Fastening Tools

KNIPEX Alligator — 250mm. Made in Germany.

Key Features

• More output and comfort compared to conventional water pump pliers of the same length: 9-notch adjustment positioning for 30 % more gripping capacity.
• Good access to the workpiece due to slim size of head and joint area.
• Self-locking on pipes and nuts: no slipping on the workpiece and low hand force required.
• Gripping surfaces with special hardened teeth, teeth hardness approx. 61 HRC: high wear resistance and stable gripping.
• Box-joint design: high stability due to double guide.
• Robust construction, insensitive to dirt — particularly suitable for outdoor work.
• Guard prevents the operator's fingers being pinched.
• Chrome vanadium electric steel, forged, oil-hardened.

Specifications

KNIPEX Circlip Plier Set — Tool Roll. Made in Germany.

Key Features

• Tool roll made of hard-wearing polyester fabric.
• With practical, adjustable quick release fastener.
• Four common Circlip Pliers for internal and external circlips.

Specifications

KNIPEX Cobra — 250mm. Made in Germany.

Key Features

• Push the button for adjustment on the workpiece.
• Fine adjustment for optimum adaptation to different sizes of workpieces and a comfortable handle width.
• Self-locking on pipes and nuts: no slipping on the workpiece and low hand force required.
• Gripping surfaces with special hardened teeth, teeth hardness approx. 61 HRC: high wear resistance and stable gripping.
• Box-joint design: high stability due to double guide.
• Reliable catching of the hinge bolt: no unintentional shifting.
• Guard prevents the operator's fingers being pinched.
• Chrome vanadium electric steel, forged, oil-hardened.

Specifications

Video

KNIPEX Cobra® Range

KNIPEX Heavy-duty Power Pack — 3-piece. Made in Germany.

Key Features

• Three-piece pliers set including popular KNIPEX Cobra® (250mm), High Leverage Combination Pliers (200mm) and High Leverage Diagonal Cutters (200mm).
• Essential tools, Long service life.

Specifications

KNIPEX Mixed Plier Set — 4-piece. Made in Germany.

Key Features

• Set of four most popular KNIPEX pliers stored in an EVA foam tray.
• Contains: Combination Pliers 200mm, Long Nose Cutting Pliers 200mm, High Leverage Diagonal Cutter 200mm and KNIPEX Cobra® Water Pump Pliers 250mm.
• For all common tool trolleys and workbenches.

Specifications

TOLEDO Circlip Plier Set — Heavy-duty 4-piece.

Key Features

• Heavy-duty Plier set for internal and external circlips.
• Precision tips for secure circlip retention.
• Anti-slip PVC handles provide a comfortable grip and control.
• Heavy-duty steel with black phosphate finish.
• 4-piece set

Specifications

KNIPEX Cutting and Gripping Set 2-piece — 200mm. Made in Germany.

Key Features

• Two essential pliers for every toolkit.
• Perfect combination for gripping, holding and powerful cutting.
• Includes: 26 12 200 Long Nose Cutting Pliers and 74 02 200 High Leverage Diagonal Cutters.
• 26 12 200 Long Nose Cutting Pliers.
• Slim, pointed jaws for precise gripping in tight spaces.
• Strong, distortion-resistant tips built for accuracy.
• Integrated cutting edges tackle soft to hard wire with ease.
• 74 02 200 High Leverage Diagonal Cutters.
• Maximum cutting power with minimal effort.
• Suited to tough, continuous use.
• Durable cutting edges designed for soft, hard and piano wire.

Specifications

TOLEDO Pick & Hook Set Miniature — 4-piece.

Key Features

• Suitable for automotive, industrial and hardware applications.
• Suited to scraping, scribing, marking, picking and seal removal.
• Heavy-duty reinforced nylon handle.
• Manufactured from heat treated alloy steel.
• 4 piece set

Specifications

BESSEY EZL one-handed clamp. Clamping force up to 1,400 N / 140 kg (EZL). Sold on the Stabila AU invoice under the Stabila brand; manufacturer is BESSEY.

