Paslode

Paslode 50 x 2.5mm ring-shank, hot dipped galvanised 0-degree collated coil nails supplied with fuel cells for the cordless Paslode Impulse CoilMaster. Suited to cladding, plywood and ply bracing.

Features

• 0-degree collated coil nails
• Ring shank for high withdrawal resistance
• Hot dipped galvanised finish
• Supplied with 3 fuel cells
• For cladding, plywood and ply bracing

Specifications

Paslode 50mm C Series stainless steel straight brads, a 16 gauge lost head fastener offering corrosion resistance for exterior and coastal finishing. Supplied as a fuel pack for the Paslode gas TrimMaster bradder.

Features

• 16 gauge C series straight brad
• Stainless steel for corrosion resistance
• Lost head for a clean finish
• 2000 brads per box
• Includes 2 fuel cells
• Suits Paslode Impulse Straight TrimMaster B20710

Specifications

Paslode 50mm x 1.6mm C Series galvanised straight brads, supplied in a 3000 pack. These 16-gauge brads suit the Paslode T250 C Series bradder for trim and finishing work.

Features

• 50mm length
• 1.6mm diameter
• Galvanised for corrosion resistance
• Lost head for a clean finish
• 3000 brads per box

Specifications

Paslode 50mm C50 Impulse zinc plated brads. A 0-degree, 16 gauge fastener with a smooth shank and chisel point, designed for the Paslode TrimMaster 16ga straight bradder and supplied with three fuel cells.

Features

• 16 gauge straight brad
• Smooth shank with chisel point
• Zinc plated finish
• 3000 nails per pack
• Includes 3 fuel cells
• Suits Paslode Impulse Straight TrimMaster B20710

Specifications

Paslode 50mm DA angle brad nails in a bright finish, supplied in a 3000 pack. These 15-gauge angled clip-head brads suit Paslode DA angled bradders for finishing and trim work.

Features

• 50mm length
• Bright finish
• Clip head design
• DA angled collation
• 3000 brads per box

Specifications

Paslode 50mm 16 gauge zinc-plated angled C brad nails for the Impulse TrimMaster cordless bradder, supplied as a 2000 pack with two fuel cells. Zinc-plated for corrosion resistance and suited to general finishing applications.

Features

• 16 gauge brad nail
• Smooth shank
• Chisel point
• Zinc plated for corrosion resistance
• 20-degree collation angle
• Includes 2 fuel cells
• 2000 nails per pack

Specifications

Paslode 50mm 16 gauge stainless steel angled brad nails for the Impulse TrimMaster cordless bradder, supplied as a 2000 pack. The stainless steel finish suits exterior and corrosion-prone finishing applications.

Features

• 16 gauge angled brad
• Stainless steel construction
• 2000 brads per pack
• Suited to corrosion-prone applications

Specifications

Paslode 50 x 2.87mm hot dipped galvanised D-head impulse nails in a 1000-nail handy pack. Smooth-shank framing nails with a corrosion-resistant galvanised finish for use with Paslode gas framing nailers.

Features

• Hot dipped galvanised finish
• D-head design
• Smooth shank
• 1000 nails per box
• Corrosion resistant

Specifications

Paslode 50 x 2.5mm ring-shank stainless steel collated coil nails for the cordless Paslode Impulse CoilMaster. Manufactured from high quality stainless steel to drive straight and true regardless of timber density, with ultra-high withdrawal resistance.

Features

• Ring shank for high withdrawal resistance
• Stainless steel construction
• Superior collation keeps nails aligned at speed
• Drives straight regardless of timber density

Specifications

Paslode 45mm 16 gauge zinc-plated angled brad nails for the Impulse TrimMaster cordless bradder, supplied as a 2000 pack with two fuel cells. Made to strict quality control standards for reliable finishing work.

Features

• 16 gauge angled brad
• Smooth shank
• Zinc plated finish
• Includes 2 fuel cells
• 2000 nails per pack

Specifications

Genuine Paslode 45mm galvanised flooring staples for the FloorMaster pneumatic secret-nail flooring stapler. Supplied in a box of 1000, the 15.5 gauge staples have a galvanised finish for corrosion resistance.

