws accurately and safely. Pilot drills keep the saw centred and prevent wandering, while arbors and extensions provide the right shank and reach for the job. Suitable for use with hole saws from 14mm (9/16in) to 210mm (8-9/32in) diameter.

Key features

• Genuine Starrett fit for secure, accurate hole-saw mounting
• Precision-ground pilot drill for clean centring and reduced wander
• Hardened components for long service life
• Matched to the recommended Starrett hole-saw ranges

Specifications

The Starrett TCT Multi-Purpose (MPH) hole saw features a unique tooth set for ultra-aggressive, high-performance cutting of non-metallics. It powers through wood, MDF, plastics, plasterboard and ceramic wall tiles up to five times faster than a bi-metal hole saw, with rapid, low-heat stock removal.

Key features

• Powers through wood, MDF, plastics, plasterboard and ceramic wall tiles up to 5x faster than bi-metal
• Tungsten carbide tipped teeth for performance and durability
• Deep gullet for easy core removal and smooth, low-heat cutting
• Suitable for mains and battery-operated tools
• Extended-length pilot-drill arbors available; A014CE longer pilot drill fits standard arbors

Specifications

The Starrett TCT Multi-Purpose (MPH) hole saw features a unique tooth set for ultra-aggressive, high-performance cutting of non-metallics. It powers through wood, MDF, plastics, plasterboard and ceramic wall tiles up to five times faster than a bi-metal hole saw, with rapid, low-heat stock removal.

Key features

• Powers through wood, MDF, plastics, plasterboard and ceramic wall tiles up to 5x faster than bi-metal
• Tungsten carbide tipped teeth for performance and durability
• Deep gullet for easy core removal and smooth, low-heat cutting
• Suitable for mains and battery-operated tools
• Extended-length pilot-drill arbors available; A014CE longer pilot drill fits standard arbors

Specifications

The Starrett TCT Multi-Purpose (MPH) hole saw features a unique tooth set for ultra-aggressive, high-performance cutting of non-metallics. It powers through wood, MDF, plastics, plasterboard and ceramic wall tiles up to five times faster than a bi-metal hole saw, with rapid, low-heat stock removal.

Key features

• Powers through wood, MDF, plastics, plasterboard and ceramic wall tiles up to 5x faster than bi-metal
• Tungsten carbide tipped teeth for performance and durability
• Deep gullet for easy core removal and smooth, low-heat cutting
• Suitable for mains and battery-operated tools
• Extended-length pilot-drill arbors available; A014CE longer pilot drill fits standard arbors

Specifications

The Starrett TCT Multi-Purpose (MPH) hole saw features a unique tooth set for ultra-aggressive, high-performance cutting of non-metallics. It powers through wood, MDF, plastics, plasterboard and ceramic wall tiles up to five times faster than a bi-metal hole saw, with rapid, low-heat stock removal.

Key features

• Powers through wood, MDF, plastics, plasterboard and ceramic wall tiles up to 5x faster than bi-metal
• Tungsten carbide tipped teeth for performance and durability
• Deep gullet for easy core removal and smooth, low-heat cutting
• Suitable for mains and battery-operated tools
• Extended-length pilot-drill arbors available; A014CE longer pilot drill fits standard arbors

Specifications