DT 900 B Special Large diamond cutting blades

Advantages: Titanium-coated diamonds for first-rate cutting performance - Fast cutting speed even on reinforced concrete - Unrivalled service life - Designed for professional applications on concrete

Specifications

• Class: Special
• Segmentation: Turbo
• Design: Laser welded
• Materials: Cured concrete, reinforced, Concrete, Construction materials, Chalky sandstone
• Applications: Building construction, Gardening and landscaping

DT 900 B Special Large diamond cutting blades

Advantages: Titanium-coated diamonds for first-rate cutting performance - Fast cutting speed even on reinforced concrete - Unrivalled service life - Designed for professional applications on concrete

Specifications

• Class: Special
• Segmentation: Turbo
• Design: Laser welded
• Materials: Cured concrete, reinforced, Concrete, Construction materials, Chalky sandstone
• Applications: Building construction, Gardening and landscaping

The diamond cutting blade DT 900 UT Special – more power thanks to a turbo rim

The sintered diamond cutting blade DT 900 UT Special by Klingspor realises its full potential during use on the construction size - it slices effortlessly through a large variety of different materials: concrete, roofing tiles and all other construction materials. This makes it a versatile tool and the perfect helper for a wide range of different challenges. The diamond cutting blade DT 900 UT Special is suitable for use on standard angle grinders with a 22.23 mm mounting. Its innovative technology allows for work with rapid speed and maximum safety.

Wave-shaped core – perfect cooling at high cutting speed

The diamond cutting blade DT 900 UT Special has been designed for operating speeds of up to 80 m/s. Boasting a diameter of 100 mm, this cutting blade can be used at a maximum rotational speed of more than 15,000 revolutions per minute. The wave-shaped core ensures optimum heat dissipation. Holes embedded in the blade provide for additional cooling. The blade can be used for both wet and dry cutting. The diamond cutting blade DT 900 UT Special delivers a high level of aggressiveness and above-average service life. A member of the 900 product line, it is designed as a high-performance product: Klingspor guarantees top level performance and perfect reliability even under the most extreme conditions. Naturally, the diamond cutting blade DT 900 UT Special also conforms to European safety standard EN 13236 and the strict oSa guidelines.

Slice through concrete, construction materials and roofing tiles with the turbo rim

The diamond cutting blade DT 900 UT Special is equipped with a special turbo rim. This closed cutting edge produces clean and chip-free edges. At the same time, the turbo rim provides for smooth operation and, thus, a reduced noise level. The material is removed quickly and thoroughly thanks to the sharp diamond edges. This makes it possible to even slice through hard material with amazing ease and to guide the angle grinder comfortably and with great precision. Klingspor relies on highly advanced abrasive technology to produce their diamond tools: The diamonds are bonded securely in the blade, keeping them from detaching prematurely. The razor-sharp crystal edges smoothly work their way through even the toughest mineral-based materials until they are worn out completely. To live up to this promise, Klingspor produces exclusively in house – ensuring that all components are matched perfectly to one another.

Specifications

• Class: Special
• Segmentation: Turbo continuous rim
• Design: Sintered
• Materials: Concrete, Construction materials, Roof tiles
• Applications: Building construction, Construction businesses, Roofers

The diamond cutting blade DT 900 UT Special – more power thanks to a turbo rim

The sintered diamond cutting blade DT 900 UT Special by Klingspor realises its full potential during use on the construction size - it slices effortlessly through a large variety of different materials: concrete, roofing tiles and all other construction materials. This makes it a versatile tool and the perfect helper for a wide range of different challenges. The diamond cutting blade DT 900 UT Special is suitable for use on standard angle grinders with a 22.23 mm mounting. Its innovative technology allows for work with rapid speed and maximum safety.

Wave-shaped core – perfect cooling at high cutting speed

The diamond cutting blade DT 900 UT Special has been designed for operating speeds of up to 80 m/s. Boasting a diameter of 100 mm, this cutting blade can be used at a maximum rotational speed of more than 15,000 revolutions per minute. The wave-shaped core ensures optimum heat dissipation. Holes embedded in the blade provide for additional cooling. The blade can be used for both wet and dry cutting. The diamond cutting blade DT 900 UT Special delivers a high level of aggressiveness and above-average service life. A member of the 900 product line, it is designed as a high-performance product: Klingspor guarantees top level performance and perfect reliability even under the most extreme conditions. Naturally, the diamond cutting blade DT 900 UT Special also conforms to European safety standard EN 13236 and the strict oSa guidelines.

