Wallboard

280mm texture float, cream medium hard ABS plastic blade for finishing top coat renders

Features:

• Cream bladed plastic texture float
• Blade thickness 3mm
• Grain size 2-3mm

Wallboards economical chisel point Staples suit most staple guns

Features:

• Wallboard range of staples are designed to fit the Wallboard Professional Staple Gun
• Available in 8mm and 10mm
• Also fits Rapid 14 and 34 staple guns or the Arrow Code T-50 and Code T-55 guns
• Available in 2000 pack quantity

Wallboards economical chisel point Staples suit most staple guns

Features:

• Wallboard range of staples are designed to fit the Wallboard Professional Staple Gun
• Available in 8mm and 10mm
• Also fits Rapid 14 and 34 staple guns or the Arrow Code T-50 and Code T-55 guns
• Available in 2000 pack quantity

Wallboards traditional 10 point Cornice Saw is ideal for cutting plaster cornice.

Features:

• Designed for cutting ornamental cornice through a large mitre box
• 10 point hardened teeth
• Available with 550mm, 650mm or 800mm blade

The V-4 Corner Tool is designed to bed joint tape into the internal angle and feather the edges out to 50mm.

Features:

• Flexible Stainless steel design
• Feathers compound out to 50mm
• Comfortable contoured wooden handle
• Solid aluminum blade mounting

With new technology ceramic grain, the mesh pad lasts significantly longer than traditional paper sanding pads and continues to stay sharp during prolonged use. It has minimal clogging, is dustless when attached to the vacuum, and suitable for sanding on a variety of surfaces. The Ceramic Mesh also has a tough tear resistance, easy alignment (no designated hole pattern) and a high grip hook and loop.

Features:

• Ceramic abrasive grain is self sharpening = stays sharper for longer
• Hundreds of holes = reduced clogging
• Ceramic Pads + quality vacuum = dustless sanding
• Sharper grains = faster material removal
• Reduced sanding pressure required for a quality finish
• Outlasts traditional paper faced sanding pads
• Easy alignment (no designated hole pattern)
• Creates less heat than traditional aluminium oxide abrasives
• Suitable for use on plasterboard, paint and wood surfaces
• Our most premium and economical sanding solution yet!
• Grit range from 80g-240g
• Available in 10 and 25 packs
• Also available in 150mm and 125mm disc size

With new technology ceramic grain, the mesh pad lasts significantly longer than traditional paper sanding pads and continues to stay sharp during prolonged use. It has minimal clogging, is dustless when attached to the vacuum, and suitable for sanding on a variety of surfaces. The Ceramic Mesh also has a tough tear resistance, easy alignment (no designated hole pattern) and a high grip hook and loop.

Features:

• Ceramic abrasive grain is self sharpening = stays sharper for longer
• Hundreds of holes = reduced clogging
• Ceramic Pads + quality vacuum = dustless sanding
• Sharper grains = faster material removal
• Reduced sanding pressure required for a quality finish
• Outlasts traditional paper faced sanding pads
• Easy alignment (no designated hole pattern)
• Creates less heat than traditional aluminium oxide abrasives
• Suitable for use on plasterboard, paint and wood surfaces
• Our most premium and economical sanding solution yet!
• Grit range from 80g-240g
• Available in 10 and 25 packs
• Also available in 150mm and 125mm disc size

Ultraflex from No-Coat is the Structural Laminate Drywall Corner System designed to deliver superior strength, durability and flexibility with faster installation times. Ultraflex is ideal for finishing off-angles, outside corners, gapped sheets and soffits.

Features:

• Ultraflex 325 is 82mm wide x 30.5m roll designed for domestic use
• Ultraflex 450 is 115mm wide x 30.5m roll suiting larger commercial applications
• Tapered high strength co-polymer core withstands severe impacts
• Joint tape surface for great adhesion
• Formulated surface paper resists abrasion and accepts most finishes
• Requires less mud than most trims
• Can be installed quick with No-Coat tools

Wallboard's trade quality Ply Mitre Box makes cutting 45 and 135 degree angles in most standard size cornice simple.

Features:

• Made from construction grade plywood
• Dual cutting at 45 degrees and 67.5 degrees
• Sides and base are both 20mm thick and glued together for added strength
• Steps in base accomodates 55mm, 75mm and 90mm cornice
• Cuts are not full depth to maintain strength while box is in transit

Specially designed for mixing plaster compound and cornice cements.

Features:

• 10 litre capacity
• Sturdy oblong shape
• Easy to clean

The ideal tool for applying stud adhesive with the least amount of wastage and mess. Comes with a moulded Pro-Grip handle for comfort.

