A Class 125x1.0 Cutting Disc delivers fast, clean, and precise cutting performance on metal, steel, and other hard materials, making it ideal for demanding workshop, fabrication, and on-site applications.

Key Features

• Application suitability – Optimized for cutting metal, steel, and other hard materials with minimal burr and heat-affected zones.
• Design – Ultra-thin 1.0 mm profile for rapid, low-resistance cuts and reduced material waste.
• Material quality – Manufactured from high-grade abrasive grains and reinforced with quality fiberglass mesh for consistent performance.
• Durability – Engineered for long service life, resisting wear and edge breakage even under intensive use.
• Installation – Standard 125 mm diameter with compatible bore size for quick, secure mounting on most angle grinders.
• Maintenance – Low-maintenance design requiring only regular visual checks for wear, cracks, or damage before use.
• Versatility – Suitable for professional workshops, construction sites, and DIY projects across a wide range of cutting tasks.

[additional]

SMT 624 Supra - abrasive mop disc for stainless steel and steel

Surface processing on stainless steel and steel necessitates abrasive discs that are guaranteed to deliver a high removal rate and an aggressive stock removal rate. The flap disc SMT 624 Supra fits these requirements. It comes in various sizes, with different holes, and a wide range of grit sizes. Therefore, it is suitable for all conventional angle grinders as well as for numerous applications.

Supra abrasive mop discs for high levels of performance The abrasive mop discs included in the “Supra” offer the perfect combination of high removal rates and exceptional service life. This unique blend makes them equally attractive for professional applications and use by hobby and home users with high standards. The unrivalled performance of the flap disc SMT 624 Supra is ensured by its robust and powerful zirconia alumina. The material is self-sharpening as it keeps forming new sharp edges throughout the grinding process. Composed of a sturdy glass fibre backing plate, it satisfies the most stringent safety standards thanks to its extreme strength. The permissible speed ranges up to 15,300 revolutions per minute - depending on the diameter of the disc.

Convex shape for special tasks The flap disc SMT 624 Supra boasts a 12° convex angle. It is the perfect fit for anyone in need of a high removal rate on edges, weld seams and other small surfaces. Another area where it shows its exceptional abilities is chamfering. Since the fan-shaped arrangement of the flaps produces a uniform scratch pattern, the user will be spared the chore of reworking the workpieces even if working with coarser grits.

Abrasive mop disc SMT 624 offers a host of positive attributes Doing away with the need for frequent tool changes, the positive characteristics of the flap disc SMT 624 Supra make a major contribution to efficient work results. What is more, the durable backing plate of this flap disc also improves safety thanks to its low-vibration and minimal noise generation.

Specifications

• Class: Supra
• Grain: Zirconia alumina
• Backing plate: Glass fibre
• Design: Convex 12°
• Materials: Stainless steel, Steel
• Applications: Locksmith's shop, Metal construction, Steel construction

SMT 624 Supra - abrasive mop disc for stainless steel and steel

Surface processing on stainless steel and steel necessitates abrasive discs that are guaranteed to deliver a high removal rate and an aggressive stock removal rate. The flap disc SMT 624 Supra fits these requirements. It comes in various sizes, with different holes, and a wide range of grit sizes. Therefore, it is suitable for all conventional angle grinders as well as for numerous applications.

Supra abrasive mop discs for high levels of performance The abrasive mop discs included in the “Supra” offer the perfect combination of high removal rates and exceptional service life. This unique blend makes them equally attractive for professional applications and use by hobby and home users with high standards. The unrivalled performance of the flap disc SMT 624 Supra is ensured by its robust and powerful zirconia alumina. The material is self-sharpening as it keeps forming new sharp edges throughout the grinding process. Composed of a sturdy glass fibre backing plate, it satisfies the most stringent safety standards thanks to its extreme strength. The permissible speed ranges up to 15,300 revolutions per minute - depending on the diameter of the disc.

Convex shape for special tasks The flap disc SMT 624 Supra boasts a 12° convex angle. It is the perfect fit for anyone in need of a high removal rate on edges, weld seams and other small surfaces. Another area where it shows its exceptional abilities is chamfering. Since the fan-shaped arrangement of the flaps produces a uniform scratch pattern, the user will be spared the chore of reworking the workpieces even if working with coarser grits.

Abrasive mop disc SMT 624 offers a host of positive attributes Doing away with the need for frequent tool changes, the positive characteristics of the flap disc SMT 624 Supra make a major contribution to efficient work results. What is more, the durable backing plate of this flap disc also improves safety thanks to its low-vibration and minimal noise generation.

Specifications

• Class: Supra
• Grain: Zirconia alumina
• Backing plate: Glass fibre
• Design: Convex 12°
• Materials: Stainless steel, Steel
• Applications: Locksmith's shop, Metal construction, Steel construction

SMT 624 Supra - abrasive mop disc for stainless steel and steel

Surface processing on stainless steel and steel necessitates abrasive discs that are guaranteed to deliver a high removal rate and an aggressive stock removal rate. The flap disc SMT 624 Supra fits these requirements. It comes in various sizes, with different holes, and a wide range of grit sizes. Therefore, it is suitable for all conventional angle grinders as well as for numerous applications.

