Knauf

Knauf paper joint tape is a high-tensile cross-fibre paper tape with a centre crease. It resists stretching, wrinkling and tearing under the knife and is designed for Knauf joint compounds.

This listing is the DIY roll 50 mm × 23 m (Knauf material 00820738 / SKU 820738, TMK T23). The trade T76 roll is 52 mm × 76 m.

Features

• High tensile strength paper
• Superior centre crease
• Rough texture for adhesion
• Use with Knauf setting and premix compounds

This Roll

Applications

• Hand-taping plasterboard joints with BaseCote™ or premix

Documents

• Plasterboard Installation Manual
• Compounds and Adhesives Catalogue

Knauf TradeMark T76 paper joint tape is a perforated paper tape for embedding in setting or premix compounds. It reinforces plasterboard joints and corners, has a centre crease for folding, and is the recommended tape for high-strength three-coat jointing.

This listing is for one 52 mm × 76 m roll (Knauf material 00820737 / catalogue 40005981).

Features

• Perforated paper for a strong bond with compound
• Centre crease for easy folding on internal corners
• High tensile strength — preferred over mesh for full jointing systems
• Suitable for hand or mechanical application

This Pack

Applications

• Tape coat on recessed plasterboard joints with BaseCote™
• Internal corners (fold on the centre crease)

Documents

• Compounds and Adhesives Selector Chart
• Compounds and Adhesives Catalogue

Knauf Super-Fibre / DIY fibreglass joint tape is a self-adhesive mesh tape for plasterboard joints and surface repairs. It sticks without a bedding coat of compound.

This listing is one 50 mm × 20 m DIY roll (Knauf material 00828262 / SKU 828262, DIYFT).

Features

• Self-adhesive fibreglass mesh
• Apply without compound
• Does not stretch or shrink
• Also useful for crack repair

This Roll

Applications

• DIY plasterboard joints and hole/crack repairs

Documents

• Plasterboard Installation Manual
• Compounds and Adhesives Catalogue

TradeMark CS8 collated plasterboard screws are 6G × 25 mm bugle-head coarse-thread (W) screws for fixing plasterboard to timber. Knauf invoices this 1000-pack as material 00832946.

This listing is for one 1000-pack of collated 6G × 25 mm plasterboard screws (TradeMark CS8).

Features

• 6G × 25 mm bugle head
• Coarse (W) thread for timber framing
• Collated strip for auto-feed screw guns
• PH2 drive; 1000 screws per pack

This Pack

Applications

• Fixing 10 mm plasterboard to timber studs and noggings
• Use a fine-thread / needle-point screw for light-gauge steel framing

Documents

Knauf / Wallboard Tools slotted sandpaper is made for sanding plasterboard joints with a hand or pole sander. 150 grit paper removes compound ridges before paint.

This listing is small 85 × 305 mm sandpaper, 150 grit (Knauf material 00826246 / SKU 826246, S-150). Invoiced as 20 PC.

Features

• 150 grit
• Slotted small sheets to suit hand sander
• Slotted sandpaper
• Pack of 20

This Pack

Applications

• Sanding plasterboard joints after compound has dried

Documents

• Plasterboard Installation Manual

Knauf / Wallboard Tools slotted sandpaper is made for sanding plasterboard joints with a hand or pole sander. 150 grit paper removes compound ridges before paint.

This listing is large 110 × 370 mm sandpaper, 150 grit (Knauf material 00826245 / SKU 826245, LS-150). Invoiced as 20 PC.

Features

• 150 grit
• Slotted large sheets to suit hand sander
• Slotted sandpaper
• Pack of 20

This Pack

Applications

• Sanding plasterboard joints after compound has dried

Documents

• Plasterboard Installation Manual

Knauf plasterboard repair patch is a self-adhesive metal-mesh patch for holes in plasterboard walls and ceilings.

This listing is for one 200 × 200 mm DIY repair patch (Knauf material 00826214 / SKU 826214, DIYRP200).

Features

• Self-adhesive metal mesh
• Larger 200 mm patch for bigger holes
• Interior use

This Patch

Applications

• Patching larger holes in plasterboard before compound and paint

Documents

• Plasterboard Installation Manual

Knauf plasterboard repair patch is a self-adhesive metal-mesh patch for small holes in plasterboard walls and ceilings. Stick it over the hole, then coat with joint compound and sand.

