Paslode Nailers & FastenersFast, Reliable Fixing For Framing, Flooring And Finishing

Paslode 25 x 1.6mm C25 zinc plated impulse brads in a 3000-pack with fuel cell. 16-gauge galvanised brad nails for interior finishing, trim and light fixing with Paslode Impulse brad nailers.

Features

• Zinc plated / galvanised finish
• 16 gauge brad
• C-series collation
• 3000 brads per pack
• Includes fuel cell

Specifications

The updated Paslode CoilMaster is a cordless Impulse coil nailer with smoother feed, fewer jams and easier handling on site. It drives 27–50mm coil nails without a hose or compressor, and a Li-ion charge is rated at about 4,500 shots.

Features

• Revised feed-piston lubrication for more reliable nail feed
• Updated lockout parts to lower the chance of jams
• Clearer access if a nail jam does occur
• Cordless Impulse operation — no compressor or hose
• About 4,500 shots per Li-ion charge
• 27–50mm coil nails for cladding, fibre cement, plywood, ply bracing, eaves and soffits, fencing, unpunched metal connectors, strap bracing, decking and cement-tile underlay
• Kit: CoilMaster nailer, 2 Li-ion batteries, charger kit, safety glasses and 2 Allen keys

Specifications

The Paslode Impulse Straight TrimMaster is a compact cordless bradder that runs 16G C brads, 15G steel-frame brads and 14G ND brads by swapping the nose plate. It is built for trim and fibre-cement work without a hose or compressor.

Features

• Swap-n-lock nose plate to change between 16G (C) and 14G (ND)
• Also drives 15G steel-frame brads
• Driver blade and firing pin set up for fibre-cement cladding
• Revised battery position and thumbwheel depth-of-drive
• Updated engine and internal parts for longer service life
• New body and rubber grip with lower vibration
• Kit: TrimMaster 14/16G straight nailer, 2 × 7.4V Li-ion batteries, charger kit, safety glasses and 1 Allen key

Specifications

Paslode Impulse FrameMaster-Li PowerVent cordless gas framing nailer kit. This 7.4V lithium-ion battery nailer drives 50-90mm framing nails from 2.8-3.15mm diameter and is supplied as a kit with two batteries, charger, tools and case.

Features

• Cordless 7.4V lithium-ion gas framing nailer
• Drives 50-90mm nails, 2.8-3.15mm diameter
• Up to 6,000 nails per charge
• 2-minute quick charge drives up to 200 nails
• Includes two 2.2Ah batteries, charger, allen key, safety glasses and case

Specifications

The Paslode T250 C Series is a pneumatic 16-gauge straight bradder that drives 1.6mm C Series brads from 19mm to 65mm. It features an oil-free maintenance-free design and is suited to architraves, skirting, panelling, mouldings and stair rails.

Features

• Suits 1.6mm (16ga) C Series straight brads 19-65mm
• Oil-free maintenance-free operation
• Rear exhaust vents air away from user
• Selectable bump fire or sequential trigger
• Adjustable depth of drive
• Reversible belt hook and nail lock-out

Specifications

Paslode Impulse TrimMaster 16 gauge Angled Bradder kit, a cordless gas nail gun for driving 16 gauge angled brads. Powered by 7.4V lithium-ion batteries and a fuel cell for cord-free and hose-free finishing and trim work.

Features

• Drives 16 gauge angled brads
• Cordless gas impulse operation
• 2 x 7.4V lithium-ion batteries
• Angled magazine for access to tight corners
• Supplied as a kit

Specifications