Router & Cutting Bits

The OX Turbo Superior Diamond Blade features a 12mm segment height for cooler cutting and semi-transparent use. This professional-grade blade is perfect for general cutting tasks on construction sites, including granite, natural stone, clay products, engineering bricks, metal, concrete, steel, and other common building materials.

[additional]

The OX Pro Thunder Circular Saw Blade | 24-Tooth, made in Australia, is designed for tradesmen. With an OXLOK® Tooth Embedded Carbide Tip, it delivers outstanding cutting performance and durability. The tempered surface treatment and anti-friction finish ensure smooth, consistent cuts, while the M9-grade carbide offers superior shock resistance, ideal for demanding tasks on job sites.

[additional]

The OX Blade 230mm is engineered for efficient, precise cutting of metal, steel, and other hard materials, delivering clean, accurate results with minimal effort and reduced downtime.

Key Features

• Application suitability – Optimised for cutting metal, steel, and other hard construction materials in both professional and DIY environments.
• Design – Precision-balanced 230mm disc design for smooth, low-vibration cutting and improved control.
• Material quality – Manufactured from high-grade, wear-resistant compounds to maintain sharpness and performance over time.
• Durability – Built to withstand heavy-duty use, offering long service life even under demanding cutting conditions.
• Installation – Standard 230mm size with compatible bore for quick, hassle-free fitting to most angle grinders.
• Maintenance – Low-maintenance design that requires only basic cleaning and correct storage to preserve performance.
• Versatility – Suitable for straight cuts, trimming, and detail work across a wide range of metalworking and construction tasks.

[additional]

A-Grade 235mm timber saw blade is a circular cutting blade used for cutting timber or wood materials. The 235mm measurement is the diameter of the blade. The larger diameter generally allows for deeper cuts compared to smaller blades. These blades are designed for use with power saws or circular saws and have carbide-tipped teeth or high-quality materials to efficiently cut through wood.

Features

• Thin INOX cut-off discs for stainless steel and metal
• 1 mm thickness for fast cutting with less burring
• Complies with AS1788.1-1987 Australian Standard
• 12-pack for workshop stock

Specifications

Features

• Aluminium oxide INOX cut-off discs for stainless steel and metal
• Thin 1.2 mm discs for fast, clean cutting
• Meets AS1788.1 Australian Standard
• 12-pack for workshop stock

Specifications

Features

• Thin cut-off discs for stainless steel, steel and other ferrous metals
• 1.2 mm disc thickness for fast, clean cuts
• Rated to 13,290 RPM (80 m/s)
• Meets AS1788.1-1987 Australian Standard
• 12 discs supplied in a metal storage tin

Specifications

Features

• Grout - round 85mm blade with 30 grit carbide x 2.5mm wide
• Carbide grit edge for mortar & grout removal, aerated concrete block, soft brick, epoxy & plasterboard
• Ideal for removal of tile grout & Hebel cutting
• Compatible for use with tools with older OIS blade mounting system

Specifications

Features

• Wood & Metal - round 85mm x 18tpi blade
• Bi-Metal blade for wood, wood & nails, plasterboard, light gauge metals, aluminium & epoxy
• 85mm dimeter 3/4 round blade design enables reaching into tight corners & flush cutting
• Ideal for straight cuts in plasterboard
• Compatible for use with tools with older OIS blade mounting system

Specifications

Features

• Wood - bowed cutting edge - wide straight 65mm x 40mm x 14tpi blade
• High carbon steel blade for soft / hard wood & plywood
• Japanese tooth design for minimal heat & tear-free cuts, bowed cutting edge increases cutting speed
• Tapered body reduces jamming & minimises wear on blade
• Compatible for use with tools with older OIS blade mounting system

Specifications

Features

• Wood - bowed cutting edge - wide straight 65mm x 40mm x 20tpi
• High carbon steel blade ideal for cutting soft / hard woods, laminate & epoxy
• Bowed cutting edge for fast cut & tapered blade body to reduce jamming
• Wider blade for larger plunge cutting applications
• Compatible for use with tools with older OIS blade mounting system

Specifications

Features

• Metal - straight 20mm x 30mm x 20tpi blade
• Bi-Metal blade for wood, wood & nails, plasterboard, light gauge metals, aluminium & epoxy
• Narrow 20mm blade width allows fine narrow cutting or filigree work
• Sturdy mounting system enables hairline cuts
• Compatible for use with tools with older OIS blade mounting system

