Screwbolts & Masonbolts

The MASONBOLT T17-12x100mm is a durable masonry anchor bolt with a 12mm diameter and 100mm length, designed for securing heavy fixtures to concrete, brick, or stone. Its self-tapping design allows for easy installation without the need for additional plugs or anchors. Made from corrosion-resistant steel, it provides reliable, long-lasting hold in demanding environments, making it ideal for construction and industrial applications.

[additional]

The MASONBOLT T17-12x65mm is a durable masonry anchor bolt designed for securing heavy-duty fixtures in concrete, brick, or stone. With a 12mm diameter and 65mm length, it features a self-tapping design for easy installation and strong hold. Made from corrosion-resistant steel, it’s ideal for both indoor and outdoor applications.

[additional]

The 6.5 x 160mm Xtreme Hammer Drill bit is a high-performance solution for fast, precise drilling into masonry, concrete, and stone, making it ideal for demanding construction and renovation projects where reliability and accuracy are critical.

Key Features

• Application suitability – Optimised for hammer drills to deliver clean, accurate holes in masonry, concrete, brick, and natural stone.
• Design – Precision-ground tip and spiral flute design ensure rapid dust removal and stable, low-vibration drilling.
• Material quality – Manufactured from high-grade steel with a hardened carbide tip for superior cutting performance.
• Durability – Wear-resistant construction and reinforced tip geometry extend bit life under continuous heavy-duty use.
• Installation – Standard 6.5mm shank fits most SDS and rotary hammer drills for quick, secure bit changes.
• Maintenance – Simple to clean and inspect, with a robust finish that resists corrosion and surface damage.
• Versatility – Suitable for fixing anchors, plugs, and fasteners across a wide range of structural and finishing tasks.

[additional]

The MACSIM Fastener Clever Tool 10G [Blister Pack] is a versatile fastening solution designed for quick, efficient installation of 10G fasteners across construction, renovation, and DIY projects, helping you achieve secure, professional results with minimal effort.

Key Features

• Application suitability – Optimised specifically for 10G fasteners, making it ideal for framing, fixing, and general fastening tasks.
• Design – Ergonomic, compact design for comfortable handling and precise control in tight or awkward spaces.
• Material quality – Manufactured from high-quality, robust components to ensure consistent performance under regular use.
• Durability – Built to withstand demanding site conditions, reducing wear and extending tool life over time.
• Installation – Enables fast, accurate placement of 10G fasteners, improving productivity and reducing installation errors.
• Maintenance – Simple, low-maintenance construction that’s easy to clean and keep in reliable working order.
• Versatility – Suitable for a wide range of substrates and project types, from professional construction to home DIY tasks.

[additional]

The 10G x 65mm Clever Tool is a reliable fastener designed for secure fixing in timber, metal, and composite materials, making it ideal for construction, renovation, and DIY projects where strength and consistency are essential.

Key Features

• Application suitability – Optimised length and gauge for strong, stable fixing in framing, cladding, decking, and general-purpose construction tasks.
• Design – Precision-engineered shank and head profile provide excellent grip, reduced splitting, and a clean, flush finish.
• Material quality – Manufactured from high-grade steel to deliver consistent performance and dependable holding power.
• Durability – Corrosion-resistant finish helps protect against rust and wear in demanding indoor and outdoor environments.
• Installation – Compatible with standard drivers and tools, allowing quick, accurate installation with minimal effort.
• Maintenance – Low-maintenance fastener that retains its integrity over time, reducing the need for rework or replacement.
• Versatility – Suitable for a wide range of structural and finishing applications across timber, light metal, and composite substrates.

[additional]

MACSIM Clever Tool Standard Head 12G [Blister Pack] is a robust fastening solution designed for secure installation into timber, metal, and composite materials, making it ideal for construction, renovation, and DIY projects where strength and reliability are essential.

Key Features

• Application suitability – Engineered for use across structural, fit-out, and general-purpose fixing in timber, light metal, and composite substrates.
• Design – Standard head profile provides a clean, low-profile finish while ensuring strong drive engagement and holding power.
• Material quality – Manufactured from high-grade steel for consistent performance and dependable load-bearing capacity.
• Durability – Corrosion-resistant finish helps protect against rust and wear in demanding indoor and sheltered outdoor environments.
• Installation – Compatible with common power drivers and hand tools, allowing quick, accurate installation with minimal effort.
• Maintenance – Secure, long-lasting fastening reduces the need for re-tightening or replacement over time.
• Versatility – Supplied in a convenient blister pack, suitable for tradespeople and DIY users needing a reliable, ready-to-use fastener option.