This listing is for one 100 × 100 mm DIY repair patch (Knauf material 00826213 / SKU 826213, DIYRP100).

Features

• Self-adhesive — no bedding coat required to stick
• Tough metal mesh
• Quick DIY hole repair
• Interior plasterboard walls and ceilings

This Patch

Applications

• Patching small holes in plasterboard before compound and paint

Documents

• Plasterboard Installation Manual

Knauf Mitre Master (Mitre Mate) is a yellow plastic template that guides internal and external mitre cuts on cove cornice. Place the indentations on the cornice edge and cut with a fine-tooth saw.

This listing is for one DIY Mitre Mate (Knauf material 00828320 / SKU 828320). Suits 55 mm, 75 mm and 90 mm cornice profiles.

Features

• Guides internal and external cornice mitres
• Suits 55 / 75 / 90 mm cove cornice
• Yellow rigid plastic — easy to see on site

This Tool

Applications

• Cutting SHEETROCK® Cove and other paper-faced cove cornice

Documents

• Plasterboard Installation Manual

Knauf DIY sandpaper is slotted 150 grit sheets sized for the DIY hand sander. Use after joint compound is fully dry; do not use coarser than the grit recommended for the finishing compound.

This listing is one 5-pack of 150 grit 305 × 85 mm sheets (Knauf material 00826244 / SKU 826244, DIYSP5).

Features

• 150 grit — general joint sanding
• 305 × 85 mm slotted sheets
• Fits Knauf DIY Hand Sander
• Convenient 5-pack

This Pack

Applications

• Sanding plasterboard joints with the DIY hand sander

Documents

• Plasterboard Installation Manual

Knauf DIY hand sander is a plastic sanding block with a high-density foam base. Clamps hold slotted sandpaper or mesh so the sheet does not slip, and the foam helps protect the wall or ceiling while sanding joints.

This listing is for one DIY hand sander (Knauf material 00817965 / SKU 817965). Use with Knauf 5-pack DIY sandpaper or Wallboard Tools small slotted sheets (85 × 305 mm).

Features

• Clamps hold sandpaper firmly
• High-density foam base — even sanding, less wall damage
• Suits DIY 5-pack sheets and small slotted WBT sheets
• Cost-effective for DIY and trade

This Tool

Applications

• Sanding plasterboard joints after joint compound has dried

Documents

• Plasterboard Installation Manual

Knauf DIY plastic broadknife is a lightweight yellow joint knife for taping coats, second coats, patching holes and spreading compounds around the home.

This listing is for one 200 mm DIY broadknife (Knauf material 00817849 / SKU 817849). Tapered blade with bevelled working edges.

Features

• Lightweight plastic — easy to handle
• Tapered design for blade flexibility
• Bevelled working edges for a smooth finish
• Yellow for easy identification on site
• Suitable for trade and DIY

This Tool

Applications

• Setting plasterboard joints
• Patching holes and spreading joint compound or cornice adhesive

Documents

• Plasterboard Installation Manual

Knauf DIY plastic broadknife is a lightweight yellow joint knife for taping coats, second coats, patching holes and spreading compounds around the home.

This listing is for one 150 mm DIY broadknife (Knauf material 00817848 / SKU 817848). Tapered blade with bevelled working edges.

Features

• Lightweight plastic — easy to handle
• Tapered design for blade flexibility
• Bevelled working edges for a smooth finish
• Yellow for easy identification on site
• Suitable for trade and DIY

This Tool

Applications

• Setting plasterboard joints
• Patching holes and spreading joint compound or cornice adhesive

Documents

• Plasterboard Installation Manual

Knauf DIY plastic broadknife is a lightweight yellow joint knife for taping coats, second coats, patching holes and spreading compounds around the home.

This listing is for one 100 mm DIY broadknife (Knauf material 00817847 / SKU 817847). Tapered blade with bevelled working edges.

Features

• Lightweight plastic — easy to handle
• Tapered design for blade flexibility
• Bevelled working edges for a smooth finish
• Yellow for easy identification on site
• Suitable for trade and DIY

This Tool

Applications

• Setting plasterboard joints
• Patching holes and spreading joint compound or cornice adhesive

Documents

• Plasterboard Installation Manual

The Knauf plastic corner tool finishes internal plasterboard corners and wall/ceiling junctions with a tapered, flexible blade.