Features:

• Long 200mm blade
• Easy clean stainless steel
• Moulded Pro-Grip Handle

Wallboard's popular all steel design floor scraper is great for cleaning plaster from concrete floors.

Features:

• 1520mm tubular steel pole
• Replacement blades available
• Rubber hand grip
• Heavy duty floor cleaner
• Blade is heat treated for added strength

This professional Plasterers Hawk is made from durable aluminium and is designed for holding and carrying plaster while applying.

Features:

• Lightweight but durable
• Radius corners for safety
• Rigid 2mm aluminium plate
• Comfortable rubber handle
• Rubber donut that reduces fatigue on the hand
• Available in 300x300mm (DH-40) and 325x325mm (DH-50)

This professional Plasterers Hawk is made from durable aluminium and is designed for holding and carrying plaster while applying.

Features:

• Lightweight but durable
• Radius corners for safety
• Rigid 2mm aluminium plate
• Comfortable rubber handle
• Rubber donut that reduces fatigue on the hand
• Available in 300x300mm (DH-40) and 325x325mm (DH-50)

This Dual Angled, Dual Grit Sanding Block from Wallpro is designed to last, with radius edges to reduce scratching of adjacent surfaces.

Features:

• Dual angled design helps sand into corners
• Radius edge reduces scratching plasterboard surface
• Fine/Medium grit
• 125mm x 70mm x 26mm block size
• Rinses in water
• Carton contains 100 blocks

The Wallboard Blitza Mixer is made from heavy duty stainless steel and has an original design that draws material quickly. The round edges of the blade will protect the mixing bucket from damage. This mixer will mix a variety of different compounds.

Features:

• Fixed blade
• Easy to clean
• Stainless steel
• Less bucket spin
• Draws material quickly - original design
• Round edges protect bucket from damage
• Shape of mixer allows to stand on own and with drill
• Available with M14 Thread (9108) to fit power mixers

This Wallboard Tools self adhesive Fibreglass Joint Tape can be applied to a join prior to adding compound reducing overall drying time.

Features:

• Self adhesive
• Applies without compound
• Great for plaster joints and repairs
• Elliminates air bubbles
• Quick to apply
• Available in rolls of 50mm x 20m and 50mm x 90m

Wallboard's Calibrated T Square is an accurate and durable tool designed for the process of measuring and cutting board. The new 9027/28 T-Squares feature a protective black/orange enamel paint finish that makes the calibrations easier to read.

Features:

• Blade printed with easy to see metric measurements in 2mm increments
• Protective black/orange enamel paint finish with stainless steel rivets
• Reverse ruled for quick measurement in both directions
• Head of T Square has a flange to provide added strength and will run along edge of sheeting
• Supplied in 2 sizes - 1200mm and 1350mm

Wallboard's Calibrated T Square is an accurate and durable tool designed for the process of measuring and cutting board. The new 9027/28 T-Squares feature a protective black/orange enamel paint finish that makes the calibrations easier to read.

Features:

• Blade printed with easy to see metric measurements in 2mm increments
• Protective black/orange enamel paint finish with stainless steel rivets
• Reverse ruled for quick measurement in both directions
• Head of T Square has a flange to provide added strength and will run along edge of sheeting
• Supplied in 2 sizes - 1200mm and 1350mm

Trim-Tex 847AU Spray Adhesive is developed from real trade feedback, with Trim-Tex engineers re-engineering and refining the formula specifically for the Australian market. It delivers faster tack, improved spray control and an optimised cure time for consistent, high-performance results on site.

Features:

• 500ml size bottle
• Updated spray nozzle for a controlled, even spray pattern
• Faster setting time allowing accurate placement without slowing the job
• Superior Tack and bond strength
• For use on PVC and metal trims
• Optimised for trade use with a single-spray application
• Low-VOC, toluene-free for a safer worksite
• Will not bleed through taping compound or paint

Adjustable Inside Corner Beads produce straight and sharp inside lines and adjusts between 70 degrees-150 degrees

Features:

• Adjusts from a 70 degrees inside corner to a 150 degrees inside corner
• 2.5mm nib
• 25mm mud legs
• Not suitable for areas subject to structural movement
• Flexible and impact resistant
• 3.0m lengths
• 70 piece carton

Archway Corner Bead is the ideal tool for finishing archways and other free flowing curved forms. For ease of installation, Trim-Tex 72-847 Spray Adhesive should be used to adhere arch tabs to the plasterboard.

