Plaster

FinalCote® is a premixed, air-drying, easy-sanding finishing compound for the final coat on plasterboard joints, angles and fastener heads. Use it over BaseCote® or RediBase™. It applies by hand or mechanical tools and sands readily.

This listing is for one 20 kg resealable pail (Knauf material 00747833 / SKU 747833), as listed on the FinalCote® product page.

Features

• Premium-grade semi-lightweight finishing compound
• Easy application by hand or mechanical tools
• Smooth, paint-ready surface
• Very easy to sand by hand or machine

This Pack

Applications

• Finishing coat over BaseCote™, RediBase™ or All Purpose Premix
• Joints, angles and fastener heads

Documents

• FinalCote® Product Datasheet
• FinalCote® Safety Datasheet
• Compounds and Adhesives Selector Chart
• Compounds and Adhesives Catalogue

Total Joint Finish is Knauf’s DIY all-purpose premix: an economical, air-drying lightweight compound that can be used for any or all of the three coats, or as a finish coat. The Compounds and Adhesives Catalogue specifies paper tape for jointing or patching, and a full dry between coats.

This listing is for one 4.8 kg DIY pail (Knauf material 00818631 / SKU 818631). There is no separate live PDP for this DIY SKU — copy and pack codes are from the official catalogue (2 kg / 4.8 kg / 12 kg).

Features

• May be used for any or all three coats
• Excellent workability by hand or mechanical tools
• Minimal mixing and tool clean-up; resealable pail
• Moderate sanding by hand or machine
• White / off-white paint-ready surface
• Use paper tape for jointing or patching

This Pack

Applications

• DIY jointing, patching and finishing of plasterboard
• Repairs, archways and full-room linings as described in the catalogue

Documents

• Compounds and Adhesives Selector Chart
• Compounds and Adhesives Catalogue

LiteFinish™ is a yellow-tinted, lightweight, premixed air-drying finishing compound for the final coat on plasterboard joints, angles and fastener heads. Use it over BaseCote® or RediBase™. It stays creamy, hides well, shrinks little and sands easily by hand or machine.

This listing is for one 18 kg resealable pail (Knauf material 00818566 / SKU 818566; EAN 9351065000193), as listed on the LiteFinish™ product page.

Features

• Premium-grade lightweight creamy finishing compound
• Excellent workability by hand or mechanical tools
• Yellow tint for hiding / coat identification
• Very easy to sand; smooth paint-ready surface
• Low shrinkage

This Pack

Applications

• Finishing coat over BaseCote™ or RediBase™ on joints, angles and fastener heads
• Hand or mechanical application

Documents

• LiteFinish™ Product Datasheet
• LiteFinish™ Safety Data Sheet
• Compounds and Adhesives Selector Chart
• Compounds and Adhesives Catalogue

Knauf DIY Patching Plaster is a soft, plaster-based setting compound for filling cracks and patching holes in plasterboard walls and ceilings quickly and without fuss. It is compatible with normal paint finishes.

This listing is for one 1.5 kg resealable pail (Knauf material 00818585 / SKU 818585), as listed on the Patching Plaster product page (EAN 9351065000087).

Features

• Soft and easy to use
• Plaster-based setting compound
• Compatible with any paint finishes
• Resealable DIY pail

This Pack

Applications

• Filling cracks and patching holes in plasterboard walls and ceilings
• Not a substitute for a full three-coat jointing system on new linings

Documents

• Compounds and Adhesives Selector Chart
• Compounds and Adhesives Catalogue

BaseCote™ is a plaster-based setting compound for taping and basecoating plasterboard joints, angles and fastener heads — including SHEETROCK® plasterboard and FIBEROCK®. The reformulated mix is smoother and creamier, so it trowels and scrapes back more easily.

This listing is for one 20 kg bag of BaseCote™ 45 (Knauf material 00747820 / SKU 747820) with a 45-minute set, as listed on the BaseCote™ 45 product page.

Features

• Consistent, reliable 45-minute working time
• Stable gauge that resists seeding
• Flows smoothly under the trowel and from mechanical tools
• Smoother finish with less pocking and pin holes
• Scrapes back easily; mixes quickly to a lump-free gauge

This Pack

Applications

• First and second coats on plasterboard joints, angles and fastener heads
• Use with paper tape; finish with LiteFinish™, FinalCote® or Total Joint Finish

Documents

• BaseCote™ Product Datasheet
• BaseCote™ Safety Datasheet
• Compounds and Adhesives Selector Chart
• Compounds and Adhesives Catalogue