Handrails, Balustrade & Stair Stringers

The pillar end is designed to fit flush on the wall to support a 25mm diameter round tube. They can be used to create a hanging rail in the wardrobe or towel rail in the bathroom.

• 25mm hole size
• Chrome plated
• Sold as a pair per bag

Inside the wardrobe, measure the top of the wall on each side and depth from the back wall. Make a pencil mark where the end support will be located. Provide sufficient space for hanging clothes.

Choose or cut to the appropriate length of the oval tube to be inserted inside the wardrobe. Screw in the end supports onto the wardrobe and gently fit the tube edge into the hole of the end pillar.

Use centre pillar If the hanging rail runs extra long in the wardrobe.

The swageless fork terminal balustrading kit can be used for both timber and metal posts. The wires can be easily replaced as it does not require a swage to tighten the wires onto the balustrade.

• Suitable for stainless steel wire rope size 3mm - 3.2mm
• Stainless Steel Grade 316 to withstand extended outdoor and marine environment.
• Supplied in retailer pack of 1 set per card.

Traditionally, when a stainless steel wire in balustrade system becomes saggy, the fixing point must be replaced. Over a period of time, maintaining such balustrade system can be troublesome.

Our uniquely designed swageless wire balustrade system offers a cost effective solution. Simply unscrew the fixing point, straighten the wire and securely tighten the fixing point.

Always check with your local council for building regulations before attempting to install the balustrading kit.

The round tube centre pillar is designed to support a 25mm diameter round tube from the centre. They can be used to create a hanging rail in the wardrobe or towel rail in the bathroom.

• 25mm hole size
• Chrome plated
• 1 piece per bag

Provides a strong stability for the hanging rail.

Round tube can be used as handrails, towel racks, fencing, gates, and other various craft and furniture projects. It will provide a modern finish to your home and vehicle.

• 2.4m overall length x 25mm overall diameter
• Chrome plated
• Available for purchase of 10 tubes per pack

Chrome plated tubes are suitable for indoor for light commercial applications e.g. wardrobe rails, towel rails.

The oval tube hanging hook is used in conjunction with a flat oval tube to display hanging items in wardrobes, supermarkets, retail stores, and other storage purposes.

The hanging hook provides an economic solution to hanging sweaters and jumpers while avoiding hanger bumps.

Features

• 15mm x 30mm hole size
• Chrome plated
• Sold as a pair per card
• Fixing screws included in the package

The oval tube end support is designed to fit flush on the wall to support a 15mm x 30mm flat oval tube. They can be used to create a hanging rail in the wardrobe or towel rail in the bathroom.

Features

• 15mm x 30mm hole size
• Chrome plated
• Sold as a pair per card
• Fixing screws included in the package

Installation

• Inside wardrobe, measure the top of wall on each side and depth from the back wall. Make a pencil mark on the spot where the end support will be located. Provide sufficient space for hanging clothes.
• Choose the right length of the oval tube or cut the oval tube to be inserted inside wardrobe. Screw in the end supports onto the wardrobe and gently fit the tube edge into the hole of the end pillar.
• Use a centre pillar if the hanging rail runs extra long in the wardrobe.

The oval tube centre pillar is designed to provide support and stability of flat oval tube. They can be used to create a hanging rail in the wardrobe or towel rail in the bathroom.

Provides a strong stability for the hanging rail.

Features

• 15mm x 30mm hole size
• Chrome plated
• One piece per card
• Fixing screws included in the package

The oval tube hanging hook is used in conjunction with a flat oval tube to display hanging items in wardrobes, supermarkets, retail stores, and other storage purposes.

The hanging hook provides an economic solution to hanging sweaters and jumpers while avoiding hanger bumps.

Features

• 15mm x 30mm hole size
• Chrome plated
• Sold as a pair per card
• Fixing screws included in the package

Round tube can be used as handrails, towel racks, fencing, gates, and other various craft and furniture projects. It will provide a modern finish to your home and vehicle.