Highlights

• Clamping force up to 1,400 N / 140 kg (EZL)
• Conversion for spreading – tool-free thanks to simple release mechanism at the touch of a button on the top section
• Ergonomically shaped 2-component plastic handle with pump mechanism and integrated release lever behind the rail
• Protective caps with cross prism on the top for securely holding round, pointed and angular parts
• One-handed operation with little effort required

Description

• Clamping force up to: 200 N / 20 kg (EZS11-4), 750 N / 75 kg (EZM), 1,400 N / 140 kg (EZL), 2,700 N / 270 kg (EZXL)
• Conversion for spreading – tool-free with EZM, EZL, EZXL thanks to simple release mechanism at the touch of a button on the top section
• Ergonomically shaped 2-component plastic handle with pump mechanism and integrated release lever behind the rail
• Protective caps with cross prism on the top for securely holding round, pointed and angular parts
• One-handed operation with little effort required
• Multiple applications — The one-handed EZ range offers numerous possible applications:
• due to a diverse range in four sizes with clamping widths from 110 to 900 mm and clamping forces from 200 N to 2,700 N
• due to the cross prism integrated in the plastic protective caps for the secure fastening of round, pointed and angular pieces
• due to conversion of the top section from clamping to spreading – with sizes EZM, EZL and EZXL tool-free thanks to release mechanism at the touch of a button
• Practical convenience — The entire range offers ergonomic handling, thanks to sophisticated technology:
• due to the high quality 2-component plastic handle with pump lever behind the rail for safe access from both directions
• due to the release handle integrated in the grip for quick adjustment of the sliding bar and for releasing the clamp
• Robust design — Modern aesthetics meet with longevity here:
• due to the use of high-quality materials, such as fibreglass-reinforced polyamide for the top and bottom, as well as hardened, tempered, and burnished steel for the profiled rails
• due to the plastic housing, the grip mechanism is protected from dust and chips

Applications

Furniture and joinery works, Carpentry and woodwork: Dry construction; DIY; One-handed clamping and spreading.

Specifications

Video

Versatile one-handed clamping and spreading: One-hand clamps EZ | BESSEY

BESSEY K Body REVO parallel clamp. Clamping force up to 8,000 N Sold on the Stabila AU invoice under the Stabila brand; manufacturer is BESSEY.

Highlights

• Clamping force up to 8,000 N
• Very large parallel clamping surfaces with 3 removable pressure caps
• Metal-reinforced plastic housing and optimised sliding arm with double slide protection for more power and safety: The set clamping force is maintained and the sliding arm cannot unintentionally slip in the unclamped condition
• Can be converted without tools for spreading tasks
• High-quality 2-component symmetrical plastic handle with hexagon socket for the comfortable application of the clamping force (max. torque 17 Nm)

Description

• Clamping force up to 8,000 N
• Very large parallel clamping surfaces with 3 removable pressure caps
• Metal-reinforced plastic housing and optimised sliding arm with double slide protection for more power and safety: The set clamping force is maintained and the sliding arm cannot unintentionally slip in the unclamped condition
• Can be converted without tools for spreading tasks
• High-quality 2-component symmetrical plastic handle with hexagon socket for the comfortable application of the clamping force (max. torque 17 Nm)
• Precise and gentle — Workpieces with sensitive surfaces can be clamped and spread exactly parallel to each other – even behind and on the side of the rail. Corners and recessed edges as well as pointed and round surfaces can also be perfectly aligned:
• due to extremely large clamping surfaces that are attached perpendicular to the rail
• due to three removable pressure caps that are repellent to glue, and also resistant to paint and grease solvents
• due to workpiece supports that prevent the workpiece from coming into contact with the rail
• Powerful and safe — They securely clamp with a clamping force of up to 8,000 N:
• due to the metal-reinforced plastic housing
• due to the optimised sliding arm with double slide protection: It holds the clamp reliably with the set clamping force and prevents any unintentional slipping of the sliding arm in the unclamped condition
• Versatile and well thought out — The clamps provide an enormous number of possible applications:
• due to ingenious accessories, such as tilting adapter, frame press set, clamp extension and table clamp
• the ergonomically formed 2-component symmetrical plastic handle with hexagon socket means the clamping force can be comfortably applied (max. torque 17 Nm)
• the continuously adjustable head for the KREV Vario version enables the clamp to be positioned in the middle of the workpiece for optimum weight distribution