Supra abrasive mop discs for high levels of performance The abrasive mop discs included in the “Supra” offer the perfect combination of high removal rates and exceptional service life. This unique blend makes them equally attractive for professional applications and use by hobby and home users with high standards. The unrivalled performance of the flap disc SMT 624 Supra is ensured by its robust and powerful zirconia alumina. The material is self-sharpening as it keeps forming new sharp edges throughout the grinding process. Composed of a sturdy glass fibre backing plate, it satisfies the most stringent safety standards thanks to its extreme strength. The permissible speed ranges up to 15,300 revolutions per minute - depending on the diameter of the disc.

Convex shape for special tasks The flap disc SMT 624 Supra boasts a 12° convex angle. It is the perfect fit for anyone in need of a high removal rate on edges, weld seams and other small surfaces. Another area where it shows its exceptional abilities is chamfering. Since the fan-shaped arrangement of the flaps produces a uniform scratch pattern, the user will be spared the chore of reworking the workpieces even if working with coarser grits.

Abrasive mop disc SMT 624 offers a host of positive attributes Doing away with the need for frequent tool changes, the positive characteristics of the flap disc SMT 624 Supra make a major contribution to efficient work results. What is more, the durable backing plate of this flap disc also improves safety thanks to its low-vibration and minimal noise generation.

Specifications

• Class: Supra
• Grain: Zirconia alumina
• Backing plate: Glass fibre
• Design: Convex 12°
• Materials: Stainless steel, Steel
• Applications: Locksmith's shop, Metal construction, Steel construction

SMT 624 Supra - abrasive mop disc for stainless steel and steel

Surface processing on stainless steel and steel necessitates abrasive discs that are guaranteed to deliver a high removal rate and an aggressive stock removal rate. The flap disc SMT 624 Supra fits these requirements. It comes in various sizes, with different holes, and a wide range of grit sizes. Therefore, it is suitable for all conventional angle grinders as well as for numerous applications.

Supra abrasive mop discs for high levels of performance The abrasive mop discs included in the “Supra” offer the perfect combination of high removal rates and exceptional service life. This unique blend makes them equally attractive for professional applications and use by hobby and home users with high standards. The unrivalled performance of the flap disc SMT 624 Supra is ensured by its robust and powerful zirconia alumina. The material is self-sharpening as it keeps forming new sharp edges throughout the grinding process. Composed of a sturdy glass fibre backing plate, it satisfies the most stringent safety standards thanks to its extreme strength. The permissible speed ranges up to 15,300 revolutions per minute - depending on the diameter of the disc.

Convex shape for special tasks The flap disc SMT 624 Supra boasts a 12° convex angle. It is the perfect fit for anyone in need of a high removal rate on edges, weld seams and other small surfaces. Another area where it shows its exceptional abilities is chamfering. Since the fan-shaped arrangement of the flaps produces a uniform scratch pattern, the user will be spared the chore of reworking the workpieces even if working with coarser grits.

Abrasive mop disc SMT 624 offers a host of positive attributes Doing away with the need for frequent tool changes, the positive characteristics of the flap disc SMT 624 Supra make a major contribution to efficient work results. What is more, the durable backing plate of this flap disc also improves safety thanks to its low-vibration and minimal noise generation.

Specifications

• Class: Supra
• Grain: Zirconia alumina
• Backing plate: Glass fibre
• Design: Convex 12°
• Materials: Stainless steel, Steel
• Applications: Locksmith's shop, Metal construction, Steel construction

SMT 624 Supra - abrasive mop disc for stainless steel and steel

Surface processing on stainless steel and steel necessitates abrasive discs that are guaranteed to deliver a high removal rate and an aggressive stock removal rate. The flap disc SMT 624 Supra fits these requirements. It comes in various sizes, with different holes, and a wide range of grit sizes. Therefore, it is suitable for all conventional angle grinders as well as for numerous applications.

Supra abrasive mop discs for high levels of performance The abrasive mop discs included in the “Supra” offer the perfect combination of high removal rates and exceptional service life. This unique blend makes them equally attractive for professional applications and use by hobby and home users with high standards. The unrivalled performance of the flap disc SMT 624 Supra is ensured by its robust and powerful zirconia alumina. The material is self-sharpening as it keeps forming new sharp edges throughout the grinding process. Composed of a sturdy glass fibre backing plate, it satisfies the most stringent safety standards thanks to its extreme strength. The permissible speed ranges up to 15,300 revolutions per minute - depending on the diameter of the disc.

Convex shape for special tasks The flap disc SMT 624 Supra boasts a 12° convex angle. It is the perfect fit for anyone in need of a high removal rate on edges, weld seams and other small surfaces. Another area where it shows its exceptional abilities is chamfering. Since the fan-shaped arrangement of the flaps produces a uniform scratch pattern, the user will be spared the chore of reworking the workpieces even if working with coarser grits.

Abrasive mop disc SMT 624 offers a host of positive attributes Doing away with the need for frequent tool changes, the positive characteristics of the flap disc SMT 624 Supra make a major contribution to efficient work results. What is more, the durable backing plate of this flap disc also improves safety thanks to its low-vibration and minimal noise generation.