• 2.4m overall length x 19mm overall diameter
• Chrome plated
• Available for purchase of 10 tubes per pack

Chrome plated tubes are suitable for indoor for light commercial applications e.g. wardrobe rails, towel rails.

Round tube can be used as handrails, towel racks, fencing, gates, and other various craft and furniture projects. It will provide a modern black finish to your home and vehicle.

• 3.6m overall length x 19mm overall diameter
• Matt Black Finish
• Available for purchase of 10 tubes per pack

Suitable for indoor for light commercial applications e.g. wardrobe rails, towel rails.

The hook and eye balustrading kit is designed for fence balustrading as a securing point for wire ropes. The sleek finish and the material makes it suitable for both domestic and outdoor environments.

• Suitable for ropes and hooks up to 5mm in diameter.
• Made from stainless steel 316 marine grade for high rust-resistance. Suitable for coastal area.
• Supplied in a card of 1 set consisting of 1 x Hook & Eye Turnbuckle 5mm, 2 x Saddle, 2 x Thimble, 2 x Ferrule, 4 x Screw for Saddle

Recommended tools used for installation are Phillips head screw driver, power drill, wire cutter, adjustable spanner and a swage tool. Instructions are provided on the back of the retailer pack.

The swageless lag screw terminal balustrading kit can be used for both timber and metal posts. The wires can be easily replaced as it does not require a swage to tighten the wires onto the balustrade.

• Suitable for stainless steel wire rope size 3mm - 3.2mm
• Stainless Steel Grade 316 to withstand extended outdoor and marine environment.
• Supplied in retailer pack of 1 set per card.

Traditionally, when a stainless steel wire in balustrade system becomes saggy, the fixing point must be replaced. Over a period of time, maintaining such balustrade system can be troublesome.

Our uniquely designed swageless wire balustrade system offers a cost effective solution. Simply unscrew the fixing point, straighten the wire and securely tighten the fixing point.

Always check with your local council for building regulations before attempting to install the balustrading kit.

The flat oval tube can be used as handrails, towel racks, fencing, gates, and other various craft and furniture projects. It will provide a modern finish to your home and vehicle.

• 3.6m overall length x 25mm overall diameter
• Chrome plated
• Available for purchase of 10 tubes per pack

The oval tube offers an alternative solution to the round tube; it provides a strong holding strength and gives your home and vehicle a modern finish.

The pillar ends does not require any screws to fix a curtain or shower rod. Ideal for rental property or temporary space where permanent fixing is not permitted.

• 16-19mm hole size
• Chrome plated
• 2 pieces per card

Place the round tube on either side of the rod. Use a non-slip pad to fit inside the round tube to tighten the tube against the rod.

The round tube centre pillar is designed to support a 19mm diameter round tube from the centre. They can be used to create a hanging rail in the wardrobe or towel rail in the bathroom.

• 19mm hole size
• Chrome plated
• 1 piece per bag

Provides a strong stability for the hanging rail.

The rod flange is designed to hold the rod end. Ideally suited to hold a 19mm diameter round tube or curtain rod; it is used to create hanging rail in the wardrobe or shower rod in the bathroom.

• 19mm hole size
• Chrome plated
• Sold as a pair per bag. Fixing screws are included in the package

The flange is suitable for permanently installing the tube onto the wall. Use our adjustable pillar end range if the wall is covered in tile or If permanent fixing is not required.

The rod flange is designed to hold the rod end. Ideally suited to hold a 19mm diameter round tube or curtain rod; it is used to create hanging rail in the wardrobe or shower rod in the bathroom.

• 19mm hole size
• Chrome plated
• Sold as a pair per bag. Fixing screws are included in the package

The flange is suitable for permanently installing the tube onto the wall. Use our adjustable pillar end range if the wall is covered in tile or If permanent fixing is not required.

The pillar end is designed to fit flush on the wall to support a 19mm diameter round tube. They can be used to create a hanging rail in the wardrobe or towel rail in the bathroom.