Applications

Cabinet Making, Hardwood Glue-ups: Door and Window Assembly; Woodworking Jigs and Fixtures; Furniture Building; Home Renovation Projects.

Specifications

Video

Large-area clamping and spreading: The evolution of the REVO body clamp | BESSEY

Documents

Brochure K Body REVO KRE (PDF)

BESSEY TG-2K malleable cast-iron screw clamp with 2-component handle. Clamping force up to 6,000 N Sold on the Stabila AU invoice under the Stabila brand; manufacturer is BESSEY.

Highlights

• Clamping force up to 6,000 N
• High‐quality 2‐component plastic handle
• Pressure plates can be replace by hand – no tools required (from 80 mm throat depth)
• With protective caps on the clamping surfaces
• Stable profiled rail with serration
• BESSEY anti‐slip system (from 80 mm throat depth)

Description

• Clamping force up to 6,000 N
• High‐quality 2‐component plastic handle
• Pressure plates can be replace by hand – no tools required (from 80 mm throat depth)
• With protective caps on the clamping surfaces
• Stable profiled rail with serration
• BESSEY anti‐slip system (from 80 mm throat depth)
• Integrated BESSEY anti-slip system — Maximum safety is available with the integrated BESSEY anti-slip system, when clamping with a throat depth of 80 mm or more. A set screw that is molded into the sliding arm interlocks with the serration on the rail. This effectively prevents the clamp from dislodging or slipping away.
• Reinforced malleable iron clamps — Both the upper and lower sections are produced from high-quality malleable iron and reinforced by shafts. The powder coating protects against corrosion and the characteristic shaft profile works as a reliable reinforcement against torsion forces.
• High‐quality profiled rail — The BESSEY profiled rail from our own drawing plant has been especially optimised for clamps. The serration on six faces additionally prevents the clamp from slipping.
• Pressure plate — For enhanced serviceability the pressure plate can be changed with no need for tools. It can be replaced very easily and quickly.

Applications

Furniture and joinery works, Carpentry and woodwork: Kitchen construction and shop fitting; Shell construction; Interior fittings; DIY; Powerful and rigid clamping.

Specifications

Video

Powerful, rigid clamping: Original malleable cast iron screw clamps TG | BESSEY

Documents

Application tips — pressure plate assembly (PDF)

BESSEY TG-2K malleable cast-iron screw clamp with 2-component handle. Clamping force up to 6,000 N Sold on the Stabila AU invoice under the Stabila brand; manufacturer is BESSEY.

Highlights

• Clamping force up to 6,000 N
• High‐quality 2‐component plastic handle
• Pressure plates can be replace by hand – no tools required (from 80 mm throat depth)
• With protective caps on the clamping surfaces
• Stable profiled rail with serration
• BESSEY anti‐slip system (from 80 mm throat depth)

Description

• Clamping force up to 6,000 N
• High‐quality 2‐component plastic handle
• Pressure plates can be replace by hand – no tools required (from 80 mm throat depth)
• With protective caps on the clamping surfaces
• Stable profiled rail with serration
• BESSEY anti‐slip system (from 80 mm throat depth)
• Integrated BESSEY anti-slip system — Maximum safety is available with the integrated BESSEY anti-slip system, when clamping with a throat depth of 80 mm or more. A set screw that is molded into the sliding arm interlocks with the serration on the rail. This effectively prevents the clamp from dislodging or slipping away.
• Reinforced malleable iron clamps — Both the upper and lower sections are produced from high-quality malleable iron and reinforced by shafts. The powder coating protects against corrosion and the characteristic shaft profile works as a reliable reinforcement against torsion forces.
• High‐quality profiled rail — The BESSEY profiled rail from our own drawing plant has been especially optimised for clamps. The serration on six faces additionally prevents the clamp from slipping.
• Pressure plate — For enhanced serviceability the pressure plate can be changed with no need for tools. It can be replaced very easily and quickly.