[additional]

MACSIM Clever Tool Standard Head 14G [Blister Pack] is a robust fastening solution designed for secure installation into timber, metal, and composite materials, making it ideal for construction, renovation, and DIY projects where strength and reliability are essential.

Key Features

• Application suitability – Engineered for use across structural, fit-out, and general-purpose fixing in timber, light metal, and composite substrates.
• Design – Standard head profile provides a clean, low-profile finish while ensuring strong drive engagement and holding power.
• Material quality – Manufactured from high-grade steel for consistent performance and dependable load-bearing capacity.
• Durability – Corrosion-resistant finish helps protect against rust and wear in demanding indoor and sheltered outdoor environments.
• Installation – Compatible with common power drivers and hand tools, allowing quick, accurate installation with minimal effort.
• Maintenance – Secure, long-lasting fastening reduces the need for re-tightening or replacement over time.
• Versatility – Supplied in a convenient blister pack, suitable for tradespeople and DIY users needing a reliable, ready-to-use fastener option.

[additional]

MACSIM Durabit HSS Jobber Titanium Coated 13 Piece Drill Set (1.5mm–6.5mm) is a comprehensive, high-performance drilling solution designed for precise, clean holes in metal, wood, and plastic. Ideal for construction, fabrication, and DIY projects, this set offers reliable accuracy, long tool life, and professional results across a wide range of applications.

Key Features

• Application suitability: Engineered for precision drilling in metal, timber, and plastics across construction, workshop, and home DIY environments.
• Design: Jobber-length bits with accurately ground tips for fast starting, reduced wandering, and smooth, clean hole finishes.
• Material quality: Manufactured from high-speed steel (HSS) for superior cutting performance and consistent, reliable drilling.
• Durability: Titanium-coated surfaces reduce friction, heat build-up, and wear, extending bit life under demanding use.
• Installation: 1.5mm–6.5mm size range in 0.5mm increments fits standard drill chucks for quick, straightforward setup.
• Maintenance: Supplied in an organised, durable case that keeps bits protected, clearly sized, and easy to access.
• Versatility: Comprehensive 13-piece set covers fine detail work through to larger diameter holes for a wide variety of tasks.

[additional]

MACSIM Durabit HSS Jobber Titanium Coated 25 Piece Drill Set (1.0mm–13.0mm) is a comprehensive, high-performance drilling solution designed for precise, clean holes in metal, wood, and plastic. Ideal for construction, fabrication, and DIY projects, this set offers reliable accuracy, long tool life, and professional results across a wide range of applications.

Key Features

• Application suitability: Engineered for precision drilling in metal, timber, and plastics across construction, workshop, and home DIY environments.
• Design: Jobber-length bits with accurately ground tips for fast starting, reduced wandering, and smooth, clean hole finishes.
• Material quality: Manufactured from high-speed steel (HSS) for superior cutting performance and consistent, reliable drilling.
• Durability: Titanium-coated surfaces reduce friction, heat build-up, and wear, extending bit life under demanding use.
• Installation: 1.0mm–13.0mm size range in 0.5mm increments fits standard drill chucks for quick, straightforward setup.
• Maintenance: Supplied in an organised, durable case that keeps bits protected, clearly sized, and easy to access.
• Versatility: Comprehensive 25-piece set covers fine detail work through to larger diameter holes for a wide variety of tasks.

[additional]

[additional]

MACSIM Durabit HSS Step Drill 2-Flute Straight Titanium Coated 4–12mm (9 Steps) is a precision step drill designed to produce clean, accurately sized holes in metal, plastic, and wood, making it ideal for construction, electrical, and DIY projects where accuracy and finish matter.

Key Features

• Application suitability: Optimised for drilling into sheet metal, plastics, and timber commonly used in construction, electrical enclosures, and home projects.
• Design: 2-flute straight step design with 9 clearly marked steps from 4–12mm for smooth, controlled cutting and easy size identification.
• Material quality: Manufactured from high-speed steel (HSS) for reliable cutting performance and edge retention.
• Durability: Titanium coating reduces friction, heat build-up, and wear, extending tool life under frequent use.
• Installation: Standard shank fits most power drills, allowing quick setup and stable operation on-site or in the workshop.
• Maintenance: Low-maintenance design; simply clean after use and store dry to preserve the cutting edges and coating.
• Versatility: Single bit covers multiple hole sizes (4–12mm), reducing bit changes and tool clutter while handling a wide range of tasks.