Specifications

Features

• Metal - straight 32mm x 40mm x 23tpi blade
• Tungsten carbide cutting edge for metal, stainless steel, nails, screws & non-ferrous metal
• Carbide teeth cut through hard materials with less wear, providing longer blade life
• Tapered body reduces jamming / depth measurements indicated on blade
• Compatible for use with tools with older OIS blade mounting system

Specifications

Features

• Wood - bowed cutting edge - wide straight 65mm x 40mm x 14tpi blade
• Bi-Metal blade for soft / hard wood, laminate, plasterboard & epoxy
• Japanese tooth design for minimal heat & tear-free cuts, bowed cutting edge increases cutting speed
• Tapered body reduces jamming & minimises wear on blade
• Compatible for use with tools with older OIS blade mounting system

Specifications

Features

• Wood & metal - bowed cutting edge - wide straight 65mm x 40mm x 20tpi blade
• Bi-Metal blade for wood, wood & nails, plasterboard, light gauge metals, aluminium & epoxy
• Bowed cutting edge increases cutting speed by removing waste more effectively
• Tapered body reduces jamming & minimises wear on blade
• Compatible for use with tools with older OIS blade mounting system

Specifications

Features

• Wood - straight 24mm x 50mm x 18tpi blade
• High carbon steel blade ideal for cutting soft / hard woods, laminate & epoxy
• Plunge cuts in soft wood & recesses in furniture requiring flat bottom edge
• Depth of cut measurements indicated on blade
• Compatible for use with tools with older OIS blade mounting system

Specifications

Features

• Wood - bowed cutting edge - straight 32mm x 50mm x 14tpi blade
• High carbon steel blade for soft / hard wood & plywood
• Japanese tooth design for minimal heat & tear-free cuts, bowed cutting edge increases cutting speed
• Tapered body minimises jamming & removes material faster
• Compatible for use with tools with older OIS blade mounting system

Specifications

Features

• Wood - bowed cutting edge - straight 32mm x 50mm x 18tpi blade
• High carbon steel blade ideal for cutting soft / hard woods & laminate
• Bowed cutting edge for fast cut & tapered blade body to reduce jamming
• Depth of cut measurements indicated on blade
• Compatible for use with tools with older OIS blade mounting system

Specifications

Features

• Wood - bowed cutting edge - straight 32mm x 50mm x 14tpi blade
• Bi-Metal blade for soft / hard wood, laminate, plasterboard & epoxy
• Japanese tooth design for minimal heat & tear-free cuts, bowed cutting edge increases cutting speed
• Tapered body reduces jamming & minimises wear on blade
• Compatible for use with tools with older OIS blade mounting system

Specifications

Features

• Wood & metal - bowed cutting edge - straight 32mm x 50mm x 20tpi blade
• Bi-Metal blade for wood, wood & nails, plasterboard, light gauge metals, aluminium & epoxy
• Bowed cutting edge increases cutting speed by removing waste more effectively
• Tapered body reduces jamming & minimises wear on blade
• Compatible for use with tools with older OIS blade mounting system

Specifications

Features

• Metal - straight 32mm x 50mm x 20tpi blade
• Bi-Metal blade for wood, wood & nails, plasterboard, light gauge metals, aluminium & epoxy
• Tapered blade body to reduce jamming / depth measurements indicated on blade
• Sturdy mounting system reduces wobbling for longer usage
• Compatible for use with tools with older OIS blade mounting system

Specifications

Features

• 2.3mm Kerf / FTG ( Flap Top Grind ) tooth shape / Max 9,250rpm
• Specialized blade for circular saw & plunge saw
• Polycrystalline diamond edges have been added to the tungsten carbide tips of this range of saw blade to produce long lasting product
• Suitable for cutting all densities & thickness of fibre cement sheeting
• M-Class dust extraction should be used when cutting with these blades

Specifications

Features

• 1.45mm Kerf / TCG ( Triple Chip Ground ) tooth shape / Max 9,250rpm
• Cross Cut blade - also suitable for plunge saws
• 100% longer run time with extra hard blade tips
• Thin Kerf to reduce the load during cutting for longer run time
• Special Tooth Design = increased efficiency of off cut removal

Specifications

Features

• 1.4mm Kerf / TCG ( Triple Chip Grind ) tooth shape / Max 9,250rpm
• Rip & Cross Cut blade - also suitable for plunge saws
• 25% more cuts per charge / 25% faster cut speed - compared to standard wood blades
• Thin Kerf to reduce the load during cutting for longer run time
• Special Tooth Design = increased efficiency of off cut removal