Slice through concrete, construction materials and roofing tiles with the turbo rim

The diamond cutting blade DT 900 UT Special is equipped with a special turbo rim. This closed cutting edge produces clean and chip-free edges. At the same time, the turbo rim provides for smooth operation and, thus, a reduced noise level. The material is removed quickly and thoroughly thanks to the sharp diamond edges. This makes it possible to even slice through hard material with amazing ease and to guide the angle grinder comfortably and with great precision. Klingspor relies on highly advanced abrasive technology to produce their diamond tools: The diamonds are bonded securely in the blade, keeping them from detaching prematurely. The razor-sharp crystal edges smoothly work their way through even the toughest mineral-based materials until they are worn out completely. To live up to this promise, Klingspor produces exclusively in house – ensuring that all components are matched perfectly to one another.

Specifications

• Class: Special
• Segmentation: Turbo continuous rim
• Design: Sintered
• Materials: Concrete, Construction materials, Roof tiles
• Applications: Building construction, Construction businesses, Roofers

The diamond cutting blade DT 900 UT Special – more power thanks to a turbo rim

The sintered diamond cutting blade DT 900 UT Special by Klingspor realises its full potential during use on the construction size - it slices effortlessly through a large variety of different materials: concrete, roofing tiles and all other construction materials. This makes it a versatile tool and the perfect helper for a wide range of different challenges. The diamond cutting blade DT 900 UT Special is suitable for use on standard angle grinders with a 22.23 mm mounting. Its innovative technology allows for work with rapid speed and maximum safety.

Wave-shaped core – perfect cooling at high cutting speed

The diamond cutting blade DT 900 UT Special has been designed for operating speeds of up to 80 m/s. Boasting a diameter of 100 mm, this cutting blade can be used at a maximum rotational speed of more than 15,000 revolutions per minute. The wave-shaped core ensures optimum heat dissipation. Holes embedded in the blade provide for additional cooling. The blade can be used for both wet and dry cutting. The diamond cutting blade DT 900 UT Special delivers a high level of aggressiveness and above-average service life. A member of the 900 product line, it is designed as a high-performance product: Klingspor guarantees top level performance and perfect reliability even under the most extreme conditions. Naturally, the diamond cutting blade DT 900 UT Special also conforms to European safety standard EN 13236 and the strict oSa guidelines.

Slice through concrete, construction materials and roofing tiles with the turbo rim

The diamond cutting blade DT 900 UT Special is equipped with a special turbo rim. This closed cutting edge produces clean and chip-free edges. At the same time, the turbo rim provides for smooth operation and, thus, a reduced noise level. The material is removed quickly and thoroughly thanks to the sharp diamond edges. This makes it possible to even slice through hard material with amazing ease and to guide the angle grinder comfortably and with great precision. Klingspor relies on highly advanced abrasive technology to produce their diamond tools: The diamonds are bonded securely in the blade, keeping them from detaching prematurely. The razor-sharp crystal edges smoothly work their way through even the toughest mineral-based materials until they are worn out completely. To live up to this promise, Klingspor produces exclusively in house – ensuring that all components are matched perfectly to one another.

Specifications

• Class: Special
• Segmentation: Turbo continuous rim
• Design: Sintered
• Materials: Concrete, Construction materials, Roof tiles
• Applications: Building construction, Construction businesses, Roofers

The diamond cutting blade DT 900 UT Special – more power thanks to a turbo rim

The sintered diamond cutting blade DT 900 UT Special by Klingspor realises its full potential during use on the construction size - it slices effortlessly through a large variety of different materials: concrete, roofing tiles and all other construction materials. This makes it a versatile tool and the perfect helper for a wide range of different challenges. The diamond cutting blade DT 900 UT Special is suitable for use on standard angle grinders with a 22.23 mm mounting. Its innovative technology allows for work with rapid speed and maximum safety.

Wave-shaped core – perfect cooling at high cutting speed

The diamond cutting blade DT 900 UT Special has been designed for operating speeds of up to 80 m/s. Boasting a diameter of 100 mm, this cutting blade can be used at a maximum rotational speed of more than 15,000 revolutions per minute. The wave-shaped core ensures optimum heat dissipation. Holes embedded in the blade provide for additional cooling. The blade can be used for both wet and dry cutting. The diamond cutting blade DT 900 UT Special delivers a high level of aggressiveness and above-average service life. A member of the 900 product line, it is designed as a high-performance product: Klingspor guarantees top level performance and perfect reliability even under the most extreme conditions. Naturally, the diamond cutting blade DT 900 UT Special also conforms to European safety standard EN 13236 and the strict oSa guidelines.