This listing is for one DIY corner tool (Knauf material 00817854 / SKU 817854).

Features

• Tapered design for flexibility on internal corners
• Yellow plastic — easy to find on site
• Convenient and cost-effective for trade and DIY

This Tool

Applications

• Internal corners and junctions when taping and finishing plasterboard

Documents

• Plasterboard Installation Manual

Knauf Easy Tape / Supa Weave is a self-adhesive fibreglass mesh jointing tape. It applies to plasterboard without a bedding coat of compound, does not stretch or shrink, and keys well with jointing compounds for surface repairs and drywall joints.

This listing is for one 50 mm × 90 m roll (Knauf material 00820735 / catalogue 40001459).

Features

• Self-adhesive mesh — apply without compound
• Does not stretch or shrink
• Strong grip with joint compound
• Fast to apply for joints and crack / patch repairs

This Pack

Applications

• Surface repairs and reinforcing plasterboard joints
• For full-system high-strength joints Knauf recommends paper tape with BaseCote™

Documents

• Compounds and Adhesives Selector Chart
• Compounds and Adhesives Catalogue

The Rondo 315 section joiner splices 301 ceiling battens end-to-end in the KEY-LOCK® direct-fix system.

This listing is for one joiner (SKU 758445 / Knauf 00758445), 103 mm × 36 mm. Rondo pack: stock 200 / sub 100.

Features

• Suits 301 ceiling batten only
• 103 mm long × 36 mm wide
• Galvanised steel
• Stock pack 200 / sub pack 100

This Joiner

Applications

• End-to-end joining of 301 ceiling battens
• Use with 314 direct-fix clips

Documents

• Rondo KEY-LOCK® Ceiling System Design Manual

The Rondo 314 is a direct-fix clip with a positioning tab for fixing 301 ceiling battens to timber or steel — including timber I-beams. Extra nail/screw slots sit lower on the clip; tap the temporary tab to hold the clip on level so both hands are free to fasten.

This listing is for one clip (SKU 820211 / Knauf 00820211), 92 × 40 mm. Rondo pack: stock 500 / sub 100.

Features

• Positions and holds 301 battens to timber or steel
• Temporary holding tab for I-beam / joist install
• Lower extra fixing slots
• Stock pack 500 / sub pack 100

This Clip

Applications

• Direct-fix 301 battens to timber joists, I-beams or steel
• Use with 301 battens and 315 joiners

Documents

• Rondo KEY-LOCK® Ceiling System Design Manual

Rondo 301 is the 16 mm KEY-LOCK® ceiling batten for concealed direct-fix plasterboard ceilings. It is 16 mm high × 36 mm wide, 0.42 mm BMT, and is used with 314 clips and 315 joiners.

This listing is for one 6000 mm batten (SKU 817696 / Knauf 00817696). Rondo lists 4800 mm and 6000 mm.

Features

• 16 mm (H) × 36 mm (W) ceiling batten
• 0.42 mm BMT G550 / Zincalume AZ150
• Part of the KEY-LOCK® direct-fix ceiling system
• Stock pack 200 / sub pack 10

This Length

Applications

• Direct-fix plasterboard ceilings with 314 clips
• Join lengths with 315 section joiners

Documents

• Rondo KEY-LOCK® Ceiling System Design Manual

Rondo EXANGLE® P01 is a 90° external corner bead with a low-profile nib and 30 mm perforated legs so setting compound keys through for a straight, knock-resistant corner.

This listing is for one 3000 mm length (SKU 757486 / Knauf 00757486), a length Rondo lists for P01.

Features

• Perforated 30 mm legs for compound key-in
• Low-profile nib reduces compound build-up
• 0.30 mm BMT galvanised (Zincanneal) steel

This Length

Applications

• External plasterboard corners on walls
• Set in with Knauf jointing compounds

Documents

• Rondo EXANGLE® Plastering Beads Design Manual

Rondo EXANGLE® P01 is a 90° external corner bead with a low-profile nib and 30 mm perforated legs so setting compound keys through for a straight, knock-resistant corner.

This listing is for one 2700 mm length (SKU 757485 / Knauf 00757485), a length Rondo lists for P01.

