Craft Glues & Accessories

Selleys Liquid Nails Mirror & Metal is a neutral-cure silicone adhesive formulated to bond mirrors safely without attacking the silver backing. This 310g pack is the non-corrosive choice for mirror and metal installation.

Key Features

• Neutral-cure silicone — will not de-silver mirror backing
• High-strength, durable bond
• Moisture and heat resistant
• Suitable for interior and exterior use
• Easy to apply
• Bonds a wide temperature range once cured

Ideal for: Installing mirrors and bonding metal, glass, tiles and ceramics. Not for aquariums or below-waterline use. Note: this silicone-based adhesive is not paintable.

Knauf Cornice Adhesive is a plaster-based setting compound for bonding paper-faced and plaster cornices to plasterboard and masonry, and for reinforcing cornice joints. The Compounds and Adhesives Catalogue lists the DIY 3 kg pail as Cornice Adhesive 45 in a smaller pack.

This listing is for one 3 kg DIY pail (Knauf material 00747816 / SKU 747816). The 3 kg DIY size is in the catalogue; the live Cornice Adhesive variants table currently shows 10 kg and 20 kg bags.

Features

• Same Cornice Adhesive 45 chemistry in a DIY pail
• Mixes easily; excellent wet tack and adhesion
• Approximately 45-minute set
• Also suitable for small decorative plaster fixings and joint reinforcing

This Pack

Applications

• DIY cornice installation and joint reinforcing
• Small decorative plaster fixings

Documents

• Cornice Adhesive 45, 60 and 90 Product Datasheet
• Cornice Adhesive Safety Data Sheet
• VOC Content Test Certificate – Cornice Adhesive
• Compounds and Adhesives Selector Chart
• Compounds and Adhesives Catalogue

Features

• Variable speed control by trigger and dial
• Anti-drip function stops excess sealant from oozing out
• 0-28mm per second no load pushing speed
• 360º rotating sealant holder
• Compact and lightweight design

Specifications

Standard Accessories

• Holder
• Holder Joint
• Piston Cartridge

Downloads

• Product Manual
• Parts Diagram

• Variable speed dial and variable speed trigger for precise control of material flow
• Durable plunger rod with auto-retract anti-drip feature
• Contoured grip with rubber overmould for comfortable use and handling
• LED for improved visibility of application
• Interchangeable cartridge holders (available separately

Selleys Storm Sealant creates an immediate waterproof seal — even when applied in the rain — and works on wet or dry surfaces. Flexible, UV and weather resistant, and paintable with two coats of water-based paint once cured. This listing is the Clear 290ml cartridge.

Key Features

• Immediate waterproof seal, even applied in rain
• Works on wet or dry surfaces
• Flexible, long-lasting seal
• UV and weather resistant
• Paintable with 2 coats of water-based paint

Ideal for: Urgent roof and gutter leak repairs in storms; good adhesion on most surfaces indoors and outdoors.

Specifications

Video

• Storm Sealant demo

Documents

• Technical Data Sheet (TDS)
• VOC Content Certificate
• Safety Data Sheet (Clear)

Selleys 650 FC is a fast-cure silane-modified polymer adhesive sealant with high strength and flexibility for construction bonding. Water, UV and weather resistant; paintable when fully cured; meets AS 2329-1999. This listing is Grey 300mL.

Key Features

• Fast-curing adhesive sealant
• Ideal for bonding a wide range of materials
• Water, UV, and weather resistant
• High strength and flexibility for construction jobs
• Paintable once fully cured

Ideal for: Interior and exterior bonding on wood, concrete, tiles, masonry, brick and metal. Not for PE/PP/PTFE/bitumen or submersion before cure.

Specifications

Video

• 650 FC product video
• 650 FC demo

Documents

• Technical Data Sheet (TDS)
• VOC Content Certificate
• Safety Data Sheet

Selleys Liquid Nails Fast Grab is a high-grab construction adhesive for immediate adhesion on vertical jobs, reducing the need for clamping. Paintable when cured and suitable for a wide range of surfaces. Made in Australia. This listing is 420g.

