Monkey Grip Marine Ratchet Tie Down 400kg 25mm x 4m 304 Stainless Steel Single MATD254-1

This listing is 4m - Single (1 Ratchet).

Saltwater destroys standard tie-down straps, causing rusting, seizing, and weakening over time. Monkey Grip’s 400kg-rated Marine Tie Downs are built with 304 stainless steel hardware to stay reliable in wet, salty environments.

🔸400kg rated capacity for maximum holding strength 🔸304 stainless steel hardware for corrosion resistance 🔸Ideal for boats, jet skis, kayaks, and marine trailers 🔸Available in 2m or 4m lengths 🔸Built tough for repeated use

Built strong with durable 25mm webbing and stainless steel hardware, our tie downs deliver dependable holding power for real-world marine transport. The 400kg rated capacity gives you the confidence to secure boats, jet skis, and marine equipment for short trips to the ramp or long highway tows.

Designed to resist stretching and load movement, it helps keep your marine craft locked in place from start to finish.

Monkey Grip Marine Ratchet Tie Downs are built to perform in wet, salty, and demanding environments. The marine-grade stainless steel ratchet mechanism resists corrosion and rust, making these tie downs well suited to regular exposure to moisture and harsh coastal conditions.

Available in 2m or 4m to suit different loads and anchor points. Shorter for compact setups, longer for wider loads and trailers.

Features

Reliable Marine Tie Downs

• Built strong with durable 25mm webbing and stainless steel hardware, our tie downs deliver dependable holding power for real-world marine transport. The 400kg rated capacity gives you the confidence to secure boats, jet skis, and marine equipment for short trips to the ramp or long highway tows.
• Designed to resist stretching and load movement, it helps keep your marine craft locked in place from start to finish.

Designed for Australian Waters

• Monkey Grip Marine Ratchet Tie Downs are built to perform in wet, salty, and demanding environments. The marine-grade stainless steel ratchet mechanism resists corrosion and rust, making these tie downs well suited to regular exposure to moisture and harsh coastal conditions.

Choose the Right Length for Your Setup

• Available in 2m or 4m to suit different loads and anchor points. Shorter for compact setups, longer for wider loads and trailers.

Product Details

Australian Standards

Tie downs & Straps

Transport Tie Downs and Tie Downs are manufactured to our specifications and comply with: Australian Standards / New Zealand Standards AS/NZS 4380:2001 Motor vehicles—Cargo restraint systems—Transport webbing and components.

Bungees

Bungee straps/Octopus Straps comply with: Consumer Goods (Elastic luggage straps) Safety Standard 2017.

Safety Information

WARNING: DO NOT EXCEED LASHING CAPACITY (shown in kilograms (KG) on the front of each pack)

Key Information

Selection & Use

• Choose a lashing capacity (LC) appropriate to the mode of use and the nature of the load.
• Pre-tension lashings and check them regularly during the journey.

Material

• Strap is Polyester (PES) and not resistant to chemical attack.
• Chemical effects may increase with temperature and can cause restraint failure.
• If any chemical contact/contamination occurs, remove the web lashing from service and dispose of it.

Operating Temperatures

• Suitable range: -40 °C to 100 °C (per standard).
• Ranges may vary in chemical environments.
• Temperature changes can affect webbing force—check tension after entering warm areas.

Protection & Limit of Twist

• Protect against friction, abrasion, and edges with radius < 2× webbing thickness (use sleeves/corner protectors).
• Do not use webbing restraints when knotted.

Storage & Maintenance

• If saturated, dry in a shaded area before storing.
• Lightly lubricate the ratchet mechanism as needed.
• Store in a dry location when not in use.

Meanings relating to a webbing restraint system

• Lashing Capacity (LC): Half of the minimum breaking strength in straight pull, expressed in kilograms (kg).
• Fixed End Length (Lgf): The webbing end with the tensioning device; a fixed end length.
• Adjustable End Length (Lgl): The length of webbing without the tensioning device; an adjustable end length.
• Hook & Keeper / S Hook / Carabiner Hook: The end fittings used on the restraint system.

Warranty

Monkey Grip offers a 365-day warranty on all our products, within 365 days from purchase date and will either credit, replace, or refund the faulty or defective product. The warranty covers all manufacturing faults and defects. It does not cover wear and tear, or damage caused by misuse, accident, or failure to follow instructions. Please note any modifications made to the product will void the warranty.