Features

• Perforated 30 mm legs for compound key-in
• Low-profile nib reduces compound build-up
• 0.30 mm BMT galvanised (Zincanneal) steel

This Length

Applications

• External plasterboard corners on walls
• Set in with Knauf jointing compounds

Documents

• Rondo EXANGLE® Plastering Beads Design Manual

Rondo EXANGLE® P01 is a 90° external corner bead with a low-profile nib and 30 mm perforated legs. The wings are set at about 84° so setting compound keys through the bead, giving a straight, knock-resistant corner with less compound build-up (and less skirting / reveal kick-out).

This listing is for one 2400 mm length (SKU 823993 / Knauf 00823993). Rondo lists 2400, 2700, 3000 and 3600 mm.

Features

• Perforated 30 mm legs for compound key-in
• Low-profile nib reduces compound build-up on the corner
• 0.30 mm BMT galvanised (Zincanneal) steel
• Stock pack 480 / sub pack 20

This Length

Applications

• External plasterboard corners on walls
• Set in with Knauf jointing compounds

Documents

• Rondo EXANGLE® Plastering Beads Design Manual

Rondo EXANGLE® P40 is a 40 × 40 mm 90° internal stabilising angle for wet-area board junctions. AS 3740 requires an internal corner section at least 40 mm either side of the junction; Rondo specifies fixing P40 to timber-framed wet-area corners to at least 1800 mm above finished floor level.

This listing is for one 2400 mm length (SKU 824055 / Knauf 00824055). Rondo lists available lengths 1800 mm and 2400 mm.

Features

• 40 × 40 mm equal-leg internal stabilising angle
• 0.30 mm BMT Zincalume steel
• Supports lining-board corners in wet areas to AS 3740
• Stock pack 500 / sub pack 20

This Length

Applications

• Timber-framed wet-area internal corners (bathrooms, laundries)
• Fix to at least 1800 mm above finished floor as per Rondo / AS 3740 detail

Documents

• Rondo EXANGLE® Plastering Beads Design Manual

Rondo EXANGLE® P18 is a light-gauge 28 × 28 mm 90° internal corner angle fixed behind the lining at timber-wall intersections to strengthen the corner and reduce cracking. Knauf invoices this accessory with plasterboard orders.

This listing is for one 2400 mm length (SKU 824045 / Knauf 00824045). Rondo lists available lengths 1800 mm and 2400 mm.

Features

• 28 × 28 mm equal-leg internal angle
• 0.30 mm BMT Zincalume steel — easy to nail to timber studs
• Adds strength and helps prevent internal-corner cracking
• Stock pack 500 / sub pack 20

This Length

Applications

• Behind plasterboard at internal timber-wall junctions
• Not a wet-area 40 mm stabilising angle — use P40 where AS 3740 requires it

Documents

• Rondo EXANGLE® Plastering Beads Design Manual

FinalCote® is a premixed, air-drying, easy-sanding finishing compound for the final coat on plasterboard joints, angles and fastener heads. Use it over BaseCote® or RediBase™. It applies by hand or mechanical tools and sands readily.

This listing is for one 20 kg resealable pail (Knauf material 00747833 / SKU 747833), as listed on the FinalCote® product page.

Features

• Premium-grade semi-lightweight finishing compound
• Easy application by hand or mechanical tools
• Smooth, paint-ready surface
• Very easy to sand by hand or machine

This Pack

Applications

• Finishing coat over BaseCote™, RediBase™ or All Purpose Premix
• Joints, angles and fastener heads

Documents

• FinalCote® Product Datasheet
• FinalCote® Safety Datasheet
• Compounds and Adhesives Selector Chart
• Compounds and Adhesives Catalogue

Total Joint Finish is Knauf’s DIY all-purpose premix: an economical, air-drying lightweight compound that can be used for any or all of the three coats, or as a finish coat. The Compounds and Adhesives Catalogue specifies paper tape for jointing or patching, and a full dry between coats.

This listing is for one 4.8 kg DIY pail (Knauf material 00818631 / SKU 818631). There is no separate live PDP for this DIY SKU — copy and pack codes are from the official catalogue (2 kg / 4.8 kg / 12 kg).