Features

• Galvanised finish for corrosion resistance
• 15.5 gauge pneumatic flooring staple
• For secret-nail timber flooring

Specifications

Paslode 15 gauge 45mm steel frame brads designed to fix mouldings into light-gauge steel frame houses without gluing or screwing. The round shank, conical point and specially formulated resin give extra hold in steel, supplied as a box of 2000.

Features

• 15 gauge steel frame brad
• Round shank with conical point
• Special resin coating for extra hold in steel
• Holds stronger in steel than a 16ga C brad in timber
• 2000 brads per box

Specifications

Paslode 45mm x 1.6mm C Series (C45) galvanised straight brads, supplied in a 3000 pack. These 16-gauge brads suit the Paslode T250 C Series bradder for trim and finishing work.

Features

• 45mm length
• 1.6mm diameter
• Galvanised for corrosion resistance
• Lost head for a clean finish
• 3000 brads per box

Specifications

Paslode 45mm DA angle brad nails in a bright finish, supplied in a 3000 pack. These 15-gauge angled clip-head brads suit Paslode DA angled bradders for finishing and trim work.

Features

• 45mm length
• Bright finish
• Clip head design
• DA angled collation
• 3000 brads per box

Specifications

Paslode 45 x 2.5mm ring-shank, hot dipped galvanised 0-degree collated coil nails supplied with fuel cells for the cordless Paslode Impulse CoilMaster. Suited to cladding, fibre cement and plywood.

Features

• 0-degree collated coil nails
• Ring shank for high withdrawal resistance
• Hot dipped galvanised finish
• Supplied with 3 fuel cells
• For cladding, fibre cement and plywood

Specifications

Paslode 45mm C45 Impulse zinc plated brads. A 0-degree, 16 gauge fastener suited to the Paslode TrimMaster 16ga straight bradder, with a corrosion-resistant zinc plated coating.

Features

• 16 gauge C series straight brad
• Zinc plated finish for durability
• 3000 brads per pack with fuel
• Suits Paslode Impulse Straight TrimMaster B20710

Specifications

Genuine Paslode 38mm galvanised flooring staples for the FloorMaster pneumatic secret-nail flooring stapler. Supplied in a box of 1000, the smooth-shank staples have a galvanised finish for corrosion resistance.

Features

• Galvanised finish for corrosion resistance
• Smooth shank
• For secret-nail timber flooring

Specifications

Paslode 38mm steel frame brad, a 15 gauge hardened nail with a smooth round shank and conical point that penetrates steel framing without splaying. Resin coated for adhesion and holding power, it simplifies moulding installation in steel frame houses without gluing or screwing.

Features

• 15 gauge hardened steel frame brad
• Smooth round shank with conical point for steel
• Resin coated for superior holding power in steel
• Supplied as a fuel pack (2000 brads and 2 fuel cells)
• Designed for moulding installation in steel frame homes

Specifications

Paslode 38mm C Series stainless steel straight brads, a 16 gauge lost head fastener for corrosion-resistant finishing. Supplied as a fuel pack for the Paslode gas TrimMaster bradder.

Features

• 16 gauge C series straight brad
• Stainless steel construction for corrosion resistance
• Lost head style for a flush finish
• 2000 brads per box
• Includes 2 fuel cells
• Suits Paslode Impulse Straight TrimMaster B20710

Specifications

Paslode 38mm x 1.6mm C Series (C38) galvanised straight brads, supplied in a 3000 pack. These 16-gauge brads suit the Paslode T250 C Series bradder for trim and finishing work.

Features

• 38mm length
• 1.6mm diameter
• Galvanised for corrosion resistance
• Lost head for a clean finish
• 3000 brads per box

Specifications

Paslode 38mm 16 gauge stainless steel angled brad nails for the Impulse TrimMaster cordless bradder, supplied as a 2000 pack with fuel cells. The stainless steel construction suits exterior and corrosion-prone finishing applications.

Features

• 16 gauge angled brad
• Stainless steel construction
• Lost head
• Includes 2 fuel cells
• 2000 brads per box
• Suited to corrosion-prone applications

Specifications

Paslode 38mm C38 Impulse zinc plated brads, manufactured under strict quality control for finishing applications. A 0-degree, 16 gauge straight brad supplied with three fuel cells for the Paslode gas TrimMaster bradder.