Key Features

• Instant hold
• Ideal for vertical jobs
• Reduces need for clamping
• Paintable when cured

Ideal for: Timber, plasterboard, MDF, concrete, tiles and acoustic panels. Not for mirrors, prolonged moisture, PE/PP/Teflon.

Specifications

Documents

• Technical Data Sheet (TDS)
• VOC Content Certificate
• Safety Data Sheet

Selleys Liquid Nails Flex is a flexible SMP construction adhesive that stretches up to 400%, bonds damp or dry surfaces, and bridges gaps up to 9mm. Low VOC/low odour for interior and exterior use. This listing is White 430g.

Key Features

• Flexible construction adhesive
• Stretches up to 400%
• Strong, durable bond
• Bonds damp or dry surfaces
• Interior and exterior use
• Low VOC, low odour
• Bridges gaps up to 9mm
• Fast curing

Ideal for: Common building materials indoors/outdoors. Not sole support for structural/overhead; not for PE/PP/ABS/PTFE/nylon/PMMA or permanent immersion.

Specifications

Documents

• Technical Data Sheet (TDS)
• VOC Content Certificate
• Safety Data Sheet

KwikWeld syringe is the fast-setting J-B Weld epoxy in a 25 ml dispenser for metal and other hard surfaces.

Key features

• Tensile strength 3127 PSI.
• Sets in 6 minutes. Full cure in 4–6 hours.
• Cures dark grey.
• Heat resistance to 121°C.
• Good fuel resistance.

Suitable surfaces

• Best on most metals, stone, concrete and fibreglass.
• Also bonds rigid plastic, wood and ceramic.

Specifications

Surface preparation

Clean the repair area with detergent or a degreaser, then roughen it with a file or coarse sandpaper. Mix and apply.

Formula 1 Headlight Restorer & Sealant is a 237 ml wipe-on treatment for cloudy or yellowed headlight lenses, with a sealant in the same step.

Key features

• Wipe on and wipe off.
• No taping, sanding or machine.
• Clears cloudiness and yellowing so more light gets through.
• Sealant slows the lens oxidising again.

Where to use

• Headlight lenses.

Specifications

How to use

Wipe the restorer on the lens and wipe it off. The sealant stays on the plastic.

TankWeld is a 28 g hand-mixable epoxy putty for sealing holes in metal tanks that hold water, fuel or other chemicals.

Key features

• Tensile strength 4000 PSI.
• Sets in 5 minutes. Full cure in 1 hour.
• Cures grey.
• Fuel resistant.
• Heat resistance to 176°C.

Suitable surfaces

• Best on metal.
• Also bonds fibreglass and rigid plastics.
• Not for polypropylene or polyethylene.

Specifications

How to use

Mix the stick by hand until the colour is uniform, then press or mould it into the crack, gap or hole. Once cured it can be sanded, drilled, tapped and painted.

Surface preparation

Clean the repair area with detergent or a degreaser, then roughen it with a file or coarse sandpaper.

Documents

• Safety data sheet

PlasticWeld putty is a 57 g hand-mixable epoxy for filling gaps, sealing cracks and repairing most plastics.

Key features

• Tensile strength 700 PSI.
• Sets in 25 minutes. Full cure in 4 hours.
• Cures white.
• Can be sanded and painted.
• Heat resistance to 93°C.

Suitable surfaces

• Most flexible or rigid plastics.
• Also bonds fibreglass, ceramic and metal.
• Not for polypropylene or polyethylene.

Specifications

How to use

Mix the stick by hand until the colour is uniform, then press or mould it into the crack, gap or hole. Once cured it can be sanded, drilled, tapped and painted.

Surface preparation

Clean the repair area with detergent or a degreaser, then roughen it with a file or coarse sandpaper.

Documents

• Safety data sheet

KwikWood is a 28 g hand-mixable epoxy putty for filling, sealing and rebuilding wood.

Key features

• Tensile strength 2450 PSI.
• Sets in 15–25 minutes. Full cure in 1 hour.
• Cures tan.
• Easy to sand.
• Paintable in 1 hour.
• Will not shrink or sag.

Suitable surfaces

• Filling, sealing and rebuilding wood.
• Bonding wood.
• Holes from rot, insects and similar damage.