Slice through concrete, construction materials and roofing tiles with the turbo rim

The diamond cutting blade DT 900 UT Special is equipped with a special turbo rim. This closed cutting edge produces clean and chip-free edges. At the same time, the turbo rim provides for smooth operation and, thus, a reduced noise level. The material is removed quickly and thoroughly thanks to the sharp diamond edges. This makes it possible to even slice through hard material with amazing ease and to guide the angle grinder comfortably and with great precision. Klingspor relies on highly advanced abrasive technology to produce their diamond tools: The diamonds are bonded securely in the blade, keeping them from detaching prematurely. The razor-sharp crystal edges smoothly work their way through even the toughest mineral-based materials until they are worn out completely. To live up to this promise, Klingspor produces exclusively in house – ensuring that all components are matched perfectly to one another.

Specifications

• Class: Special
• Segmentation: Turbo continuous rim
• Design: Sintered
• Materials: Concrete, Construction materials, Roof tiles
• Applications: Building construction, Construction businesses, Roofers

The diamond cutting blade DT 900 UT Special – more power thanks to a turbo rim

The sintered diamond cutting blade DT 900 UT Special by Klingspor realises its full potential during use on the construction size - it slices effortlessly through a large variety of different materials: concrete, roofing tiles and all other construction materials. This makes it a versatile tool and the perfect helper for a wide range of different challenges. The diamond cutting blade DT 900 UT Special is suitable for use on standard angle grinders with a 22.23 mm mounting. Its innovative technology allows for work with rapid speed and maximum safety.

Wave-shaped core – perfect cooling at high cutting speed

The diamond cutting blade DT 900 UT Special has been designed for operating speeds of up to 80 m/s. Boasting a diameter of 100 mm, this cutting blade can be used at a maximum rotational speed of more than 15,000 revolutions per minute. The wave-shaped core ensures optimum heat dissipation. Holes embedded in the blade provide for additional cooling. The blade can be used for both wet and dry cutting. The diamond cutting blade DT 900 UT Special delivers a high level of aggressiveness and above-average service life. A member of the 900 product line, it is designed as a high-performance product: Klingspor guarantees top level performance and perfect reliability even under the most extreme conditions. Naturally, the diamond cutting blade DT 900 UT Special also conforms to European safety standard EN 13236 and the strict oSa guidelines.

Slice through concrete, construction materials and roofing tiles with the turbo rim

The diamond cutting blade DT 900 UT Special is equipped with a special turbo rim. This closed cutting edge produces clean and chip-free edges. At the same time, the turbo rim provides for smooth operation and, thus, a reduced noise level. The material is removed quickly and thoroughly thanks to the sharp diamond edges. This makes it possible to even slice through hard material with amazing ease and to guide the angle grinder comfortably and with great precision. Klingspor relies on highly advanced abrasive technology to produce their diamond tools: The diamonds are bonded securely in the blade, keeping them from detaching prematurely. The razor-sharp crystal edges smoothly work their way through even the toughest mineral-based materials until they are worn out completely. To live up to this promise, Klingspor produces exclusively in house – ensuring that all components are matched perfectly to one another.

Specifications

• Class: Special
• Segmentation: Turbo continuous rim
• Design: Sintered
• Materials: Concrete, Construction materials, Roof tiles
• Applications: Building construction, Construction businesses, Roofers

RS 603 WF Supra Cr-V reciprocating saw blade milled and set

Advantages: Universal saw blade for wooden beams and construction timber with larger material cross-sections - Fine cutting edges - Also for curved cuts in wood-based material and kitchen worktops - Also suitable for cutting plastic tubes

Specifications

• Class: Supra
• Materials: Softwood, Construction wood, Plywood, Chipboard
• Applications: Demolition company, Fitters, Maintenance, Woodworking craft

RS 993 PQ Special Bi-metal reciprocating saw blade milled and set

Advantages: Saw blade in bi-metal construction and with Vario toothing - Universally suitable for metal, non-ferrous metals, wood and plastics - Fast cut - Top seller for pallets (wood with nails)

Specifications

• Class: Special
• Materials: Fibre reinforced plastics, Epoxy resin, Steel, Stainless steel, NF metals, Aluminium, Wood with nails
• Applications: Pallet service

Features

• 1.6mm Kerf / ATAF ( Alternate Top & Alternate Face ) tooth shape / Max 6,500rpm
• BlueMak coating resists "pitch" build up, eliminates corrosion & prevents friction
• High grade tungsten / Precision honed for a sharper & longer lasting edge
• Thin kerf for less waste & reduced feed pressure

Specifications

Features

• 1.8mm Kerf / ATB ( Alternate Top Bevel ) tooth shape / Max 8,250rpm
• BlueMak coating resists "pitch" build up, eliminates corrosion & prevents friction
• High grade tungsten / Precision honed for a sharper & longer lasting edge
• Thin kerf for less waste & reduced feed pressure

Specifications

Features

• 2.3mm Kerf / ATB ( Alternate Top Bevel ) tooth shape / Max 5,990rpm
• BlueMak coating resists "pitch" build up, eliminates corrosion & prevents friction
• High grade tungsten / Precision honed for a sharper & longer lasting edge
• Thin kerf for less waste & reduced feed pressure