Specifications

• Class: Supra
• Grain: Zirconia alumina
• Backing plate: Glass fibre
• Design: Convex 12°
• Materials: Stainless steel, Steel
• Applications: Locksmith's shop, Metal construction, Steel construction

SMT 624 Supra - abrasive mop disc for stainless steel and steel

Surface processing on stainless steel and steel necessitates abrasive discs that are guaranteed to deliver a high removal rate and an aggressive stock removal rate. The flap disc SMT 624 Supra fits these requirements. It comes in various sizes, with different holes, and a wide range of grit sizes. Therefore, it is suitable for all conventional angle grinders as well as for numerous applications.

Supra abrasive mop discs for high levels of performance The abrasive mop discs included in the “Supra” offer the perfect combination of high removal rates and exceptional service life. This unique blend makes them equally attractive for professional applications and use by hobby and home users with high standards. The unrivalled performance of the flap disc SMT 624 Supra is ensured by its robust and powerful zirconia alumina. The material is self-sharpening as it keeps forming new sharp edges throughout the grinding process. Composed of a sturdy glass fibre backing plate, it satisfies the most stringent safety standards thanks to its extreme strength. The permissible speed ranges up to 15,300 revolutions per minute - depending on the diameter of the disc.

Convex shape for special tasks The flap disc SMT 624 Supra boasts a 12° convex angle. It is the perfect fit for anyone in need of a high removal rate on edges, weld seams and other small surfaces. Another area where it shows its exceptional abilities is chamfering. Since the fan-shaped arrangement of the flaps produces a uniform scratch pattern, the user will be spared the chore of reworking the workpieces even if working with coarser grits.

Abrasive mop disc SMT 624 offers a host of positive attributes Doing away with the need for frequent tool changes, the positive characteristics of the flap disc SMT 624 Supra make a major contribution to efficient work results. What is more, the durable backing plate of this flap disc also improves safety thanks to its low-vibration and minimal noise generation.

Specifications

• Class: Supra
• Grain: Zirconia alumina
• Backing plate: Glass fibre
• Design: Convex 12°
• Materials: Stainless steel, Steel
• Applications: Locksmith's shop, Metal construction, Steel construction

SMT 624 Supra - abrasive mop disc for stainless steel and steel

Surface processing on stainless steel and steel necessitates abrasive discs that are guaranteed to deliver a high removal rate and an aggressive stock removal rate. The flap disc SMT 624 Supra fits these requirements. It comes in various sizes, with different holes, and a wide range of grit sizes. Therefore, it is suitable for all conventional angle grinders as well as for numerous applications.

Supra abrasive mop discs for high levels of performance The abrasive mop discs included in the “Supra” offer the perfect combination of high removal rates and exceptional service life. This unique blend makes them equally attractive for professional applications and use by hobby and home users with high standards. The unrivalled performance of the flap disc SMT 624 Supra is ensured by its robust and powerful zirconia alumina. The material is self-sharpening as it keeps forming new sharp edges throughout the grinding process. Composed of a sturdy glass fibre backing plate, it satisfies the most stringent safety standards thanks to its extreme strength. The permissible speed ranges up to 15,300 revolutions per minute - depending on the diameter of the disc.

Convex shape for special tasks The flap disc SMT 624 Supra boasts a 12° convex angle. It is the perfect fit for anyone in need of a high removal rate on edges, weld seams and other small surfaces. Another area where it shows its exceptional abilities is chamfering. Since the fan-shaped arrangement of the flaps produces a uniform scratch pattern, the user will be spared the chore of reworking the workpieces even if working with coarser grits.

Abrasive mop disc SMT 624 offers a host of positive attributes Doing away with the need for frequent tool changes, the positive characteristics of the flap disc SMT 624 Supra make a major contribution to efficient work results. What is more, the durable backing plate of this flap disc also improves safety thanks to its low-vibration and minimal noise generation.

Specifications

• Class: Supra
• Grain: Zirconia alumina
• Backing plate: Glass fibre
• Design: Convex 12°
• Materials: Stainless steel, Steel
• Applications: Locksmith's shop, Metal construction, Steel construction

SMT 624 Supra - abrasive mop disc for stainless steel and steel

Surface processing on stainless steel and steel necessitates abrasive discs that are guaranteed to deliver a high removal rate and an aggressive stock removal rate. The flap disc SMT 624 Supra fits these requirements. It comes in various sizes, with different holes, and a wide range of grit sizes. Therefore, it is suitable for all conventional angle grinders as well as for numerous applications.

Supra abrasive mop discs for high levels of performance The abrasive mop discs included in the “Supra” offer the perfect combination of high removal rates and exceptional service life. This unique blend makes them equally attractive for professional applications and use by hobby and home users with high standards. The unrivalled performance of the flap disc SMT 624 Supra is ensured by its robust and powerful zirconia alumina. The material is self-sharpening as it keeps forming new sharp edges throughout the grinding process. Composed of a sturdy glass fibre backing plate, it satisfies the most stringent safety standards thanks to its extreme strength. The permissible speed ranges up to 15,300 revolutions per minute - depending on the diameter of the disc.