Specifications

Features

• 1.45mm Kerf / ATAFR ( Alternate Top / Alternate Face & Raker ) tooth shape / Max 8,250rpm
• Rip & Cross Cut blade ideal for cordless & 240v saws
• 40% more cuts per charge / 40% faster cut speed - compared to standard wood blades
• Thin Kerf to reduce the load during cutting for longer run time
• Special Tooth Design = increased efficiency of off cut removal

Specifications

Features

• 2.3mm Kerf / ATAF ( Alternate Top & Alternate Face ) tooth shape / Max 5,870rpm
• BlueMak coating resists "pitch" build up, eliminates corrosion & prevents friction
• High grade tungsten / Precision honed for a sharper & longer lasting edge
• Thin kerf for less waste & reduced feed pressure

Specifications

Features

• 1.9mm Kerf / ATB ( Alternate Top Bevel ) tooth shape / Max 7,300rpm
• BlueMak coating resists "pitch" build up, eliminates corrosion & prevents friction
• High grade tungsten / Precision honed for a sharper & longer lasting edge
• Thin kerf for less waste & reduced feed pressure

Specifications

Features

• 1.8mm Kerf / ATB ( Alternate Top Bevel ) tooth shape / Max 8,250rpm
• BlueMak coating resists "pitch" build up, eliminates corrosion & prevents friction
• High grade tungsten / Precision honed for a sharper & longer lasting edge
• Thin kerf for less waste & reduced feed pressure

Specifications

Features

• 2.0mm Kerf / ATB ( Alternate Top Bevel ) tooth shape / Max 7,070rpm
• BlueMak coating resists "pitch" build up, eliminates corrosion & prevents friction
• High grade tungsten / Precision honed for a sharper & longer lasting edge
• Thin kerf for less waste & reduced feed pressure

Specifications

Features

• 1.6mm Kerf / ATB ( Alternate Top Bevel ) tooth shape / Max 9,450rpm
• BlueMak coating resists "pitch" build up, eliminates corrosion & prevents friction
• High grade tungsten / Precision honed for a sharper & longer lasting edge
• Thin kerf for less waste & reduced feed pressure

Specifications

Features

• 1.8mm Kerf / ATB ( Alternate Top Bevel ) tooth shape / Max 9,450rpm
• BlueMak coating resists "pitch" build up, eliminates corrosion & prevents friction
• High grade tungsten / Precision honed for a sharper & longer lasting edge
• Thin kerf for less waste & reduced feed pressure

Specifications

Features

• 2.0mm Kerf / ATB ( Alternate Top Bevel ) tooth shape / Max 8,040rpm
• BlueMak coating resists "pitch" build up, eliminates corrosion & prevents friction
• High grade tungsten / Precision honed for a sharper & longer lasting edge
• Thin kerf for less waste & reduced feed pressure

Specifications

Features

• 1.8mm Kerf / ATAF ( Alternate Top & Alternate Face ) tooth shape / Max 8,040rpm
• BlueMak coating resists "pitch" build up, eliminates corrosion & prevents friction
• High grade tungsten / Precision honed for a sharper & longer lasting edge
• Thin kerf for less waste & reduced feed pressure

Specifications

Features

• 1.6mm Kerf / ATAF ( Alternate Top & Alternate Face ) tooth shape / Max 9,250rpm
• BlueMak coating resists "pitch" build up, eliminates corrosion & prevents friction
• High grade tungsten / Precision honed for a sharper & longer lasting edge
• Thin kerf for less waste & reduced feed pressure

Specifications

Features

• 1.5mm Kerf / ATAF ( Alternate Top & Alternate Face ) tooth shape / Max 6,500rpm
• BlueMak coating resists "pitch" build up, eliminates corrosion & prevents friction
• High grade tungsten / Precision honed for a sharper & longer lasting edge
• Thin kerf for less waste & reduced feed pressure

Specifications

Features

• 2.3mm Kerf / ATB ( Alternate Top Bevel ) tooth shape / Max 6,500rpm
• BlueMak coating resists "pitch" build up, eliminates corrosion & prevents friction
• High grade tungsten / Precision honed for a sharper & longer lasting edge
• Thin kerf for less waste & reduced feed pressure