Features

• May be used for any or all three coats
• Excellent workability by hand or mechanical tools
• Minimal mixing and tool clean-up; resealable pail
• Moderate sanding by hand or machine
• White / off-white paint-ready surface
• Use paper tape for jointing or patching

This Pack

Applications

• DIY jointing, patching and finishing of plasterboard
• Repairs, archways and full-room linings as described in the catalogue

Documents

• Compounds and Adhesives Selector Chart
• Compounds and Adhesives Catalogue

LiteFinish™ is a yellow-tinted, lightweight, premixed air-drying finishing compound for the final coat on plasterboard joints, angles and fastener heads. Use it over BaseCote® or RediBase™. It stays creamy, hides well, shrinks little and sands easily by hand or machine.

This listing is for one 18 kg resealable pail (Knauf material 00818566 / SKU 818566; EAN 9351065000193), as listed on the LiteFinish™ product page.

Features

• Premium-grade lightweight creamy finishing compound
• Excellent workability by hand or mechanical tools
• Yellow tint for hiding / coat identification
• Very easy to sand; smooth paint-ready surface
• Low shrinkage

This Pack

Applications

• Finishing coat over BaseCote™ or RediBase™ on joints, angles and fastener heads
• Hand or mechanical application

Documents

• LiteFinish™ Product Datasheet
• LiteFinish™ Safety Data Sheet
• Compounds and Adhesives Selector Chart
• Compounds and Adhesives Catalogue

Premium Bond™ Stud Adhesive is a water-based synthetic adhesive for bonding plasterboard to timber and metal studs on walls and ceilings. The buttery, no-slump consistency gives fast grab and good adhesive transfer.

This listing is for one 5.2 kg trade pail (Knauf material 00820819 / SKU 820819), as listed in the Compounds and Adhesives Catalogue.

Features

• Easy to use with rapid tack and a tough bond
• No-slump butter consistency
• Suitable for timber and metal studs
• Air-drying — minimum 24 hours (typically 24–48 hours)
• Green Star VOC 40 g/L (limit 50 g/L)

This Pack

Applications

• Bonding plasterboard to timber or metal wall and ceiling studs
• Use with mechanical fasteners as required by the Knauf installation manual

Documents

• Premium Bond Stud Adhesive Product Datasheet
• Premium Bond Stud Adhesive Safety Datasheet
• VOC Content Test Certificate – Premium Bond Stud Adhesive
• Compounds and Adhesives Selector Chart
• Compounds and Adhesives Catalogue

Premium Bond™ Stud Adhesive is a water-based synthetic adhesive for bonding plasterboard to timber and metal studs on walls and ceilings. The buttery, no-slump consistency gives fast grab and good adhesive transfer.

This listing is for one 1.3 kg DIY pail (Knauf material 00820817 / SKU 820817), as listed in the Compounds and Adhesives Catalogue.

Features

• Easy to use with rapid tack and a tough bond
• No-slump butter consistency
• Suitable for timber and metal studs
• Air-drying — minimum 24 hours (typically 24–48 hours)
• Green Star VOC 40 g/L (limit 50 g/L)

This Pack

Applications

• Bonding plasterboard to timber or metal wall and ceiling studs
• Use with mechanical fasteners as required by the Knauf installation manual

Documents

• Premium Bond Stud Adhesive Product Datasheet
• Premium Bond Stud Adhesive Safety Datasheet
• VOC Content Test Certificate – Premium Bond Stud Adhesive
• Compounds and Adhesives Selector Chart
• Compounds and Adhesives Catalogue

Knauf DIY Patching Plaster is a soft, plaster-based setting compound for filling cracks and patching holes in plasterboard walls and ceilings quickly and without fuss. It is compatible with normal paint finishes.

This listing is for one 1.5 kg resealable pail (Knauf material 00818585 / SKU 818585), as listed on the Patching Plaster product page (EAN 9351065000087).

Features

• Soft and easy to use
• Plaster-based setting compound
• Compatible with any paint finishes
• Resealable DIY pail

This Pack

Applications

• Filling cracks and patching holes in plasterboard walls and ceilings
• Not a substitute for a full three-coat jointing system on new linings

Documents

• Compounds and Adhesives Selector Chart
• Compounds and Adhesives Catalogue

Knauf Cornice Adhesive is a plaster-based setting compound for bonding paper-faced and plaster cornices to plasterboard and masonry, and for reinforcing cornice joints. The Compounds and Adhesives Catalogue lists the DIY 3 kg pail as Cornice Adhesive 45 in a smaller pack.

