Paslode Nailer Kits

The Paslode Impulse PPN-Master is a cordless positive placement nailer developed in Australia to quickly and efficiently install metal connectors in line with industry standards. Its exposed-tip, contoured design reduces the fatigue and injuries associated with hand hammering. Supplied as a kit with a 7.4V battery, 240V charger, safety glasses and a hard case.

Features

• Contoured body for line-of-sight nail placement
• Exposed tip locates into metal connector guide holes
• Enhanced nail control for consistent drive depth
• Bypass follower for effortless nail loading
• Suits joist hangers, triple grips, multigrips and strap bracing

Specifications

The Paslode FrameMaster NightWolf is a cordless Impulse framing nailer for 50–90mm nails. Updated engine lubrication and a new fuel mix help it hold drive quality for longer, with a lighter, better-balanced body for all-day framing.

Features

• 3-year Paslode warranty
• Longer service interval so more time is spent nailing, not in the workshop
• Updated engine lubrication and fuel mix to hold drive quality for longer
• Lighter, better-balanced body for all-day use
• Electronic fuel dosing for more reliable firing in hot and cold conditions, with fewer blank fires on cold starts
• On-tool battery and fuel level indicators
• Up to 1,500 shots per fuel cell
• NightWolf nails and fuel are priced to keep running costs down
• Suited to framing, roofing, decking, cladding, flooring, eaves, trusses/rafters, joints and formwork
• Kit: 2 × 7.4V Li-ion batteries, charger kit, safety glasses and 1 Allen key

Specifications

The updated Paslode CoilMaster is a cordless Impulse coil nailer with smoother feed, fewer jams and easier handling on site. It drives 27–50mm coil nails without a hose or compressor, and a Li-ion charge is rated at about 4,500 shots.

Features

• Revised feed-piston lubrication for more reliable nail feed
• Updated lockout parts to lower the chance of jams
• Clearer access if a nail jam does occur
• Cordless Impulse operation — no compressor or hose
• About 4,500 shots per Li-ion charge
• 27–50mm coil nails for cladding, fibre cement, plywood, ply bracing, eaves and soffits, fencing, unpunched metal connectors, strap bracing, decking and cement-tile underlay
• Kit: CoilMaster nailer, 2 Li-ion batteries, charger kit, safety glasses and 2 Allen keys

Specifications

The Paslode Impulse Straight TrimMaster is a compact cordless bradder that runs 16G C brads, 15G steel-frame brads and 14G ND brads by swapping the nose plate. It is built for trim and fibre-cement work without a hose or compressor.

Features

• Swap-n-lock nose plate to change between 16G (C) and 14G (ND)
• Also drives 15G steel-frame brads
• Driver blade and firing pin set up for fibre-cement cladding
• Revised battery position and thumbwheel depth-of-drive
• Updated engine and internal parts for longer service life
• New body and rubber grip with lower vibration
• Kit: TrimMaster 14/16G straight nailer, 2 × 7.4V Li-ion batteries, charger kit, safety glasses and 1 Allen key

Specifications

Paslode Impulse FrameMaster-Li PowerVent cordless gas framing nailer kit. This 7.4V lithium-ion battery nailer drives 50-90mm framing nails from 2.8-3.15mm diameter and is supplied as a kit with two batteries, charger, tools and case.

Features

• Cordless 7.4V lithium-ion gas framing nailer
• Drives 50-90mm nails, 2.8-3.15mm diameter
• Up to 6,000 nails per charge
• 2-minute quick charge drives up to 200 nails
• Includes two 2.2Ah batteries, charger, allen key, safety glasses and case

Specifications

Paslode Impulse TrimMaster 16 gauge Angled Bradder kit, a cordless gas nail gun for driving 16 gauge angled brads. Powered by 7.4V lithium-ion batteries and a fuel cell for cord-free and hose-free finishing and trim work.

Features

• Drives 16 gauge angled brads
• Cordless gas impulse operation
• 2 x 7.4V lithium-ion batteries
• Angled magazine for access to tight corners
• Supplied as a kit

Specifications