• 19mm hole size
• Chrome plated
• Sold as a pair per bag

Inside the wardrobe, measure the top of the wall on each side and depth from the back wall. Make a pencil mark where the end support will be located. Provide sufficient space for hanging clothes.

Choose or cut to the appropriate length of the oval tube to be inserted inside the wardrobe. Screw in the end supports onto the wardrobe and gently fit the tube edge into the hole of the end pillar.

Use centre pillar If the hanging rail runs extra long in the wardrobe.

Round tube can be used as handrails, towel racks, fencing, gates, and other various craft and furniture projects. It will provide a modern finish to your home and vehicle.

• 1.8m overall length x 19mm overall diameter
• Chrome plated
• Available for purchase of 10 tubes per pack

Chrome plated tubes are suitable for indoor for light commercial applications e.g. wardrobe rails, towel rails.

Round tube can be used as handrails, towel racks, fencing, gates, and other various craft and furniture projects. It will provide a modern finish to your home and vehicle.

• 3.6m overall length x 19mm overall diameter
• Chrome plated
• Available for purchase of 10 tubes per pack

Chrome plated tubes are suitable for indoor for light commercial applications e.g. wardrobe rails, towel rails.

The rod flange is designed to hold the rod end. Ideally suited to hold a 25mm diameter round tube or curtain rod; it is used to create hanging rail in the wardrobe or shower rod in the bathroom.

• 25mm hole size
• Chrome plated
• Sold as a pair per bag. Fixing screws are included in the package

The flange is suitable for permanently installing the tube onto the wall. Use our adjustable pillar end range if the wall is covered in tile or If permanent fixing is not required.

The rod flange is designed to hold the rod end. Ideally suited to hold a 25mm diameter round tube or curtain rod; it is used to create hanging rail in the wardrobe or shower rod in the bathroom.

• 25mm hole size
• Chrome plated
• Sold as a pair per bag. Fixing screws are included in the package

The flange is suitable for permanently installing the tube onto the wall. Use our adjustable pillar end range if the wall is covered in tile or If permanent fixing is not required.

The round tube centre pillar is designed to support a 19mm diameter round tube from the centre. They can be used to create a hanging rail in the wardrobe or towel rail in the bathroom.

• 19mm hole size
• Matt Black finish
• 1 piece per bag

Provides a strong stability for the hanging rail.

The rod flange is designed to hold the rod end. Ideally suited to hold a 19mm diameter round tube or curtain rod; it is used to create hanging rail in the wardrobe or shower rod in the bathroom.

• 19mm hole size
• Matt Black Finish
• Sold as a pair per bag. Fixing screws are included in the package

The flange is suitable for permanently installing the tube onto the wall. Use our adjustable pillar end range if the wall is covered in tile or If permanent fixing is not required.

The rod flange is designed to hold the rod end. Ideally suited to hold a 19mm diameter round tube or curtain rod; it is used to create hanging rail in the wardrobe or shower rod in the bathroom.

• 19mm hole size
• Matt Black Finish
• Sold as a pair per bag. Fixing screws are included in the package

The flange is suitable for permanently installing the tube onto the wall. Use our adjustable pillar end range if the wall is covered in tile or If permanent fixing is not required.

The pillar end is designed to fit flush on the wall to support a 19mm diameter round tube. They can be used to create a hanging rail in the wardrobe or towel rail in the bathroom.

• 19mm hole size
• Matt Black Finish
• Sold as a pair per bag

Inside the wardrobe, measure the top of the wall on each side and depth from the back wall. Make a pencil mark where the end support will be located. Provide sufficient space for hanging clothes.

Choose or cut to the appropriate length of the oval tube to be inserted inside the wardrobe. Screw in the end supports onto the wardrobe and gently fit the tube edge into the hole of the end pillar.

Use centre pillar If the hanging rail runs extra long in the wardrobe.