Corinthian Door

Balmoral PBAL 3 is an internal door with primed MDF skins and a square-corner rout on both faces. This door is 2040 x 520 x 35 mm.

Key features

• Primed MDF skins.
• Square-corner rout on both faces.
• The pattern is carved on both sides.
• In NSW, VIC, QLD and SA this design is supplied with an Ultima core.
• Primed skin. The routing and the door edges are not primed.
• Three hinges are recommended, and they are a minimum on 2340 mm doors and on medium- to high-density cores.
• Gloss, flat, semi-gloss, or satin paint can be applied.
• Warranty is 5 years. Terms apply.

Finishing and care

The door is supplied raw. Up to 5 mm can be trimmed from the top, the bottom, and each stile. Sizes are nominal and in millimetres. Gloss, flat, semi-gloss, or satin paint can be applied to the door surfaces.

Specifications

Downloads

• Door installation
• Door care and maintenance

Balmoral PBAL 12 is an internal door with primed MDF skins and a square-corner rout on both faces. This door is 2040 x 420 x 35 mm.

Key features

• Primed MDF skins.
• Square-corner rout on both faces.
• The pattern is carved on both sides.
• In NSW, VIC, QLD and SA this design is supplied with an Ultima core.
• Primed skin. The routing and the door edges are not primed.
• Three hinges are recommended, and they are a minimum on 2340 mm doors and on medium- to high-density cores.
• Gloss, flat, semi-gloss, or satin paint can be applied.
• Warranty is 5 years. Terms apply.

Finishing and care

The door is supplied raw. Up to 5 mm can be trimmed from the top, the bottom, and each stile. Sizes are nominal and in millimetres. Gloss, flat, semi-gloss, or satin paint can be applied to the door surfaces.

Specifications

Downloads

• Door installation
• Door care and maintenance

Balmoral PBAL 1 is an internal door with primed MDF skins and a square-corner rout on both faces. This door is 2040 x 420 x 35 mm.

Key features

• Primed MDF skins.
• Square-corner rout on both faces.
• The pattern is carved on both sides.
• In NSW, VIC, QLD and SA this design is supplied with an Ultima core.
• Primed skin. The routing and the door edges are not primed.
• Ultima core acoustic rating Rw 31 (STC 31).
• Three hinges are recommended, and they are a minimum on 2340 mm doors and on medium- to high-density cores.
• Gloss, flat, semi-gloss, or satin paint can be applied.
• Warranty is 5 years. Terms apply.

Finishing and care

The door is supplied raw. Up to 5 mm can be trimmed from the top, the bottom, and each stile. Sizes are nominal and in millimetres. Gloss, flat, semi-gloss, or satin paint can be applied to the door surfaces.

Specifications

Downloads

• Door installation
• Door care and maintenance

The Corinthian Balmoral PBAL 4G is an internal door with a deep carved pattern on both sides and a square corner rout. This leaf is 2040 x 720 x 35 mm, with primed MDF skins and clear glass. In NSW, VIC, QLD, and SA it is supplied with a solid MDF core. It is pre-primed and ready to paint in gloss, flat, semi-gloss, or satin. The primed skin does not cover the routing, the door edges, the glass opening rebate, or the glazing bead. The glazing complies with AS1288:2021. Solid-core PBAL 4G is rated Rw33 (STC 33). Up to 5 mm can be trimmed from the top, the bottom, and each stile. Three hinges are recommended. Warranty is 5 years.

Downloads

• Door installation
• Door care and maintenance

Balmoral PBAL 11 is an internal door with primed MDF skins and a square-corner rout on both faces. This door is 2040 x 420 x 35 mm.

Key features

• Primed MDF skins.
• Square-corner rout on both faces.
• The pattern is carved on both sides.
• In NSW, VIC, QLD and SA this design is supplied with an Ultima core.
• Primed skin. The routing and the door edges are not primed.
• Three hinges are recommended, and they are a minimum on 2340 mm doors and on medium- to high-density cores.
• Gloss, flat, semi-gloss, or satin paint can be applied.
• Warranty is 5 years. Terms apply.

Finishing and care

The door is supplied raw. Up to 5 mm can be trimmed from the top, the bottom, and each stile. Sizes are nominal and in millimetres. Gloss, flat, semi-gloss, or satin paint can be applied to the door surfaces.

Specifications

Downloads

• Door installation
• Door care and maintenance

Balmoral PBAL 10 is an internal door with primed MDF skins and a square-corner rout on both faces. This door is 2040 x 620 x 35 mm.

Key features

• Primed MDF skins.
• Square-corner rout on both faces.
• The pattern is carved on both sides.
• In NSW, VIC, QLD and SA this design is supplied with an Ultima core.
• Primed skin. The routing and the door edges are not primed.
• Three hinges are recommended, and they are a minimum on 2340 mm doors and on medium- to high-density cores.
• Gloss, flat, semi-gloss, or satin paint can be applied.
• Warranty is 5 years. Terms apply.

Finishing and care

The door is supplied raw. Up to 5 mm can be trimmed from the top, the bottom, and each stile. Sizes are nominal and in millimetres. Gloss, flat, semi-gloss, or satin paint can be applied to the door surfaces.

Specifications

Downloads

• Door installation
• Door care and maintenance