Convex shape for special tasks The flap disc SMT 624 Supra boasts a 12° convex angle. It is the perfect fit for anyone in need of a high removal rate on edges, weld seams and other small surfaces. Another area where it shows its exceptional abilities is chamfering. Since the fan-shaped arrangement of the flaps produces a uniform scratch pattern, the user will be spared the chore of reworking the workpieces even if working with coarser grits.

Abrasive mop disc SMT 624 offers a host of positive attributes Doing away with the need for frequent tool changes, the positive characteristics of the flap disc SMT 624 Supra make a major contribution to efficient work results. What is more, the durable backing plate of this flap disc also improves safety thanks to its low-vibration and minimal noise generation.

Specifications

• Class: Supra
• Grain: Zirconia alumina
• Backing plate: Glass fibre
• Design: Convex 12°
• Materials: Stainless steel, Steel
• Applications: Locksmith's shop, Metal construction, Steel construction

SMT 624 Supra - abrasive mop disc for stainless steel and steel

Surface processing on stainless steel and steel necessitates abrasive discs that are guaranteed to deliver a high removal rate and an aggressive stock removal rate. The flap disc SMT 624 Supra fits these requirements. It comes in various sizes, with different holes, and a wide range of grit sizes. Therefore, it is suitable for all conventional angle grinders as well as for numerous applications.

Supra abrasive mop discs for high levels of performance The abrasive mop discs included in the “Supra” offer the perfect combination of high removal rates and exceptional service life. This unique blend makes them equally attractive for professional applications and use by hobby and home users with high standards. The unrivalled performance of the flap disc SMT 624 Supra is ensured by its robust and powerful zirconia alumina. The material is self-sharpening as it keeps forming new sharp edges throughout the grinding process. Composed of a sturdy glass fibre backing plate, it satisfies the most stringent safety standards thanks to its extreme strength. The permissible speed ranges up to 15,300 revolutions per minute - depending on the diameter of the disc.

Convex shape for special tasks The flap disc SMT 624 Supra boasts a 12° convex angle. It is the perfect fit for anyone in need of a high removal rate on edges, weld seams and other small surfaces. Another area where it shows its exceptional abilities is chamfering. Since the fan-shaped arrangement of the flaps produces a uniform scratch pattern, the user will be spared the chore of reworking the workpieces even if working with coarser grits.

Abrasive mop disc SMT 624 offers a host of positive attributes Doing away with the need for frequent tool changes, the positive characteristics of the flap disc SMT 624 Supra make a major contribution to efficient work results. What is more, the durable backing plate of this flap disc also improves safety thanks to its low-vibration and minimal noise generation.

Specifications

• Class: Supra
• Grain: Zirconia alumina
• Backing plate: Glass fibre
• Design: Convex 12°
• Materials: Stainless steel, Steel
• Applications: Locksmith's shop, Metal construction, Steel construction

SMT 624 Supra - abrasive mop disc for stainless steel and steel

Surface processing on stainless steel and steel necessitates abrasive discs that are guaranteed to deliver a high removal rate and an aggressive stock removal rate. The flap disc SMT 624 Supra fits these requirements. It comes in various sizes, with different holes, and a wide range of grit sizes. Therefore, it is suitable for all conventional angle grinders as well as for numerous applications.

Supra abrasive mop discs for high levels of performance The abrasive mop discs included in the “Supra” offer the perfect combination of high removal rates and exceptional service life. This unique blend makes them equally attractive for professional applications and use by hobby and home users with high standards. The unrivalled performance of the flap disc SMT 624 Supra is ensured by its robust and powerful zirconia alumina. The material is self-sharpening as it keeps forming new sharp edges throughout the grinding process. Composed of a sturdy glass fibre backing plate, it satisfies the most stringent safety standards thanks to its extreme strength. The permissible speed ranges up to 15,300 revolutions per minute - depending on the diameter of the disc.

Convex shape for special tasks The flap disc SMT 624 Supra boasts a 12° convex angle. It is the perfect fit for anyone in need of a high removal rate on edges, weld seams and other small surfaces. Another area where it shows its exceptional abilities is chamfering. Since the fan-shaped arrangement of the flaps produces a uniform scratch pattern, the user will be spared the chore of reworking the workpieces even if working with coarser grits.

Abrasive mop disc SMT 624 offers a host of positive attributes Doing away with the need for frequent tool changes, the positive characteristics of the flap disc SMT 624 Supra make a major contribution to efficient work results. What is more, the durable backing plate of this flap disc also improves safety thanks to its low-vibration and minimal noise generation.

Specifications

• Class: Supra
• Grain: Zirconia alumina
• Backing plate: Glass fibre
• Design: Convex 12°
• Materials: Stainless steel, Steel
• Applications: Locksmith's shop, Metal construction, Steel construction

SMT 624 Supra - abrasive mop disc for stainless steel and steel

Surface processing on stainless steel and steel necessitates abrasive discs that are guaranteed to deliver a high removal rate and an aggressive stock removal rate. The flap disc SMT 624 Supra fits these requirements. It comes in various sizes, with different holes, and a wide range of grit sizes. Therefore, it is suitable for all conventional angle grinders as well as for numerous applications.