This listing is for one 3 kg DIY pail (Knauf material 00747816 / SKU 747816). The 3 kg DIY size is in the catalogue; the live Cornice Adhesive variants table currently shows 10 kg and 20 kg bags.

Features

• Same Cornice Adhesive 45 chemistry in a DIY pail
• Mixes easily; excellent wet tack and adhesion
• Approximately 45-minute set
• Also suitable for small decorative plaster fixings and joint reinforcing

This Pack

Applications

• DIY cornice installation and joint reinforcing
• Small decorative plaster fixings

Documents

• Cornice Adhesive 45, 60 and 90 Product Datasheet
• Cornice Adhesive Safety Data Sheet
• VOC Content Test Certificate – Cornice Adhesive
• Compounds and Adhesives Selector Chart
• Compounds and Adhesives Catalogue

Knauf Cornice Adhesive is a plaster-based setting compound for bonding paper-faced and plaster cornices to plasterboard (and masonry), and for reinforcing cornice joints. It can also fix other plaster decorative products, back-block joints and laminate plasterboard sheets.

This listing is for one 20 kg bag of Cornice Adhesive 45 (Knauf material 00747812 / SKU 747812), as listed on the Cornice Adhesive product page.

Features

• Mixes easily to a creamy, lump-free gauge
• Excellent wet tack, adhesion and water retention
• 45-minute set (also available as 60 and 90 minute grades)
• Yellow pigmentation for easy identification
• VOC less than 8 g/L

This Pack

Applications

• Bonding SHEETROCK® Cove and other paper-faced or plaster cornices
• Reinforcing cornice joints; back-blocking and laminating plasterboard
• Use temporary nails or screws on long or heavy lengths until the adhesive has set

Documents

• Cornice Adhesive 45, 60 and 90 Product Datasheet
• Cornice Adhesive Safety Data Sheet
• VOC Content Test Certificate – Cornice Adhesive
• Compounds and Adhesives Selector Chart
• Compounds and Adhesives Catalogue

BaseCote™ is a plaster-based setting compound for taping and basecoating plasterboard joints, angles and fastener heads — including SHEETROCK® plasterboard and FIBEROCK®. The reformulated mix is smoother and creamier, so it trowels and scrapes back more easily.

This listing is for one 20 kg bag of BaseCote™ 45 (Knauf material 00747820 / SKU 747820) with a 45-minute set, as listed on the BaseCote™ 45 product page.

Features

• Consistent, reliable 45-minute working time
• Stable gauge that resists seeding
• Flows smoothly under the trowel and from mechanical tools
• Smoother finish with less pocking and pin holes
• Scrapes back easily; mixes quickly to a lump-free gauge

This Pack

Applications

• First and second coats on plasterboard joints, angles and fastener heads
• Use with paper tape; finish with LiteFinish™, FinalCote® or Total Joint Finish

Documents

• BaseCote™ Product Datasheet
• BaseCote™ Safety Datasheet
• Compounds and Adhesives Selector Chart
• Compounds and Adhesives Catalogue

SHEETROCK® Cove uses a high strength-to-weight composite core inside a 100% recycled paper liner, so the cornice stays rigid and is easy to carry, cut, mitre and install.

This listing is for one 75 mm × 4800 mm cove length (Knauf material 00817867 / SKU 817867), as listed on the SHEETROCK® Cove Cornice 75 product page.

Features

• Lightweight, high strength-to-weight composite design
• Rigid profile for easier handling and installation
• Easy to cut, mitre and clean up
• Consistent 75 mm cove profile with clean lines
• Paper-faced — ready for decoration

This Length

Applications

• Wall-to-ceiling junctions in residential interiors
• Bond with Knauf Cornice Adhesive to plasterboard

Documents

• SHEETROCK® Plasterboard and Cornice Safety Datasheet
• Gypsum Board Catalogue
• Plasterboard Installation Manual

SHEETROCK® PLUS is Knauf’s premium 10 mm performance plasterboard for the rooms that work hardest in a home. One board covers wet areas, acoustic walls and high-traffic spaces — water resistance, sound insulation and impact protection in a single lining.