Features

• 16 gauge straight brad
• Zinc plated finish
• Smooth shank with chisel point
• 3000 nails per pack
• Includes 3 fuel cells
• Suits Paslode Impulse Straight TrimMaster B20710

Specifications

Paslode 38mm 16 gauge zinc-plated angled brad nails for the Impulse TrimMaster cordless bradder, supplied as a 2000 pack with two fuel cells. Manufactured to strict quality control standards and suited to a wide range of finishing applications.

Features

• 16 gauge angled brad
• Smooth shank
• Chisel point
• Zinc plated finish
• 20-degree collation angle
• Includes 2 fuel cells
• 2000 nails per pack

Specifications

Paslode 38mm DA angle brad nails in a bright finish, supplied in a 3000 pack. These 15-gauge angled clip-head brads suit Paslode DA angled bradders for finishing and trim work.

Features

• 38mm length
• Bright finish
• Clip head design
• DA angled collation
• 3000 brads per box

Specifications

Paslode ND38 stainless steel straight brads, 38mm long and 2.0mm (14 gauge) diameter. The stainless steel construction resists corrosion for external and treated-timber finishing, supplied in a box of 2000.

Features

• 38mm ND Series straight brad
• Stainless steel for corrosion resistance
• Box of 2000

Specifications

Genuine Paslode 350g aerosol degreaser/cleaner for Impulse and pneumatic nail guns. High-performance formula that removes grease, oil, dirt, carbon, acid and wax deposits, dries quickly leaving no residue, and is safe on plastic components, electronics, O-rings and rubber seals.

Features

• Removes grease, oil, dirt, carbon, acid and wax deposits
• Quick-drying, no residue
• Safe on plastic and electronic parts
• Protects O-rings and rubber seals
• Improves tool performance and reduces service costs

Specifications

Paslode 32mm x 2.7mm hot dipped galvanised plastic-collated coil nails for pneumatic coil nailers. The hot dipped galvanised coating provides corrosion resistance for exterior and treated-timber fixing.

Features

• 32mm coil nail
• 2.7mm shank diameter
• Hot dipped galvanised finish
• 15-degree plastic collation
• Corrosion resistant

Specifications

Paslode 32mm x 2.5mm electro galvanised screw-hardened 15-degree plastic-collated coil nails for pneumatic coil nailers. The hardened screw shank improves grip and drive performance in dense material.

Features

• 32mm screw-hardened coil nail
• 2.5mm shank diameter
• Electro galvanised finish
• Hardened screw shank
• 15-degree plastic collation

Specifications

Paslode 32mm C Series straight brads with a lost head and galvanised finish, supplied in a 3000 pack. These 16-gauge brads suit the Paslode T250 C Series bradder for trim and finishing work.

Features

• 32mm length
• Lost head for a clean finish
• Galvanised for corrosion resistance
• 3000 brads per box

Specifications

Paslode 32mm DA angle brad nails in a bright finish, supplied in a 3000 pack. These 15-gauge angled clip-head brads suit Paslode DA angled bradders for finishing and trim work.

Features

• 32mm length
• Bright finish
• Clip head design
• DA angled collation
• 3000 brads per box

Specifications

Paslode 32mm C Series 20-degree angled brads, a 16 gauge galvanised fastener supplied as a fuel pack for the Paslode gas angled TrimMaster bradder. The angled collation gives access to tight corners for finishing work.

Features

• 16 gauge angled C series brad
• 20 degree collation for tight access
• Galvanised (zinc plated) finish
• 2000 brads per pack
• Includes 2 fuel cells
• Suits Paslode Impulse Angled TrimMaster bradder

Specifications

The Paslode DA65.1 is a pneumatic 15-gauge angled bradder that drives heavier DA Series brads from 32mm to 65mm. It has an angled magazine, LED headlight and no-mar tips for finishing work in tight spaces.