Supra abrasive mop discs for high levels of performance The abrasive mop discs included in the “Supra” offer the perfect combination of high removal rates and exceptional service life. This unique blend makes them equally attractive for professional applications and use by hobby and home users with high standards. The unrivalled performance of the flap disc SMT 624 Supra is ensured by its robust and powerful zirconia alumina. The material is self-sharpening as it keeps forming new sharp edges throughout the grinding process. Composed of a sturdy glass fibre backing plate, it satisfies the most stringent safety standards thanks to its extreme strength. The permissible speed ranges up to 15,300 revolutions per minute - depending on the diameter of the disc.

Convex shape for special tasks The flap disc SMT 624 Supra boasts a 12° convex angle. It is the perfect fit for anyone in need of a high removal rate on edges, weld seams and other small surfaces. Another area where it shows its exceptional abilities is chamfering. Since the fan-shaped arrangement of the flaps produces a uniform scratch pattern, the user will be spared the chore of reworking the workpieces even if working with coarser grits.

Abrasive mop disc SMT 624 offers a host of positive attributes Doing away with the need for frequent tool changes, the positive characteristics of the flap disc SMT 624 Supra make a major contribution to efficient work results. What is more, the durable backing plate of this flap disc also improves safety thanks to its low-vibration and minimal noise generation.

Specifications

• Class: Supra
• Grain: Zirconia alumina
• Backing plate: Glass fibre
• Design: Convex 12°
• Materials: Stainless steel, Steel
• Applications: Locksmith's shop, Metal construction, Steel construction

SMT 624 Supra - abrasive mop disc for stainless steel and steel

Surface processing on stainless steel and steel necessitates abrasive discs that are guaranteed to deliver a high removal rate and an aggressive stock removal rate. The flap disc SMT 624 Supra fits these requirements. It comes in various sizes, with different holes, and a wide range of grit sizes. Therefore, it is suitable for all conventional angle grinders as well as for numerous applications.

Supra abrasive mop discs for high levels of performance The abrasive mop discs included in the “Supra” offer the perfect combination of high removal rates and exceptional service life. This unique blend makes them equally attractive for professional applications and use by hobby and home users with high standards. The unrivalled performance of the flap disc SMT 624 Supra is ensured by its robust and powerful zirconia alumina. The material is self-sharpening as it keeps forming new sharp edges throughout the grinding process. Composed of a sturdy glass fibre backing plate, it satisfies the most stringent safety standards thanks to its extreme strength. The permissible speed ranges up to 15,300 revolutions per minute - depending on the diameter of the disc.

Convex shape for special tasks The flap disc SMT 624 Supra boasts a 12° convex angle. It is the perfect fit for anyone in need of a high removal rate on edges, weld seams and other small surfaces. Another area where it shows its exceptional abilities is chamfering. Since the fan-shaped arrangement of the flaps produces a uniform scratch pattern, the user will be spared the chore of reworking the workpieces even if working with coarser grits.

Abrasive mop disc SMT 624 offers a host of positive attributes Doing away with the need for frequent tool changes, the positive characteristics of the flap disc SMT 624 Supra make a major contribution to efficient work results. What is more, the durable backing plate of this flap disc also improves safety thanks to its low-vibration and minimal noise generation.

Specifications

• Class: Supra
• Grain: Zirconia alumina
• Backing plate: Glass fibre
• Design: Convex 12°
• Materials: Stainless steel, Steel
• Applications: Locksmith's shop, Metal construction, Steel construction

Optimised for many fields of application – the A 24 R Supra Kronenflex cutting-off wheels

The Kronenflex cutting-off wheel A 24 R Supra offers optimised properties for a wide variety of steel processing applications that stem from its structure and grain composition. Its wide-ranging application options include work on such materials as steel, stainless steel and cast iron.

Wide choice of dimensions for all angle grinders

Offered in the Supra performance class, Klingspor also lets customers choose between different sizes. The A 24 R Supra is furthermore offered with different shapes: flat and with a depressed centre. This allows the wheel to fit on all standard angle grinders.

Supra performance class for the perfect cut

The Kronenflex cutting-off wheels grouped in the Supra performance class are suitable for a plethora of applications thanks to their versatility. They are distinguished by extra long service life and powerful cutting performance. Unlike natural abrasive grain, the synthetically made grain Klingspor uses for their abrasives ensures that the abrasive will retain their removal rate over time.

Long years of experience guarantee quality and safety

Klingspor is the embodiment of a company that can guarantee high safety standards thanks to their long years of experience. The Kronenflex cutting-off wheels have been tested according to oSa guidelines and comply with European safety standard EN 12413. The symbiosis formed by synthetic grain, a variety of liquid and dry resins and the glass fibre mesh integrated to reinforce the cutting-off wheel guarantees a first-rate tool.

Specifications

• Class: Supra
• Bonding agent: Synthetic resin, fibre-reinforced
• Grain: Aluminium oxide
• Materials: Steel, Stainless steel, Castings
• Applications: Apparatus and container manufacturing, Locksmith's shop, Metal construction, Plant engineering

Optimised for many fields of application – the A 24 R Supra Kronenflex cutting-off wheels

The Kronenflex cutting-off wheel A 24 R Supra offers optimised properties for a wide variety of steel processing applications that stem from its structure and grain composition. Its wide-ranging application options include work on such materials as steel, stainless steel and cast iron.