Applications

Furniture and joinery works, Carpentry and woodwork: Kitchen construction and shop fitting; Shell construction; Interior fittings; DIY; Powerful and rigid clamping.

Specifications

Video

Powerful, rigid clamping: Original malleable cast iron screw clamps TG | BESSEY

Documents

Application tips — pressure plate assembly (PDF)

BESSEY TG-2K malleable cast-iron screw clamp with 2-component handle. Clamping force up to 6,000 N Sold on the Stabila AU invoice under the Stabila brand; manufacturer is BESSEY.

Highlights

• Clamping force up to 6,000 N
• High‐quality 2‐component plastic handle
• Pressure plates can be replace by hand – no tools required (from 80 mm throat depth)
• With protective caps on the clamping surfaces
• Stable profiled rail with serration
• BESSEY anti‐slip system (from 80 mm throat depth)

Description

• Clamping force up to 6,000 N
• High‐quality 2‐component plastic handle
• Pressure plates can be replace by hand – no tools required (from 80 mm throat depth)
• With protective caps on the clamping surfaces
• Stable profiled rail with serration
• BESSEY anti‐slip system (from 80 mm throat depth)
• Integrated BESSEY anti-slip system — Maximum safety is available with the integrated BESSEY anti-slip system, when clamping with a throat depth of 80 mm or more. A set screw that is molded into the sliding arm interlocks with the serration on the rail. This effectively prevents the clamp from dislodging or slipping away.
• Reinforced malleable iron clamps — Both the upper and lower sections are produced from high-quality malleable iron and reinforced by shafts. The powder coating protects against corrosion and the characteristic shaft profile works as a reliable reinforcement against torsion forces.
• High‐quality profiled rail — The BESSEY profiled rail from our own drawing plant has been especially optimised for clamps. The serration on six faces additionally prevents the clamp from slipping.
• Pressure plate — For enhanced serviceability the pressure plate can be changed with no need for tools. It can be replaced very easily and quickly.

Applications

Furniture and joinery works, Carpentry and woodwork: Kitchen construction and shop fitting; Shell construction; Interior fittings; DIY; Powerful and rigid clamping.

Specifications

Video

Powerful, rigid clamping: Original malleable cast iron screw clamps TG | BESSEY

Documents

Application tips — pressure plate assembly (PDF)

BESSEY TG-2K malleable cast-iron screw clamp with 2-component handle. Clamping force up to 6,000 N Sold on the Stabila AU invoice under the Stabila brand; manufacturer is BESSEY.

Highlights

• Clamping force up to 6,000 N
• High‐quality 2‐component plastic handle
• Pressure plates can be replace by hand – no tools required (from 80 mm throat depth)
• With protective caps on the clamping surfaces
• Stable profiled rail with serration
• BESSEY anti‐slip system (from 80 mm throat depth)

Description

• Clamping force up to 6,000 N
• High‐quality 2‐component plastic handle
• Pressure plates can be replace by hand – no tools required (from 80 mm throat depth)
• With protective caps on the clamping surfaces
• Stable profiled rail with serration
• BESSEY anti‐slip system (from 80 mm throat depth)
• Integrated BESSEY anti-slip system — Maximum safety is available with the integrated BESSEY anti-slip system, when clamping with a throat depth of 80 mm or more. A set screw that is molded into the sliding arm interlocks with the serration on the rail. This effectively prevents the clamp from dislodging or slipping away.
• Reinforced malleable iron clamps — Both the upper and lower sections are produced from high-quality malleable iron and reinforced by shafts. The powder coating protects against corrosion and the characteristic shaft profile works as a reliable reinforcement against torsion forces.
• High‐quality profiled rail — The BESSEY profiled rail from our own drawing plant has been especially optimised for clamps. The serration on six faces additionally prevents the clamp from slipping.
• Pressure plate — For enhanced serviceability the pressure plate can be changed with no need for tools. It can be replaced very easily and quickly.