Specifications

How to use

Mix the stick by hand until the colour is uniform, then press or mould it into the crack, gap or hole. Once cured it can be sanded, drilled, tapped and painted.

Surface preparation

Clean loose material out of the repair. Mix the stick until the colour is uniform, then press it into the hole or crack.

Documents

• Safety data sheet

KwikWeld is the fast-setting version of J-B Weld two-part epoxy. This carded pack is 57 g. It is a paste for bonding and filling gaps, and once cured it can be sanded, drilled, tapped, shaped and painted.

Key features

• Tensile strength 3127 PSI.
• Sets in 6 minutes. Full cure in 4–6 hours.
• Cures dark grey.
• For fast bonding and gap filling on metal and other hard surfaces.

Suitable surfaces

• Best on most metals, stone, concrete and fibreglass.
• Also bonds rigid plastic, wood and ceramic.

Specifications

Surface preparation

Clean the repair area with detergent or a degreaser, then roughen it with a file or coarse sandpaper. Mix equal parts and apply.

Documents

• Safety data sheet

HighHeat putty is a 57 g hand-mixable epoxy for filling gaps and sealing cracks on hot parts such as mufflers and tailpipes.

Key features

• Tensile strength 4000 PSI.
• Sets in 1 hour. Full cure in 8 hours.
• Cures grey.
• Heat resistance to 260°C.
• Fuel resistant.

Suitable surfaces

• Best on metal, stone and concrete.
• Also bonds fibreglass and ceramic.

Specifications

How to use

Mix the stick by hand until the colour is uniform, then press or mould it into the crack, gap or hole. Once cured it can be sanded, drilled, tapped and painted.

Surface preparation

Clean the repair area with detergent or a degreaser, then roughen it with a file or coarse sandpaper.

Documents

• Safety data sheet

Flamingo Tire Sealant & Inflator 450ml

Emergency tire sealant & inflator is designed to quickly seek-out and effectively seal most normal punctures and slow leaks.

It is 100% applicable to breach within 6mm on tubeless rubber tires of cars, motorcycles, electrical bicycles.

No jack nor tire-change is needed.

One step procedure of tires pumping and repairing is finished in seconds.

It can also be filled into new tires to prevent unexpected leakage.

Non-toxic and odorless.

No corrosion and no damage to the tire.

Features

• It is 100% applicable to breach within 6mm on tubeless rubber tires of cars, motorcycles, electrical bicycles.
• No jack nor tire-change is needed.
• One step procedure of tires pumping and repairing is finished in seconds.

Usage Directions

1. If possible remove object causing puncture.2.Shake the can well before use.3. Screw connecting tube firmly onto tires valve.4.Hold the can upright-button uppermost-remove protector cap-press button until tires appears firm.5.After pumping is finished, disconnect both ends of the tube. Immediately drive 3-5 km to allow the sealer to spread in tires and mend the puncture. Then check and adjust tires pressure.

Product Details

PlasticWeld syringe is a 25 ml clear epoxy for rigid and semi-rigid plastics, including PVC and ABS.

Key features

• Tensile strength 3900 PSI.
• Sets in 5 minutes. Full cure in 1 hour.
• Cures clear.
• Heat resistance to 121°C.
• For bonding and gap filling on plastics.

Suitable surfaces

• Best on PVC, ABS and other rigid plastics.
• Also bonds glass, tile and metal.

Specifications

Surface preparation

Clean the repair area with detergent or a degreaser, then roughen it with a file or coarse sandpaper. Mix and apply.

Selleys Tarzan's Grip Super Glue is a fast-setting cyanoacrylate for small household and craft repairs. This listing is the 3ml pack — handy for precise bonding of many rigid materials.

Key Features

• Fast-setting super glue
• Compact 3ml size for small repairs
• Strong bond on many common materials
• Trusted Selleys Tarzan's Grip range

Ideal for: Small rigid repairs on ceramics, metal, plastics (test first) and similar materials — not for PE/PP or flexible joints.

Specifications

Documents

• Safety Data Sheet search

Hobson E701 PURE Epoxy. E701 EPOXY: 585ML. 585 ml, 585 ML CARTRIDGE. HEC XCHEM PRO.