The water-resistant, fibreglass-reinforced core is built for bathrooms, kitchens and laundries, and the extra mass helps cut noise between rooms. Hard-body impact testing shows a much smaller and shallower dent than 10 mm SHEETROCK® ONE. This listing is for one 10 mm × 1200 mm × 3000 mm recessed-edge sheet (Knauf material 00885869 / SKU 885869).

Features

• Water-resistant core — exceeds AS/NZS 2588:2018 wet-area plasterboard requirements
• Meets NCC / AS 3740:2021 deemed-to-comply wet-area details when installed to Knauf specifications
• High acoustic performance in Knauf PartiWall and other acoustic systems
• Fibreglass-reinforced, denser core for improved impact resistance
• Tile-ready surface up to 32 kg/m²
• Internal walls and ceilings, including protected garage and alfresco ceilings in non-cyclonic regions
• GECA certified, Climate Active Opt-In (carbon neutral), Product Aware listed, independently verified EPD
• Low VOC — less than 0.5 mg/m³ TVOC

This Sheet

Applications

• Bathrooms, laundries, kitchens and other wet areas
• Media rooms, home offices and intertenancy / separating walls
• High-traffic residential corridors and hallways
• Private houses, multi-residential and commercial interiors
• Not for fire-rated applications unless a Knauf fire system specifies this board

Documents

• SHEETROCK® PLUS Product Datasheet
• Gypsum Board Catalogue
• Plasterboard Installation Manual
• SHEETROCK® PLUS Safety Datasheet

SHEETROCK® ONE is Knauf’s lightweight two-in-one plasterboard for residential walls and ceilings. It uses a patented core formulation inside a strong 100% recycled paper liner, giving a high strength-to-weight ratio that is easy to score, snap, carry and hang.

This listing is for one 10 mm × 1350 mm × 3600 mm recessed-edge sheet (Knauf material 00818617 / SKU 818617), as listed on the SHEETROCK® ONE 10 mm product page. Use it for general internal walls and ceilings where fire-resistance ratings, impact resistance or water resistance are not required.

Features

• Lightweight — easy to install and handle
• Superior sag resistance for ceiling work
• Easy score and snap
• Suitable for internal wall and ceiling applications
• Ivory recycled-paper face, ready for decorative finishes
• Manufactured in Australia to AS/NZS 2588:2018
• GECA certified with an independently verified EPD

This Sheet

Applications

• Residential internal walls and ceilings
• Alfresco and garage areas where fire, impact and water resistance are not required
• Not for fire-rated systems, wet areas, or high-impact zones — use SHEETROCK® PLUS or a performance board instead

Documents

• SHEETROCK® ONE Product Datasheet
• Gypsum Board Catalogue
• Plasterboard Installation Manual
• Lighting and Decorating Plasterboard Guide
• SHEETROCK® Plasterboard and Cornice Safety Datasheet
• Knauf Gypsum Plasterboard EPD – SHEETROCK® ONE
• VOC Test Certificate – SHEETROCK® Plasterboard and Cornice

SHEETROCK® ONE is Knauf’s lightweight two-in-one plasterboard for residential walls and ceilings. It uses a patented core formulation inside a strong 100% recycled paper liner, giving a high strength-to-weight ratio that is easy to score, snap, carry and hang.

This listing is for one 10 mm × 1200 mm × 2400 mm recessed-edge sheet (Knauf material 00818606 / SKU 818606). Use it for general internal walls and ceilings where fire-resistance ratings, impact resistance or water resistance are not required.

Features

• Lightweight — easy to install and handle
• Superior sag resistance for ceiling work
• Easy score and snap
• Suitable for internal wall and ceiling applications
• Ivory recycled-paper face, ready for decorative finishes
• Manufactured in Australia to AS/NZS 2588:2018
• GECA certified with an independently verified EPD

This Sheet

Applications

• Residential internal walls and ceilings
• Alfresco and garage areas where fire, impact and water resistance are not required
• Not for fire-rated systems, wet areas, or high-impact zones — use SHEETROCK® PLUS or a performance board instead

Documents

• SHEETROCK® ONE Product Datasheet
• Gypsum Board Catalogue
• Plasterboard Installation Manual
• Lighting and Decorating Plasterboard Guide
• SHEETROCK® Plasterboard and Cornice Safety Datasheet
• Knauf Gypsum Plasterboard EPD – SHEETROCK® ONE
• VOC Test Certificate – SHEETROCK® Plasterboard and Cornice