Applications

Furniture and joinery works, Carpentry and woodwork: Kitchen construction and shop fitting; Shell construction; Interior fittings; DIY; Powerful and rigid clamping.

Specifications

Video

Powerful, rigid clamping: Original malleable cast iron screw clamps TG | BESSEY

Documents

Application tips — pressure plate assembly (PDF)

BESSEY EZL one-handed clamp. Clamping force up to 1,400 N / 140 kg (EZL). Sold on the Stabila AU invoice under the Stabila brand; manufacturer is BESSEY.

Highlights

• Clamping force up to 1,400 N / 140 kg (EZL)
• Conversion for spreading – tool-free thanks to simple release mechanism at the touch of a button on the top section
• Ergonomically shaped 2-component plastic handle with pump mechanism and integrated release lever behind the rail
• Protective caps with cross prism on the top for securely holding round, pointed and angular parts
• One-handed operation with little effort required

Description

• Clamping force up to: 200 N / 20 kg (EZS11-4), 750 N / 75 kg (EZM), 1,400 N / 140 kg (EZL), 2,700 N / 270 kg (EZXL)
• Conversion for spreading – tool-free with EZM, EZL, EZXL thanks to simple release mechanism at the touch of a button on the top section
• Ergonomically shaped 2-component plastic handle with pump mechanism and integrated release lever behind the rail
• Protective caps with cross prism on the top for securely holding round, pointed and angular parts
• One-handed operation with little effort required
• Multiple applications — The one-handed EZ range offers numerous possible applications:
• due to a diverse range in four sizes with clamping widths from 110 to 900 mm and clamping forces from 200 N to 2,700 N
• due to the cross prism integrated in the plastic protective caps for the secure fastening of round, pointed and angular pieces
• due to conversion of the top section from clamping to spreading – with sizes EZM, EZL and EZXL tool-free thanks to release mechanism at the touch of a button
• Practical convenience — The entire range offers ergonomic handling, thanks to sophisticated technology:
• due to the high quality 2-component plastic handle with pump lever behind the rail for safe access from both directions
• due to the release handle integrated in the grip for quick adjustment of the sliding bar and for releasing the clamp
• Robust design — Modern aesthetics meet with longevity here:
• due to the use of high-quality materials, such as fibreglass-reinforced polyamide for the top and bottom, as well as hardened, tempered, and burnished steel for the profiled rails
• due to the plastic housing, the grip mechanism is protected from dust and chips

Applications

Furniture and joinery works, Carpentry and woodwork: Dry construction; DIY; One-handed clamping and spreading.

Specifications

Video

Versatile one-handed clamping and spreading: One-hand clamps EZ | BESSEY

BESSEY K Body REVO parallel clamp. Clamping force up to 8,000 N Sold on the Stabila AU invoice under the Stabila brand; manufacturer is BESSEY.