Key Features

• Product: E701 PURE EPOXY
• Finish: 585 ML CARTRIDGE
• Size: 585 ml
• Specification: HEC XCHEM PRO

Specifications

Related Parts

• MCXAM585 — XCHEM APPLICATOR MANUAL: 585ML
• MCXCPB-50 — BLOW OUT PUMP: SIZE 50
• MCXND1 — MIXER NOZZLE: E701
• MCXNE5 — MIXER NOZZLE EXTENSION: 250MM
• MCXNE7 — MIXER NOZZLE EXTENSION: 1M

Documents

• E701 XCHEM PRO Epoxy 585 ml - Performance Data
• Did You Know: Anchor 3Design Software
• Did You Know: XCHEM PRO Range
• Did You Know: XCHEM PRO Range Spotlight
• Did You Know: Hobson Chemical Volume Calculator
• XCHEM PRO - FAQ - Chemical Anchoring & XCHEM PRO - Easy Guide
• Hobson Anchor 3DESIGN Software
• Hobson Chemical Volume Calculator
• DOC 0515 E701 XCHEM Pure Epoxy - Rebar / Fire Resistant
• DOC 0514 E701 XCHEM Pure Epoxy - Option 1 / C1 / C2
• E701 XCHEM PRO Epoxy MSDS
• XCHEM PRO Chemical Chart - A1 Poster
• Hobson Conxtruct Product Guide

IMEX Stock the widest range of self adhesive bench tapes available.

These are supplied in polyamide coated steel tape and are German manufactured to Class II EU standard. we also stock vertical reading up or down for a variety of machinery.

This listing is Richter R to L 13mm Bench Tape 5m.

Key Features

• Richter R to L 13mm Bench Tape 5m

What's Included

• As supplied

Documents

• iMEX Catalogue

IMEX Stock the widest range of self adhesive bench tapes available.

These are supplied in polyamide coated steel tape and are German manufactured to Class II EU standard. we also stock vertical reading up or down for a variety of machinery.

This listing is Richter R to L 13mm Bench Tape 3m.

Key Features

• Richter R to L 13mm Bench Tape 3m

What's Included

• As supplied

Documents

• iMEX Catalogue

IMEX Stock the widest range of self adhesive bench tapes available.

These are supplied in polyamide coated steel tape and are German manufactured to Class II EU standard. we also stock vertical reading up or down for a variety of machinery.

This listing is Richter R to L 13mm Bench Tape 2m.

Key Features

• Richter R to L 13mm Bench Tape 2m

What's Included

• As supplied

Documents

• iMEX Catalogue

IMEX Stock the widest range of self adhesive bench tapes available.

These are supplied in polyamide coated steel tape and are German manufactured to Class II EU standard. we also stock vertical reading up or down for a variety of machinery.

This listing is Richter R to L 13mm Bench Tape 10m.

Key Features

• Richter R to L 13mm Bench Tape 10m

What's Included

• As supplied

Documents

• iMEX Catalogue

IMEX Stock the widest range of self adhesive bench tapes available.

These are supplied in polyamide coated steel tape and are German manufactured to Class II EU standard. we also stock vertical reading up or down for a variety of machinery.

This listing is Richter L to R 13mm Bench Tape 5m.

Key Features

• Richter L to R 13mm Bench Tape 5m

What's Included

• As supplied

Documents

• iMEX Catalogue

IMEX Stock the widest range of self adhesive bench tapes available.

These are supplied in polyamide coated steel tape and are German manufactured to Class II EU standard. we also stock vertical reading up or down for a variety of machinery.

This listing is Richter L to R 13mm Bench Tape 1m.

Key Features

• Richter L to R 13mm Bench Tape 1m

What's Included

• As supplied

Documents

• iMEX Catalogue

IMEX Stock the widest range of self adhesive bench tapes available.

These are supplied in polyamide coated steel tape and are German manufactured to Class II EU standard. we also stock vertical reading up or down for a variety of machinery.

This listing is Richter L to R 13mm Bench Tape 10m.

Key Features

• Richter L to R 13mm Bench Tape 10m

What's Included

• As supplied

Documents

• iMEX Catalogue

IMEX Stock the widest range of self adhesive bench tapes available.

