Searles Scotts Handygreen Spreader II 108750

Features

Lightweight - easy to hold in one hand while turning the handle with the other

Fertiliser hopper holds up to 2kg of Scotts Lawn Builder fertiliser

Check the spreader setting on the Scotts Lawn Builder bag and adjust accordingly using the simple slide adjuster

Suitable For

Application of all Scotts Lawn Builder Slow Release Lawn Foods

Not Suitable For

Not recommended for use with powdered fertilisers - the spreader may clog and break

Not recommended for spreading lawn seed unless it is thoroughly mixed with a granular lawn starter fertiliser

Direction Of Use

To work out how much fertiliser you should put into the spreader:

1. Calculate the area of the lawn in square metres by multiplying the length by the width (1 large stride = 1 metre approx)

2. The area multiplied by the application rate will give the exact amount of Scotts Lawn Builder you need. You will find the recommended application rate on the pack

3. Use a set of scales to weigh it out and then add it to the spreader ready to apply - do not be tempted to add a 'bit extra for luck' because over-application may result in nitrogen burning

4. Select the spreader setting listed on the product bag

5. Holding the spreader level, walk steadily while squeezing the trigger in the handle and turning the handle

6. To obtain even coverage, spread half the required amount in a north-south direction, then the other half in an east-west direction

As a Guide m2

________________________

1/4 Tennis court 65

1/2 Tennis court 130

Full Tennis court 260