Highlights

• Clamping force up to 8,000 N
• Very large parallel clamping surfaces with 3 removable pressure caps
• Metal-reinforced plastic housing and optimised sliding arm with double slide protection for more power and safety: The set clamping force is maintained and the sliding arm cannot unintentionally slip in the unclamped condition
• Can be converted without tools for spreading tasks
• High-quality 2-component symmetrical plastic handle with hexagon socket for the comfortable application of the clamping force (max. torque 17 Nm)

Description

• Clamping force up to 8,000 N
• Very large parallel clamping surfaces with 3 removable pressure caps
• Metal-reinforced plastic housing and optimised sliding arm with double slide protection for more power and safety: The set clamping force is maintained and the sliding arm cannot unintentionally slip in the unclamped condition
• Can be converted without tools for spreading tasks
• High-quality 2-component symmetrical plastic handle with hexagon socket for the comfortable application of the clamping force (max. torque 17 Nm)
• Precise and gentle — Workpieces with sensitive surfaces can be clamped and spread exactly parallel to each other – even behind and on the side of the rail. Corners and recessed edges as well as pointed and round surfaces can also be perfectly aligned:
• due to extremely large clamping surfaces that are attached perpendicular to the rail
• due to three removable pressure caps that are repellent to glue, and also resistant to paint and grease solvents
• due to workpiece supports that prevent the workpiece from coming into contact with the rail
• Powerful and safe — They securely clamp with a clamping force of up to 8,000 N:
• due to the metal-reinforced plastic housing
• due to the optimised sliding arm with double slide protection: It holds the clamp reliably with the set clamping force and prevents any unintentional slipping of the sliding arm in the unclamped condition
• Versatile and well thought out — The clamps provide an enormous number of possible applications:
• due to ingenious accessories, such as tilting adapter, frame press set, clamp extension and table clamp
• the ergonomically formed 2-component symmetrical plastic handle with hexagon socket means the clamping force can be comfortably applied (max. torque 17 Nm)
• the continuously adjustable head for the KREV Vario version enables the clamp to be positioned in the middle of the workpiece for optimum weight distribution

Applications

Cabinet Making, Hardwood Glue-ups: Door and Window Assembly; Woodworking Jigs and Fixtures; Furniture Building; Home Renovation Projects.

Specifications

Video

Large-area clamping and spreading: The evolution of the REVO body clamp | BESSEY

Documents

Brochure K Body REVO KRE (PDF)

BESSEY K Body REVO parallel clamp. Clamping force up to 8,000 N Sold on the Stabila AU invoice under the Stabila brand; manufacturer is BESSEY.

Highlights

• Clamping force up to 8,000 N
• Very large parallel clamping surfaces with 3 removable pressure caps
• Metal-reinforced plastic housing and optimised sliding arm with double slide protection for more power and safety: The set clamping force is maintained and the sliding arm cannot unintentionally slip in the unclamped condition
• Can be converted without tools for spreading tasks
• High-quality 2-component symmetrical plastic handle with hexagon socket for the comfortable application of the clamping force (max. torque 17 Nm)

Description

• Clamping force up to 8,000 N
• Very large parallel clamping surfaces with 3 removable pressure caps
• Metal-reinforced plastic housing and optimised sliding arm with double slide protection for more power and safety: The set clamping force is maintained and the sliding arm cannot unintentionally slip in the unclamped condition
• Can be converted without tools for spreading tasks
• High-quality 2-component symmetrical plastic handle with hexagon socket for the comfortable application of the clamping force (max. torque 17 Nm)
• Precise and gentle — Workpieces with sensitive surfaces can be clamped and spread exactly parallel to each other – even behind and on the side of the rail. Corners and recessed edges as well as pointed and round surfaces can also be perfectly aligned:
• due to extremely large clamping surfaces that are attached perpendicular to the rail
• due to three removable pressure caps that are repellent to glue, and also resistant to paint and grease solvents
• due to workpiece supports that prevent the workpiece from coming into contact with the rail
• Powerful and safe — They securely clamp with a clamping force of up to 8,000 N:
• due to the metal-reinforced plastic housing
• due to the optimised sliding arm with double slide protection: It holds the clamp reliably with the set clamping force and prevents any unintentional slipping of the sliding arm in the unclamped condition
• Versatile and well thought out — The clamps provide an enormous number of possible applications:
• due to ingenious accessories, such as tilting adapter, frame press set, clamp extension and table clamp
• the ergonomically formed 2-component symmetrical plastic handle with hexagon socket means the clamping force can be comfortably applied (max. torque 17 Nm)
• the continuously adjustable head for the KREV Vario version enables the clamp to be positioned in the middle of the workpiece for optimum weight distribution

Applications

Cabinet Making, Hardwood Glue-ups: Door and Window Assembly; Woodworking Jigs and Fixtures; Furniture Building; Home Renovation Projects.