Wide choice of dimensions for all angle grinders

Offered in the Supra performance class, Klingspor also lets customers choose between different sizes. The A 24 R Supra is furthermore offered with different shapes: flat and with a depressed centre. This allows the wheel to fit on all standard angle grinders.

Supra performance class for the perfect cut

The Kronenflex cutting-off wheels grouped in the Supra performance class are suitable for a plethora of applications thanks to their versatility. They are distinguished by extra long service life and powerful cutting performance. Unlike natural abrasive grain, the synthetically made grain Klingspor uses for their abrasives ensures that the abrasive will retain their removal rate over time.

Long years of experience guarantee quality and safety

Klingspor is the embodiment of a company that can guarantee high safety standards thanks to their long years of experience. The Kronenflex cutting-off wheels have been tested according to oSa guidelines and comply with European safety standard EN 12413. The symbiosis formed by synthetic grain, a variety of liquid and dry resins and the glass fibre mesh integrated to reinforce the cutting-off wheel guarantees a first-rate tool.

Specifications

• Class: Supra
• Bonding agent: Synthetic resin, fibre-reinforced
• Grain: Aluminium oxide
• Materials: Steel, Stainless steel, Castings
• Applications: Apparatus and container manufacturing, Locksmith's shop, Metal construction, Plant engineering

Optimised for many fields of application – the A 24 R Supra Kronenflex cutting-off wheels

The Kronenflex cutting-off wheel A 24 R Supra offers optimised properties for a wide variety of steel processing applications that stem from its structure and grain composition. Its wide-ranging application options include work on such materials as steel, stainless steel and cast iron.

Wide choice of dimensions for all angle grinders

Offered in the Supra performance class, Klingspor also lets customers choose between different sizes. The A 24 R Supra is furthermore offered with different shapes: flat and with a depressed centre. This allows the wheel to fit on all standard angle grinders.

Supra performance class for the perfect cut

The Kronenflex cutting-off wheels grouped in the Supra performance class are suitable for a plethora of applications thanks to their versatility. They are distinguished by extra long service life and powerful cutting performance. Unlike natural abrasive grain, the synthetically made grain Klingspor uses for their abrasives ensures that the abrasive will retain their removal rate over time.

Long years of experience guarantee quality and safety

Klingspor is the embodiment of a company that can guarantee high safety standards thanks to their long years of experience. The Kronenflex cutting-off wheels have been tested according to oSa guidelines and comply with European safety standard EN 12413. The symbiosis formed by synthetic grain, a variety of liquid and dry resins and the glass fibre mesh integrated to reinforce the cutting-off wheel guarantees a first-rate tool.

Specifications

• Class: Supra
• Bonding agent: Synthetic resin, fibre-reinforced
• Grain: Aluminium oxide
• Materials: Steel, Stainless steel, Castings
• Applications: Apparatus and container manufacturing, Locksmith's shop, Metal construction, Plant engineering

Optimised for many fields of application – the A 24 R Supra Kronenflex cutting-off wheels

The Kronenflex cutting-off wheel A 24 R Supra offers optimised properties for a wide variety of steel processing applications that stem from its structure and grain composition. Its wide-ranging application options include work on such materials as steel, stainless steel and cast iron.

Wide choice of dimensions for all angle grinders

Offered in the Supra performance class, Klingspor also lets customers choose between different sizes. The A 24 R Supra is furthermore offered with different shapes: flat and with a depressed centre. This allows the wheel to fit on all standard angle grinders.

Supra performance class for the perfect cut

The Kronenflex cutting-off wheels grouped in the Supra performance class are suitable for a plethora of applications thanks to their versatility. They are distinguished by extra long service life and powerful cutting performance. Unlike natural abrasive grain, the synthetically made grain Klingspor uses for their abrasives ensures that the abrasive will retain their removal rate over time.

Long years of experience guarantee quality and safety

Klingspor is the embodiment of a company that can guarantee high safety standards thanks to their long years of experience. The Kronenflex cutting-off wheels have been tested according to oSa guidelines and comply with European safety standard EN 12413. The symbiosis formed by synthetic grain, a variety of liquid and dry resins and the glass fibre mesh integrated to reinforce the cutting-off wheel guarantees a first-rate tool.

Specifications

• Class: Supra
• Bonding agent: Synthetic resin, fibre-reinforced
• Grain: Aluminium oxide
• Materials: Steel, Stainless steel, Castings
• Applications: Apparatus and container manufacturing, Locksmith's shop, Metal construction, Plant engineering

Kronenflex grinding disc A 24 R Supra for work on steel

The Kronenflex grinding disc A 24 R Supra is the right choice for grinding surfaces made of steel, stainless steel and castings. This grinding disc is characterised by aggressive abrasive performance, a long service life and appropriate hardness. When paired with handheld grinders such as high-speed angle grinders, grinding discs must, first and foremost, offer the necessary stability. The surface grit of the A 24 R Supra is made up of an optimised blend of materials that is best suited for processing steel.

