6/NO.12 x 35 TYPE17 SCREWS + 2/WOOD SCREWS LVSIASK

Fasteners

• 6 / No.12 × 35 Type 17 screws: Six 12-gauge, 35mm structural timber connector screws with a Type 17 auger point. The point cuts a clean pilot thread into the timber to reduce splitting near the edges. These are usually heavily galvanised hex-head screws, driven horizontally through the 50mm vertical flange of the bracket into the face of the main supporting girder beam.
• 2 / wood screws: Two flat, countersunk wood screws, driven vertically upward through the pre-punched holes in the 75mm horizontal seat flange into the underside of the incoming skewed truss or joist to lock it down against wind uplift.

LVSIASK

LVSIASK is the Long Variable Skew Angle Seat Kit. The bracket acts as a heavy-duty engineered seat or ledge, supporting a timber member from underneath and removing the need for a traditional face-mount hanger.

Key Installation Requirements

• Timber splitting: When fixing into seasoned hardwood or high-density laminated veneer lumber (LVL), pre-drill pilot holes so the screw heads are less likely to shear during installation.
• Distance compliance: Keep a minimum 30mm edge distance and a 60mm end distance on all timber members for structural compliance at frame inspection.