Features:

• Engineered arch tabs allow you to go from 250mm inside radius to a 450mm outside radius
• Made of non-corrosive and impact resistant PVC
• Lightweight but robust
• 50 piece carton
• Available in 3.0m length

Trim-Tex Corner Bead creates a rust proof and dent resistant corner, simply fasten to the plasterboard and you are ready for setting.

Features:

• Made of impact resistant rigid vinyl
• The intricate pattern of holes allows mud to penetrate through the bead and adhere to the plasterboard
• The bead becomes part of the wall
• Easy to use
• 50 pieces per carton
• Available in 2.4 and 3.0m lengths

The Wallboard Tools Bucket Scoop is designed to completely remove compound from mixing buckets.

Features:

• Comfortable rubber grip handle
• Stainless steel curved blade
• 165mm scoop size
• Efficiently removes plaster from bucket

This handy multi functional plasterers tool has a combination of edges to be used for a variety of uses on the job site. It has a hammer head for setting screws and nails. The scraper blade is great for removing putty and grout, and it can be used to scrape plaster and paint from externals or opening tins.

Features:

• Scraper blade for cleaning surfaces easily
• Remove nails using the hole in the blade
• Hammer head to set nails and screws
• Combination of edges removes putty
• 75mm stainless steel blade

Wallboard's favourite "Sub Zero" professional cutting blades in a handy 10 pack dispenser.

Features:

• High carbon SK2 steel
• Sub-Zero tempering
• Improved flexibility
• Increased lifespan

REFINA diamond faced floats are super durable traditional shaped floats featuring a diamond shaped pattern that helps to float up backing coat plasters and OCR render systems. Manufactured with a chunky easy-grip handle, REFINA diamond faced floats are tried and tested throughout the rendering trade.

Features:

• Hard-wearing
• Durable thick ABS plastic
• Chunky easy-grip handle
• Diamond pattern helps the float glide across the surface
• Ideal for floating up backing coat plasters
• Perfectly suited for OCR and sand and cement renders

REFINA diamond faced floats are super durable traditional shaped floats featuring a diamond shaped pattern that helps to float up backing coat plasters and OCR render systems. Manufactured with a chunky easy-grip handle, REFINA diamond faced floats are tried and tested throughout the rendering trade.

Features:

• Hard-wearing
• Durable thick ABS plastic
• Chunky easy-grip handle
• Diamond pattern helps the float glide across the surface
• Ideal for floating up backing coat plasters
• Perfectly suited for OCR and sand and cement renders

REFINA diamond faced floats are super durable traditional shaped floats featuring a diamond shaped pattern that helps to float up backing coat plasters and OCR render systems. Manufactured with a chunky easy-grip handle, REFINA diamond faced floats are tried and tested throughout the rendering trade.

Features:

• Hard-wearing
• Durable thick ABS plastic
• Chunky easy-grip handle
• Diamond pattern helps the float glide across the surface
• Ideal for floating up backing coat plasters
• Perfectly suited for OCR and sand and cement renders

Wallboard's traditional, heavy duty "Fibro" cutters

Features:

• Cuts cement sheet up to 10mm
• Soft rubber grip handles
• 550mm long
• Rust resistant paint finish

REFINA aluminium I-beam profile scrapers are lightweight hand tools that are designed for effectively scraping back a variety of materials such as monocouche, polymer and other through-colour render systems. Manufactured with durability in mind, REFINA aluminium scrapers are high-quality, long lasting and will help to improve the flatness, uniformity and preserve the colour of a rendered surface thanks to their unique non-marking factory finish.

Features:

• Lightweight
• Durable aluminium
• Designed for scraping back polymer and through-coloured renders
• Improves flatness throughout the surface
• Ensures uniformity of material
• Ideal for any render application specialist

Heavy duty hard wearing score and snap knife designed for cutting cement sheet.

Features:

• Two carbide scoring edges
• Comfortable pipe style handle
• Robust metal design

280mm texture float, clear plastic smooth blade for finishing white cement finishes and special renders

Features:

• Clear bladed plastic texture float
• Blade thickness 3mm

REFINA texture floats are ideal hand tools used for finishing silicone thin coat render systems that vary between grain size and application thickness. These plastic trowels feature a 3mm ABS plastic blade that is suitable for 1-3mm aggregate sizes and help to achieve a professional finish with minimal drag lines thanks to their bevelled edges.

Features:

• 3mm gauge ABS plastic blade
• Textured face for even distribution of aggregate across the surface
• Comfortable soft grip handle
• Suitable for finishing silicone thin coat render systems
• Ideal for working with 1-2mm render grain installations
• Helps to finish render with minimal drag lines

REFINA texture floats are ideal hand tools used for finishing silicone thin coat render systems that vary between grain size and application thickness. These plastic trowels feature a 2mm ABS plastic blade that is suitable for 3-4mm aggregate sizes and help to achieve a professional finish with minimal drag lines thanks to their bevelled edges.