[additional]

MACSIM Durabit HSS Step Drill 2-Flute Straight Titanium Coated 4-20(9 Steps) is a precision step drill designed to produce clean, accurately sized holes in metal, plastic, and wood, making it ideal for construction, electrical, and DIY projects where accuracy and finish matter.

Key Features

• Application suitability: Optimised for drilling into sheet metal, plastics, and timber commonly used in construction, electrical enclosures, and home projects.
• Design: 2-flute straight step design with 9 clearly marked steps from 4–20mm for smooth, controlled cutting and easy size identification.
• Material quality: Manufactured from high-speed steel (HSS) for reliable cutting performance and edge retention.
• Durability: Titanium coating reduces friction, heat build-up, and wear, extending tool life under frequent use.
• Installation: Standard shank fits most power drills, allowing quick setup and stable operation on-site or in the workshop.
• Maintenance: Low-maintenance design; simply clean after use and store dry to preserve the cutting edges and coating.
• Versatility: Single bit covers multiple hole sizes (4–20mm), reducing bit changes and tool clutter while handling a wide range of tasks.

[additional]

The MACSIM M2 Steel Chamfer Bit 8–22mm is a precision chamfering tool designed for clean, accurate deburring and beveling of holes in metal, plastic, and wood, making it ideal for construction, fabrication, and DIY projects where a professional finish is essential.

Key Features

• Application suitability – Optimised for chamfering and deburring drilled holes from 8–22mm across metal, plastic, and timber substrates.
• Design – Precision-ground cutting edges and tapered profile ensure smooth, chatter-free cutting and consistent chamfer angles.
• Material quality – Manufactured from high-grade M2 high-speed steel for reliable cutting performance and edge retention.
• Durability – Tough construction resists wear, heat, and deformation under repeated use in demanding site and workshop conditions.
• Installation – Standard shank fits most common drill chucks for quick, hassle-free setup with corded or cordless drills.
• Maintenance – Simple to clean and can be re-sharpened to extend tool life and maintain cutting efficiency.
• Versatility – Suitable for countersinking fasteners, breaking sharp edges, and finishing holes in a wide range of construction and DIY applications.

[additional]

The MACSIM M2 Steel Chamfer Bit 6–30mm is a precision chamfering tool designed for clean, accurate deburring and beveling of holes in metal, plastic, and wood, making it ideal for construction, fabrication, and DIY projects where a professional finish is essential.

Key Features

• Application suitability – Optimised for chamfering and deburring drilled holes from 6–30mm across metal, plastic, and timber substrates.
• Design – Precision-ground cutting edges and tapered profile ensure smooth, chatter-free cutting and consistent chamfer angles.
• Material quality – Manufactured from high-grade M2 high-speed steel for reliable cutting performance and edge retention.
• Durability – Tough construction resists wear, heat, and deformation under repeated use in demanding site and workshop conditions.
• Installation – Standard shank fits most common drill chucks for quick, hassle-free setup with corded or cordless drills.
• Maintenance – Simple to clean and can be re-sharpened to extend tool life and maintain cutting efficiency.
• Versatility – Suitable for countersinking fasteners, breaking sharp edges, and finishing holes in a wide range of construction and DIY applications.

[additional]

OTTER Decking 2 in 1 Drilling and Countersinking Bit 10G–12G x 3.6mm (Blister Pack of 1) is a combined drilling and countersinking solution designed for clean, professional fastening in decking, timber, and general construction projects. It allows you to drill pilot holes and create neat countersinks in a single step, improving speed, accuracy, and finish quality on site or in the workshop.

Key Features

• Application suitability – Optimised for decking, softwood, hardwood, and general timber construction, delivering clean holes and consistent screw seating.
• Design – 2-in-1 pilot drill and countersink geometry for precise alignment and flush or recessed screw heads in one pass.
• Material quality – Manufactured from high-quality steel for reliable cutting performance and reduced bit wear.
• Durability – Robust construction and wear-resistant cutting edges support repeated use in demanding jobsite conditions.
• Installation – Sized for 10G–12G screws with a 3.6mm pilot, helping reduce timber splitting and ensuring secure, accurate fastening.
• Maintenance – Simple to clean and inspect, with a design that allows easy replacement if the pilot tip becomes worn.
• Versatility – Suitable for use with standard drill drivers across a wide range of outdoor and indoor timber and decking applications.