Specifications

Features

• 2.3mm Kerf / ATB ( Alternate Top Bevel ) tooth shape / Max 5,990rpm
• BlueMak coating resists "pitch" build up, eliminates corrosion & prevents friction
• High grade tungsten / Precision honed for a sharper & longer lasting edge
• Thin kerf for less waste & reduced feed pressure

Specifications

Features

• 1.8mm Kerf / ATB ( Alternate Top Bevel ) tooth shape / Max 8,250rpm
• BlueMak coating resists "pitch" build up, eliminates corrosion & prevents friction
• High grade tungsten / Precision honed for a sharper & longer lasting edge
• Thin kerf for less waste & reduced feed pressure

Specifications

Features

• 1.6mm Kerf / ATAF ( Alternate Top & Alternate Face ) tooth shape / Max 6,500rpm
• BlueMak coating resists "pitch" build up, eliminates corrosion & prevents friction
• High grade tungsten / Precision honed for a sharper & longer lasting edge
• Thin kerf for less waste & reduced feed pressure

Specifications

Product Features

Garrick compact drill sharpener is perfect for workshops, fabrication shops and the home hobbiest who requires drill bit sharpening. Garrick Drill bit sharpener accepts HSS drill bits 3 ~ 13mm or 1/8″ ~ 1/2″ with a recommended minimum drill length of 85mm.

Features & Specifications include:
Tough plastic construction
Single chuck holding system
Can sharpen metric and imperial drill bits
CBN wheel provides superior grind finish
Grinds two flute drills of unlimited length
User friendly hand operated sharpener
Capable of split point sharpening
118º fixed drill point
80W, 4200 rpm, 240V motor

RS 993 PQ Special Bi-metal reciprocating saw blade milled and set

Advantages: Saw blade in bi-metal construction and with Vario toothing - Universally suitable for metal, non-ferrous metals, wood and plastics - Fast cut - Top seller for pallets (wood with nails)

Specifications

• Class: Special
• Materials: Fibre reinforced plastics, Epoxy resin, Steel, Stainless steel, NF metals, Aluminium, Wood with nails
• Applications: Pallet service

RS 603 WF Supra Cr-V reciprocating saw blade milled and set

Advantages: Universal saw blade for wooden beams and construction timber with larger material cross-sections - Fine cutting edges - Also for curved cuts in wood-based material and kitchen worktops - Also suitable for cutting plastic tubes

Specifications

• Class: Supra
• Materials: Softwood, Construction wood, Plywood, Chipboard
• Applications: Demolition company, Fitters, Maintenance, Woodworking craft

Built with the tradesman in mind, the OX Pro Hacksaw Blades, a pack of four blades at 300mm or 12 inches, offer exceptional versatility and reliability for various cutting needs. Their portability and lightweight design make them ideal for on-the-go use, ensuring convenience without compromising on performance. These multi-purpose blades are adept both indoors and outdoors, adaptable to diverse surfaces, and suited for various cutting tasks. The incorporation of a high-speed tooth strip on a flexible back enhances durability and resilience against wear, ensuring prolonged use without losing cutting efficiency. Complemented by a slip-resistant grip design, these blades promise comfortable handling, enabling precise and controlled cutting even in demanding conditions. OX’s Hacksaw Blades stand as a testament to durability, adaptability, and user-centric design, making them an essential tool in the arsenal of tradespeople.

• Portable and lightweight
• Blades are multi-purpose and can be used outdoors as well as indoors on any surface
• High-speed tooth strip on a flexible back for greater resistance against tooth strip page
• Comfortable slip-resistant grip design

Built with the tradesman in mind, the OX Pro Hacksaw Blades, a pack of four blades at 300mm or 12 inches, offer exceptional versatility and reliability for various cutting needs. Their portability and lightweight design make them ideal for on-the-go use, ensuring convenience without compromising on performance. These multi-purpose blades are adept both indoors and outdoors, adaptable to diverse surfaces, and suited for various cutting tasks. The incorporation of a high-speed tooth strip on a flexible back enhances durability and resilience against wear, ensuring prolonged use without losing cutting efficiency. Complemented by a slip-resistant grip design, these blades promise comfortable handling, enabling precise and controlled cutting even in demanding conditions. OX’s Hacksaw Blades stand as a testament to durability, adaptability, and user-centric design, making them an essential tool in the arsenal of tradespeople.

• Portable and lightweight
• Blades are multi-purpose and can be used outdoors as well as indoors on any surface
• High-speed tooth strip on a flexible back for greater resistance against tooth strip page
• Comfortable slip-resistant grip design