These are supplied in polyamide coated steel tape and are German manufactured to Class II EU standard. we also stock vertical reading up or down for a variety of machinery.

This listing is Richter L to R 13mm Bench Tape 1m.

Key Features

• Richter L to R 13mm Bench Tape 1m

What's Included

• As supplied

Documents

• iMEX Catalogue

IMEX Stock the widest range of self adhesive bench tapes available.

These are supplied in polyamide coated steel tape and are German manufactured to Class II EU standard. we also stock vertical reading up or down for a variety of machinery.

This listing is Richter L to R 13mm Bench Tape 3m.

Key Features

• Richter L to R 13mm Bench Tape 3m

What's Included

• As supplied

Documents

• iMEX Catalogue

AutoTech Decorative Flakes 450g - BLUE BLEND.

Features

• For use with AutoTech Epoxy Floor Coating Kits.
• Features in Manhattan Kit.
• For use on all suitable concrete flooring.
• Customise your garage floor colour look.
• Bonds seamlessly with the wet film, becoming a permanent part of the coating.

Documents

• Safety Data Sheet
• Product Brochure
• Instructional Guide

AutoTech Solvent Based Sterling Grey Kit.

Features

• Resists hot tyre pick-up.
• Protects against oil stains, beads water and simply wipes clean.
• Seals and protects interior bare concrete floors with an easy one-coat application.
• Kit covers up to 40m².
• Please note: Colours shown are indicative only.

Documents

• Safety Data Sheet
• Technical Data Sheet
• Product Brochure
• Instructional Guide

AutoTech Solvent Based Manhattan Kit 8L.

Features

• Resists hot tyre pick-up.
• Protects against oil stains, beads water and simply wipes clean.
• Seals and protects interior bare concrete floors with an easy one-coat application.
• Kit covers up to 40m².
• Please note: Colours shown are indicative only.

Documents

• Safety Data Sheet
• Technical Data Sheet
• Product Brochure
• Instructional Guide

AutoTech Solvent Based Carbon Kit 8L.

Features

• Resists hot tyre pick-up.
• Protects against oil stains, beads water and simply wipes clean.
• Seals and protects interior bare concrete floors with an easy one-coat application.
• Kit covers up to 40m².
• Please note: Colours shown are indicative only.

Documents

• Safety Data Sheet
• Technical Data Sheet
• Product Brochure
• Instructional Guide

The Self Adhesive numerals feature super strong adhesive which can stick to any surface including brick, timber, steel, glass, plaster or letterboxes and are weatherproof

• Super strong adhesive, can stick to any surface
• Suitable for indoor and outdoor applications

The Self Adhesive numerals feature super strong adhesive which can stick to any surface including brick, timber, steel, glass, plaster or letterboxes and are weatherproof

• Super strong adhesive, can stick to any surface
• Suitable for indoor and outdoor applications

The Self Adhesive numerals feature super strong adhesive which can stick to any surface including brick, timber, steel, glass, plaster or letterboxes and are weatherproof

• Super strong adhesive, can stick to any surface
• Suitable for indoor and outdoor applications

The Self Adhesive numerals feature super strong adhesive which can stick to any surface including brick, timber, steel, glass, plaster or letterboxes and are weatherproof

• Super strong adhesive, can stick to any surface
• Suitable for indoor and outdoor applications

The Self Adhesive numerals feature super strong adhesive which can stick to any surface including brick, timber, steel, glass, plaster or letterboxes and are weatherproof

• Super strong adhesive, can stick to any surface
• Suitable for indoor and outdoor applications

The Self Adhesive numerals feature super strong adhesive which can stick to any surface including brick, timber, steel, glass, plaster or letterboxes and are weatherproof

• Super strong adhesive, can stick to any surface
• Suitable for indoor and outdoor applications

The Self Adhesive numerals feature super strong adhesive which can stick to any surface including brick, timber, steel, glass, plaster or letterboxes and are weatherproof

• Super strong adhesive, can stick to any surface
• Suitable for indoor and outdoor applications

The Self Adhesive numerals feature super strong adhesive which can stick to any surface including brick, timber, steel, glass, plaster or letterboxes and are weatherproof

• Super strong adhesive, can stick to any surface
• Suitable for indoor and outdoor applications