Kronenflex grinding discs for efficient work performance

Work efficiency plays a key role in trade and industry. The use of premium abrasive materials such as the A 24 R Supra allows the user to produce flawless work results in the shortest possible processing time. The long service life can be attributed to the even wear of the grit. Every Kronenflex grinding disc will keep reaching its maximum stock removal capacity throughout its useful life. The A 24 R Supra thereby eliminates the need for frequent tool changes.

Diverse applications in steel applications

The wide range of applications for the Kronenflex grinding disc A 24 R Supra extends from surface grinding to edge bevelling to the deburring of edges. When paired an angle grinder, these grinding discs can be used for a multitude of different applications.

Kronenflex grinding discs for maximum safety at work

The safety of abrasive tools is just as important as their efficiency - especially when they are used for grinding. All grinding discs made by Klingspor are tested in accordance with oSa guidelines and bear the oSa safety seal. The oSa is the Organisation for the Safety of Abrasives. Their guidelines impose strict requirements on safety at work and the break resistance of the abrasives. The Kronenflex grinding discs engineered by Klingspor are also guaranteed to comply with European safety standard EN 12413. To ensure safety at work, it is essential to observe the permissible speeds of the grinding discs.

Specifications

• Class: Supra
• Bonding agent: Synthetic resin, fibre-reinforced
• Grain: Aluminium oxide
• Materials: Steel, Stainless steel, Castings
• Applications: Apparatus and container manufacturing, Locksmith's shop, Metal construction, Plant engineering

Kronenflex cutting-off wheel A 46 TZ Special for stainless steel

The Kronenflex cutting-off wheel A 46 TZ Special has been designed especially for demanding tasks and cuts such materials as steel and stainless steel. One of the key benefits of this product is its long service life. This cutting-off wheel is intended for professional applications that rely on high aggressiveness and long life time. The product is free of iron, sulphur and chlorine. The A 46 TZ Special is available with a flat and a convex shape as well as in a variety of diameters to ensure compatibility with different angle grinders.

Special cutting-off wheel for challenging jobs

There are few better options than the cutting-off wheel A 46 TZ when it comes to mastering challenging tasks on stainless steel. As a member of the Special quality class, this wheel is a high-performance product for special applications that offers excellent cutting performance thanks to its synthetically made abrasive grain. Synthetic grains show only minimum wear and are guaranteed to produce uniform results. These are qualities that are appreciated by professional users and craftsmen alike. Klingspor also relies on only the finest raw materials for the resins and filler materials used in their products. This focus on quality ensures that the user will always produce the best possible results in day-to-day use.

Ultimate performance, proven safety

Aside from focusing on excellent performance, Klingspor also attaches prime importance to safe operation. Just like all other cutting-off wheels included in the product selection, the cutting-off wheel A 46 TZ Special has been rigorously tested in accordance with oSa guidelines. The product furthermore meets all safety requirements set out in safety standard EN 12413. Proper handling is the foremost requirement for ensuring a maximum level of safety. The user should operate the wheel at a speed up to the specified maximum. Other requirements are to subject the cutting-off wheels to radial loads only and to choose a tool pressure that is appropriate for the material that is being processed.

Specifications

• Class: Special
• Bonding agent: Synthetic resin, fibre-reinforced
• Grain: Aluminium oxide
• Materials: Stainless steel, Steel
• Applications: Apparatus and container manufacturing, Locksmith's shop, Metal construction, Plant engineering, Railing construction, Stainless steel processing industry

Kronenflex cutting-off wheel A 46 TZ Special for stainless steel

The Kronenflex cutting-off wheel A 46 TZ Special has been designed especially for demanding tasks and cuts such materials as steel and stainless steel. One of the key benefits of this product is its long service life. This cutting-off wheel is intended for professional applications that rely on high aggressiveness and long life time. The product is free of iron, sulphur and chlorine. The A 46 TZ Special is available with a flat and a convex shape as well as in a variety of diameters to ensure compatibility with different angle grinders.

Special cutting-off wheel for challenging jobs

There are few better options than the cutting-off wheel A 46 TZ when it comes to mastering challenging tasks on stainless steel. As a member of the Special quality class, this wheel is a high-performance product for special applications that offers excellent cutting performance thanks to its synthetically made abrasive grain. Synthetic grains show only minimum wear and are guaranteed to produce uniform results. These are qualities that are appreciated by professional users and craftsmen alike. Klingspor also relies on only the finest raw materials for the resins and filler materials used in their products. This focus on quality ensures that the user will always produce the best possible results in day-to-day use.

Ultimate performance, proven safety

Aside from focusing on excellent performance, Klingspor also attaches prime importance to safe operation. Just like all other cutting-off wheels included in the product selection, the cutting-off wheel A 46 TZ Special has been rigorously tested in accordance with oSa guidelines. The product furthermore meets all safety requirements set out in safety standard EN 12413. Proper handling is the foremost requirement for ensuring a maximum level of safety. The user should operate the wheel at a speed up to the specified maximum. Other requirements are to subject the cutting-off wheels to radial loads only and to choose a tool pressure that is appropriate for the material that is being processed.