Specifications

Video

Large-area clamping and spreading: The evolution of the REVO body clamp | BESSEY

Documents

Brochure K Body REVO KRE (PDF)

Brand Name: EMTOP
Included Components: Cordless caulking gun
Manufacturer: EMTOP
Unit Count: 1
ASIN: 6941556237950
Power Source: Battery Powered
Power Plug: No Plug

About this item
• Voltage: 20V, Thrust: 3700N
• Trigger: variable speed, Gluing speed: 0.5-4.4mm/s
• Cartridge size: 25.4cm(10''), No load current: 0.35A
• Include: 1 Pcs caulking gun. Packed by color box. Battery and charger sold separately
• Three-year warranty, so you can buy with confidence

"Size:8""
Applicable to stainless steel,aluminum and steel rivet
Stainless steel rivet:Φ2.4mm, 3.2mm,4.0mm
Aluminum&steel rivet:Φ2.4mm, 3.2mm,4.0mm,4.8mm
Hand riveter material:Steel+Aluminium
Packed by double blister"

Brand Name: EMTOP
Included Components: Quick bar clamp
Manufacturer: EMTOP
Unit Count: 1
ASIN: 6941913630813
Size: 450mm(18")

About this item
• Clamp size:
• Max clamp force:60KGS
• Thickness and width of iron ruler:5X18mm
• Packed by label

Brand Name: EMTOP
Included Components: F clamp with plastic handle
Manufacturer: EMTOP
Unit Count: 1
ASIN: 6941913630530
Size: 300mm(12")

About this item
• Clamp size: 120x300mm
• Max clamp force: 450KGS
• Thickness and width of iron ruler: 8X30mm
• Diameter of screw thread: 15.3mm

Brand Name: EMTOP
Included Components: F clamp with plastic handle
Manufacturer: EMTOP
Unit Count: 1
ASIN: 6941913630523
Size: 250mm(10")

About this item
• Clamp size: 50x250mm
• Max clamp force: 170KGS
• Thickness and width of iron ruler: 5X15mm
• Diameter of screw thread: 11mm

Suitable range:  57-76mm
Band width:  12.7mm
The slotted hex-head screw
Band and housing in stainless steel, screw in carbon steel with zinc plated

Suitable range:  40-64mm
Band width:  12.7mm
The slotted hex-head screw
Band and housing in stainless steel, screw in carbon steel with zinc plated

Suitable range: 19-44mm
Band width: 12.7mm
The slotted hex-head screw
Band and housing in stainless steel, screw in carbon steel with zinc plated

Suitable range: 14-27mm
Band width: 12.7mm
The slotted hex-head screw
Band and housing in stainless steel, screw in carbon steel with zinc plated

Suitable range: 13-22mm
Band width: 8mm
The slotted hex-head screw
Band and housing in stainless steel, screw in carbon steel with zinc plated

Suitable range: 13-19mm
Band width: 8mm
The slotted hex-head screw
Band and housing in stainless steel, screw in carbon steel with zinc plated

Suitable range: 10-16mm
Band width: 8mm
The slotted hex-head screw
Band and housing in stainless steel, screw in carbon steel with zinc plated

Brand Name: EMTOP
Included Components: Hand riveter
Manufacturer: EMTOP
Unit Count: 1
ASIN: 6941556202316
Power Source: hand_powered
Power Plug: No Plug

About this item
• Size:10.5"
• Aluminium alloy body
• Applicable rivet
• size:2.4mm, 3.2mm,4mm,4.8mm