Specifications

Features

• 2.3mm Kerf / ATB ( Alternate Top Bevel ) tooth shape / Max 6,500rpm
• BlueMak coating resists "pitch" build up, eliminates corrosion & prevents friction
• High grade tungsten / Precision honed for a sharper & longer lasting edge
• Thin kerf for less waste & reduced feed pressure

Specifications

Features

• 1.5mm Kerf / ATAF ( Alternate Top & Alternate Face ) tooth shape / Max 6,500rpm
• BlueMak coating resists "pitch" build up, eliminates corrosion & prevents friction
• High grade tungsten / Precision honed for a sharper & longer lasting edge
• Thin kerf for less waste & reduced feed pressure

Specifications

Features

• 1.6mm Kerf / ATAF ( Alternate Top & Alternate Face ) tooth shape / Max 9,250rpm
• BlueMak coating resists "pitch" build up, eliminates corrosion & prevents friction
• High grade tungsten / Precision honed for a sharper & longer lasting edge
• Thin kerf for less waste & reduced feed pressure

Specifications

Features

• 1.8mm Kerf / ATAF ( Alternate Top & Alternate Face ) tooth shape / Max 8,040rpm
• BlueMak coating resists "pitch" build up, eliminates corrosion & prevents friction
• High grade tungsten / Precision honed for a sharper & longer lasting edge
• Thin kerf for less waste & reduced feed pressure

Specifications

Features

• 2.0mm Kerf / ATB ( Alternate Top Bevel ) tooth shape / Max 8,040rpm
• BlueMak coating resists "pitch" build up, eliminates corrosion & prevents friction
• High grade tungsten / Precision honed for a sharper & longer lasting edge
• Thin kerf for less waste & reduced feed pressure

Specifications

Features

• 1.6mm Kerf / ATB ( Alternate Top Bevel ) tooth shape / Max 9,450rpm
• BlueMak coating resists "pitch" build up, eliminates corrosion & prevents friction
• High grade tungsten / Precision honed for a sharper & longer lasting edge
• Thin kerf for less waste & reduced feed pressure

Specifications

Features

• 2.0mm Kerf / ATB ( Alternate Top Bevel ) tooth shape / Max 7,070rpm
• BlueMak coating resists "pitch" build up, eliminates corrosion & prevents friction
• High grade tungsten / Precision honed for a sharper & longer lasting edge
• Thin kerf for less waste & reduced feed pressure

Specifications

Features

• 1.9mm Kerf / ATB ( Alternate Top Bevel ) tooth shape / Max 7,300rpm
• BlueMak coating resists "pitch" build up, eliminates corrosion & prevents friction
• High grade tungsten / Precision honed for a sharper & longer lasting edge
• Thin kerf for less waste & reduced feed pressure

Specifications

Features

• 2.3mm Kerf / ATAF ( Alternate Top & Alternate Face ) tooth shape / Max 5,870rpm
• BlueMak coating resists "pitch" build up, eliminates corrosion & prevents friction
• High grade tungsten / Precision honed for a sharper & longer lasting edge
• Thin kerf for less waste & reduced feed pressure

Specifications

Features

• 1.45mm Kerf / ATAFR ( Alternate Top / Alternate Face & Raker ) tooth shape / Max 8,250rpm
• Rip & Cross Cut blade ideal for cordless & 240v saws
• 40% more cuts per charge / 40% faster cut speed - compared to standard wood blades
• Thin Kerf to reduce the load during cutting for longer run time
• Special Tooth Design = increased efficiency of off cut removal

Specifications

Features

• 1.4mm Kerf / TCG ( Triple Chip Grind ) tooth shape / Max 9,250rpm
• Rip & Cross Cut blade - also suitable for plunge saws
• 25% more cuts per charge / 25% faster cut speed - compared to standard wood blades
• Thin Kerf to reduce the load during cutting for longer run time
• Special Tooth Design = increased efficiency of off cut removal

Specifications

Features

• 1.45mm Kerf / TCG ( Triple Chip Ground ) tooth shape / Max 9,250rpm
• Cross Cut blade - also suitable for plunge saws
• 100% longer run time with extra hard blade tips
• Thin Kerf to reduce the load during cutting for longer run time
• Special Tooth Design = increased efficiency of off cut removal

Specifications

Features

• Grout - round 85mm blade with 30 grit carbide x 2.5mm wide
• Carbide grit edge for mortar & grout removal, aerated concrete block, soft brick, epoxy & plasterboard
• Ideal for removal of tile grout & Hebel cutting
• Compatible for use with tools with older OIS blade mounting system

Specifications