Specifications

• Class: Special
• Bonding agent: Synthetic resin, fibre-reinforced
• Grain: Aluminium oxide
• Materials: Stainless steel, Steel
• Applications: Apparatus and container manufacturing, Locksmith's shop, Metal construction, Plant engineering, Railing construction, Stainless steel processing industry

254mm(10"),for wood 60T,arbor:30mm With 16mm and 25.4mm reduction ring Suitable for mitre saw Packed by color box

"235mm(9-1/4""),for wood
60T,arbor:30mm
With 16mm and 25.4mm reduction ring
Packed by color box"

Brushless motor

• Voltage: 20V
• Bar length: 12"(30cm)
• Chain Speed: 10m/s

• Quick Chain brake function
• Auto lubrication

Include

• 1 Pcs 12" saw chain
• 1 Pcs 12" chain saw bar

• Chain pitch: 3/8"
• Chain drive links: 45
• Gauge: 0.043"

• Battery and charger sold separately
• Recommend to 4.0Ah match battery pack
• Packed by color box

• Voltage: 20V
• No-load speed: 0-2800rpm

Cutting capacity:

• Metal: 12mm
• Wood: 210mm

• With 1pcs metal saw blade
• With 1pcs wood saw blade
• Battery and charger sold separately
• Packed by color box

2 Pcs/set
Size: 185mm(7-1/4")
Teeth quantity: 24T
Arbor: 20mm
Reduction ring: 16mm
Matrix thickness: 1.0mm
Better for Lithium-ion circular saw
Suitable for lithium-ion circular saw ELCS1851
Wood cutting
Packed by double blister

"185mm(7-1/4""), for wood
60T,arbor:20mm
With 16mm reduction ring
Suitable for circular saw
For item ECSW1852, ECSW1853
Packed by color box"

"185mm(7-1/4"") , for wood
40T,arbor:20mm
With 16mm reduction ring
Suitable for circular saw
For item ECSW1851
Packed by color box"

Brand Name: EMTOP
Included Components: 1 Pcs 185mm saw blade
Manufacturer: EMTOP
ASIN: 6941556244194
Power Source: Battery Powered
Power Plug: No Plug

About this item
• Voltage: 20V, Brushless motor
• Blade diameter: 185mm, Arbor size:20mm, No-load speed: 4800rpm
• Cutting capacity: 45° degree: 45mm, 90° degree: 65mm. Adjustable cutting depth. Adjustable bevel cutting
• Include: 1 Pcs circular saw,1 Pcs 185mm blade. Packed by color box. Battery and charger sold separately
• Three-year warranty, so you can buy with confidence

"185mm(7-1/4"") , for wood
24T,arbor:20mm
With 16mm reduction ring
Suitable for circular saw
For item ECSW1851
Packed by color box"

"355mm(14"")X2.5mm(3/32"")X25.4mm(1"")
Flat centre
Cutting disc for metal and  INOX
RPM:4400r/min
Packed by label"

"230MM(9"")X2MM(5/64'')X22.2MM(7/8"")
Flat centre
Cutting disc for metal and inox
RPM:6650r/min
Packed by label"

2 Pcs/set
Size: 165mm(6-1/2")
Teeth quantity: 24T
Arbor: 20mm
Reduction ring: 16mm
Matrix thickness: 1.0mm
Suitable for circular saw ELCS1652
Wood cutting
Packed by double blister

"115mm(4-1/2"")*1.0mm(3/64"")*22.2mm(7/8"")
Flat centre
Cutting disc for metal and inox
RPM:13300r/min
Packed by label"

"125mm(5"")x1.0mm(3/64"")x22.2mm(7/8"")
Flat center
Cutting disc for metal and inox
RPM:12200r/min
Packed by label"

"125MM(5"")X1.2MM(3/64"")X22.2MM(7/8"")
Flat centre
Cutting disc for metal and INOX
Packed by label"

"25pcs/set
Size: 115(4-1/2"")x1.0(3/64"")x22.2mm(7/8"")
Flat centre
Cutting disc for metal and INOX
Better for Lithium-ion angle grinder
RPM:13300r/min
Packed by metal box"

"Size: 115(4-1/2"")x1.0(3/64"")x22.2mm(7/8"")
100pcs/metal box
Flat centre
Cutting disc for metal and inox
RPM:13300r/min
Packed by metal box"

"125(5"")x22.2mm
Blade width: 10mm
Use for cutting bricks, blocks, concrete and stone 
Packed by color box"

"125(5"")x22.2mm
Blade width: 10mm
Use for cutting bricks, blocks, concrete and stone
Packed by color box"

"125(5"")x22.2mm
Blade width: 12mm
Use for cutting pavers, bricks, blocks, concrete and stone 
Packed by double blister"

"125mm X 22.2mm
Blade width:8mm
Metal base thickness:0.8mm
With flange plate
Universal purpose:ceramic,tile,marble,brick
Forbidden to use for Vitrified brick (nano glass)
Packed by double blister"

"115(4-1/2"")x22.2mm
Blade width: 8mm
For wet cutting
Packed by color box"

"115(4-1/2"")X22.2mm
Blade width:10mm
Packed by color box"

"115(4-1/2"")x22.2mm
Blade width: 10mm
Use for cutting bricks, blocks, concrete and stone
Packed by color box"