Brand Name: EMTOP
Included Components: Quick bar clamp
Manufacturer: EMTOP
Unit Count: 1
ASIN: 6941913630769
Size: 150mm(6")

About this item
• Clamp size:
• Max clamp force:60KGS
• Thickness and width of iron ruler:5X18mm
• Packed by label

Brand Name: EMTOP
Included Components: F clamp with plastic handle
Manufacturer: EMTOP
Unit Count: 1
ASIN: 6941913630516
Size: 200mm(8")

About this item
• Clamp size: 50x200mm
• Max clamp force: 170KGS
• Thickness and width of iron ruler: 5X15mm
• Diameter of screw thread: 11mm

9" caulking gun
Iron shank with teeth
Length:230mm(9")
Thickness?0.8mm
Diameter:51mm
Packed by label

9" caulking gun Strong aluminum handle

• Length: 230mm

• With rotary function
• Thickness：1.8mm

• Diameter: 55mm
• Smooth rod: 8.0mm

• Packed by paper card

Hammer tacker With 500pcs nails

• Wire: 1.2mm
• Crown: 11.3mm
• Length: 6-10mm

• Penetrating power and quick excellent performance
• Single-handed ergonomic grip for easy operation
• Apply to asphalt shingles on roofs plywood on sub-flooring
• Packet by double blister

• Clamp size: 80x600mm
• Max clamp force: 135KGS
• Thickness and width of iron ruler: 6X18mm

• Packed by label

Brand Name: EMTOP
Included Components: Quick bar clamp
Manufacturer: EMTOP
Unit Count: 1
ASIN: 6941913630769
Size: 300mm(12")

About this item
• Clamp size:
• Max clamp force:60KGS
• Thickness and width of iron ruler:5X18mm
• Packed by label

Features

• Compact design that fits into your pocket
• Three interchangeable nozzles (2.4mm, 3.2mm and 4.0mm)
• Installs 2.4mm rivets in one compression stroke
• Triple Moulded Grips
• Rubber damper to reduce rebound shock
• Easy spent mandrel ejection
• Includes nozzle spanner

Specifications

Documents

• Product Manual

Features

• Single or two hand operation
• Light weight cast aluminium construction
• Moulded grips
• 4 easy to change 1 piece mandrels (M3, M4, M5, M6)
• Includes 80 zinc coated steel rivet nut inserts (20 of each size)
• Blow mould case

Specifications

Documents

• Product Manual

Features

• Two hand operation
• Heavy duty aluminium & steel construction
• Moulded grips
• 6 x mandrels (M3, M4, M5, M6, M8, M10)
• Includes 60 zinc coated steel rivet nut inserts
• Mandrel spanner
• Blow mould case

Specifications

Documents

• Product Manual

Features

• Cast Aluminium Body
• Carbon Steel Handle
• Moulded Grips
• Chrome molybdenum steel collet
• Four interchangeable nozzles (2.4, 3.2, 4.0 and 4.8mm)
• Replacement Jaws: CL860-16
• Replacement Tips 2.4, 3.2, 4.0, and 4.8mm & Springs available

Specifications

Features

• Features swivel head function which allows operation from any angle
• Cast Aluminium Body
• Carbon Steel Handle
• Moulded Grips
• Chrome molybdenum steel collet
• Four interchangeable nozzles (2.4, 3.2, 4.0 and 4.8mm)
• Replacement Jaws: Part No CL860-16

Specifications

• Variable speed dial and variable speed trigger for precise control of material flow
• Durable plunger rod with auto-retract anti-drip feature
• Contoured grip with rubber overmould for comfortable use and handling
• LED for improved visibility of application
• Interchangeable cartridge holders (available separately

• Variable speed dial & trigger
• 51-533mm / Minute
• 2500N (254kg) Push force
• 310ml Carrier size
• LED light for visibility
• Durable plunger with auto-retract
• Sausage Carrier