[additional]

The MFD Hex Flange Head C3 Galvanised Masonbolt M10-12 x 100mm (Box of 25) is engineered for secure, heavy-duty anchoring in masonry and concrete, delivering reliable performance where strong, permanent fixings are essential.

Key Features

• Application suitability – Ideal for anchoring structural fixtures, brackets, and heavy equipment into masonry and concrete substrates.
• Design – Hex flange head provides excellent load distribution and grip, allowing high tightening torque and a clean, low-profile finish.
• Material quality – Manufactured from high-grade steel for consistent strength, reliability, and performance under demanding loads.
• Durability – C3 galvanised coating offers robust corrosion resistance, extending service life in standard and mildly corrosive environments.
• Installation – Designed for straightforward installation with standard tools, ensuring fast, secure fixing with minimal preparation.
• Maintenance – Low-maintenance solution that retains clamping force over time, reducing the need for periodic retightening.
• Versatility – M10-12 x 100mm size and box of 25 make it suitable for a wide range of commercial, industrial, and trade applications.

[additional]

The MFD Hex Flange Head C3 Galvanised Masonbolt M10-12 x 65mm (Box of 50) is engineered for secure, heavy-duty anchoring in masonry and concrete, delivering reliable performance where strong, permanent fixings are essential.

Key Features

• Application suitability – Ideal for anchoring structural fixtures, brackets, and heavy equipment into masonry and concrete substrates.
• Design – Hex flange head provides excellent load distribution and grip, allowing high tightening torque and a clean, low-profile finish.
• Material quality – Manufactured from high-grade steel for consistent strength, reliability, and performance under demanding loads.
• Durability – C3 galvanised coating offers robust corrosion resistance, extending service life in standard and mildly corrosive environments.
• Installation – Designed for straightforward installation with standard tools, ensuring fast, secure fixing with minimal preparation.
• Maintenance – Low-maintenance solution that retains clamping force over time, reducing the need for periodic retightening.
• Versatility – M10-12 x 65mm size and box of 50 make it suitable for a wide range of commercial, industrial, and trade applications.

[additional]

HEX Flange Galvanised Masonbolt M8-10x60mm (Box of 50) is a heavy-duty masonry anchor designed for securely fastening fixtures to concrete, brick, and block in demanding construction and renovation projects. Ideal for structural fixings, frames, brackets, and heavy equipment where strength and reliability are critical.

Key Features

• Application suitability – Engineered for secure anchoring in solid concrete, brick, and block for both commercial and residential projects.
• Design – Hex flange head provides excellent load distribution and grip, ensuring a stable, flush, and secure fixing.
• Material quality – Manufactured from high-grade steel for consistent performance under high load conditions.
• Durability – Galvanised coating offers strong corrosion resistance, extending service life in indoor and sheltered outdoor environments.
• Installation – Through-fixing design with M8-10x60mm dimensions allows quick, straightforward installation using standard tools.
• Maintenance – Low-maintenance solution that retains clamping force and reliability over time with minimal inspection.
• Versatility – Supplied in a box of 50, ideal for bulk use on site for fixing frames, rails, brackets, machinery, and other heavy fixtures.

[additional]

HEX Flange Galvanised Masonbolt M18-10x97mm (Box of 25) is a heavy-duty masonry anchor designed for securely fastening fixtures to concrete, brick, and block in demanding construction and renovation projects. Ideal for structural fixings, frames, brackets, and heavy equipment where strength and reliability are critical.

Key Features

• Application suitability – Engineered for secure anchoring in solid concrete, brick, and block for both commercial and residential projects.
• Design – Hex flange head provides excellent load distribution and grip, ensuring a stable, flush, and secure fixing.
• Material quality – Manufactured from high-grade steel for consistent performance under high load conditions.
• Durability – Galvanised coating offers strong corrosion resistance, extending service life in indoor and sheltered outdoor environments.
• Installation – Through-fixing design with M8-10x97mm dimensions allows quick, straightforward installation using standard tools.
• Maintenance – Low-maintenance solution that retains clamping force and reliability over time with minimal inspection.
• Versatility – Supplied in a box of 25, ideal for bulk use on site for fixing frames, rails, brackets, machinery, and other heavy fixtures.

[additional]