Features:

• 2mm gauge ABS plastic blade
• Textured face for even distribution of aggregate across the surface
• Comfortable soft grip handle
• Suitable for finishing silicone thin coat render systems
• Ideal for working with 3-4mm render grain installations
• Helps to finish render with minimal drag lines

This sponge float comes with a super absorbent cellulose sponge for cleaning of tiles after grouting. This sponge float should be stored in a poly bag to prevent drying out.

Features:

• 280mm sponge float with 25mm yellow cellulose sponge
• Supplied in a sealed plastic bag
• Soft grip handle
• Recycled one piece plastic float

The REFINA comb scarifier is a lightweight hand tool that's ideal for scoring base coats and backing plasters. Featuring semi-flexible stainless steel prongs that can be dragged along backing coats to provide an effective key.

Features:

• Stainless steel, semi-flexible tines
• Lightweight aluminium bracket
• Soft grip handle

The FINATEX 2 is produced with a rose gold stainless steel blade which is slightly wider and thinner blade than the original FINATEX giving a more flexible feel

Features:

• FINATEX 2 rose gold plastering trowel
• Slightly thinner blade giving more flexibility
• Super flat plastering trowel
• The straightest finishing edge
• Slightly radiused corners
• Machine chamfered side edges
• Chrome stainless steel, rust free
• Pre-worn in ready for use on finish plasters
• Guaranteed one year for trade use
• Made in Germany
• Sizes: 305x125mm, 355x125mm, 450x125mm

The FINATEX 2 is produced with a rose gold stainless steel blade which is slightly wider and thinner blade than the original FINATEX giving a more flexible feel

Features:

• FINATEX 2 rose gold plastering trowel
• Slightly thinner blade giving more flexibility
• Super flat plastering trowel
• The straightest finishing edge
• Slightly radiused corners
• Machine chamfered side edges
• Chrome stainless steel, rust free
• Pre-worn in ready for use on finish plasters
• Guaranteed one year for trade use
• Made in Germany
• Sizes: 305x125mm, 355x125mm, 450x125mm

The FINATEX 2 is produced with a rose gold stainless steel blade which is slightly wider and thinner blade than the original FINATEX giving a more flexible feel

Features:

• FINATEX 2 rose gold plastering trowel
• Slightly thinner blade giving more flexibility
• Super flat plastering trowel
• The straightest finishing edge
• Slightly radiused corners
• Machine chamfered side edges
• Chrome stainless steel, rust free
• Pre-worn in ready for use on finish plasters
• Guaranteed one year for trade use
• Made in Germany
• Sizes: 305x125mm, 355x125mm, 450x125mm

These lightweight trowels are made from the finest and flattest chrome stainless steel for rust free use. They are manufactured using the most modern production techniques, mechanically broken in and hand finished to ensure the finest trade quality laying on trowels The soft blue composite handle is comfortable on the hand, easy to grip and reduces muscle and joint strain

Features:

• Premium plaster trowels
• Hand finished premium trowel blade
• Super flat plastering trowel
• Stainless steel 0.65mm blade
• Straight finishing edge
• Slightly radiused corners
• Machine chamfered side edges
• Chrome stainless steel, rust free
• Produced with soft composite handle
• Made in Germany
• Width 4 3/4"

These lightweight trowels are made from the finest and flattest chrome stainless steel for rust free use. They are manufactured using the most modern production techniques, mechanically broken in and hand finished to ensure the finest trade quality laying on trowels The soft blue composite handle is comfortable on the hand, easy to grip and reduces muscle and joint strain

Features:

• Premium plaster trowels
• Hand finished premium trowel blade
• Super flat plastering trowel
• Stainless steel 0.65mm blade
• Straight finishing edge
• Slightly radiused corners
• Machine chamfered side edges
• Chrome stainless steel, rust free
• Produced with soft composite handle
• Made in Germany
• Width 4 3/4"

FibaFuse is a glass mat, plasterboard tape. Its open fibre structure allows compound to penetrate the tape creating a stronger bond thereby reducing the incidence of "loose tape" and air bubbles. The tape can be installed by hand or runs well through Automatic Tools (Automatic Taper/Mud Box).

Features:

• Suitable for hand and machine taping
• Open fibre design and crack resistant
• Smooth, flawless finish
• Available in 50mm, 150mm and 914mm widths
• Wider rolls are perfect for patching and wall repairs