Features

• Drives DA Series 15ga angled brads 32-65mm
• LED headlight for visibility
• Adjustable depth of drive
• Nail lock-out bar prevents blank firing
• No-mar tips protect timber
• Sequential and bump fire modes; belt and rafter hook

Specifications

Paslode 32mm x 2.7mm hot dipped galvanised ring shank plastic-collated coil nails for pneumatic coil nailers. The ring shank adds holding power and the hot dipped galvanised coating gives corrosion resistance.

Features

• 32mm ring shank coil nail
• 2.7mm shank diameter
• Hot dipped galvanised finish
• Ring shank for extra hold
• 15-degree plastic collation

Specifications

Paslode 32 x 2.7mm smooth-shank, hot dipped galvanised 0-degree collated coil nails supplied with fuel cells for the cordless Paslode Impulse CoilMaster. Suited to cladding applications.

Features

• 0-degree collated coil nails
• Smooth shank
• Hot dipped galvanised finish
• Supplied with 3 fuel cells
• For cladding

Specifications

Paslode 32 x 2.5mm screw-hardened, electro galvanised 0-degree collated coil nails supplied with fuel cells for the cordless Paslode Impulse CoilMaster. Used for coil-based fastening applications such as cladding.

Features

• 0-degree collated coil nails
• Screw-hardened shank
• Electro galvanised finish
• Supplied with 3 fuel cells

Specifications

Paslode 32mm C32 Impulse galvanised brads for the Paslode gas TrimMaster straight bradder. Ideal for a wide range of finishing applications including skirting, architraves, panelling and mouldings. Supplied as a fuel pack with brads and fuel cells.

Features

• 16 gauge C series straight brad
• Zinc plated (galvanised) for corrosion resistance
• Smooth shank with chisel point
• 3000 brads per pack with fuel
• Suits Paslode Impulse Straight TrimMaster

Specifications

Paslode 27mm x 2.5mm electro galvanised ring shank plastic-collated coil nails for pneumatic coil nailers. The ring shank and round head provide added holding power for sheet and general fixing applications.

Features

• 27mm ring shank coil nail
• 2.5mm shank diameter
• Electro galvanised finish
• Round head
• Plastic collated for coil nailers

Specifications

Paslode 27 x 2.5mm ring-shank, hot dipped galvanised coil nails designed specifically for thin fibre cement sheets. The modified head and shank give enhanced holding power in 4.5mm and 6mm fibre cement for applications such as soffits, eaves lining and tile underlay.

Features

• Ring shank with round head and diamond tip
• Hot dipped galvanised finish
• Designed for thin (4.5mm and 6mm) fibre cement
• For soffits, eaves lining and tile underlay
• Supplied with 3 fuel cells

Specifications

Paslode 25mm C Series stainless steel straight brads, a 16 gauge lost head fastener offering corrosion resistance for exterior and coastal finishing. Supplied as a fuel pack for the Paslode gas TrimMaster bradder.

Features

• 16 gauge C series straight brad
• Stainless steel for corrosion resistance
• Lost head for a clean finish
• 2000 nails per box
• Includes 2 fuel cells
• Suits Paslode Impulse Straight TrimMaster B20710

Specifications

Paslode CNW 57 pneumatic 15-degree coil nailer that drives collated coil nails from 25mm to 57mm. It features a corrosion-resistant aluminium housing, adjustable depth of drive, and sequential and bump fire modes for high-volume fixing work.

Features

• Pneumatic 15-degree coil nailer
• Corrosion resistant aluminium housing
• Adjustable depth of drive
• Nail lock-out bar
• Skew nailing teeth for grip
• By-pass nail follower for fast reloading
• Sequential and bump fire modes
• No-mar tip and belt/rafter hook

Specifications

Paslode no-mar tip three-pack for the 250-series finish/angled nailers (250S / TrimMaster). Soft tips fit over the nailer nose to prevent marking of timber and finished surfaces. A confirmed retailer page for this exact SKU was not found (the closest genuine listing is a different-SKU IM250A-Li no-mar 3-pack), so specs are inferred.

Features

• Three no-mar tips per pack
• Prevents marks on timber and finished surfaces
• For Paslode 250S / TrimMaster finish and angled nailers

Specifications

Paslode 250ml pneumatic air tool lubricating oil, designed to lubricate and protect genuine Paslode pneumatic (air) tools. Helps maintain speed and power performance and protects internal components.

Features

• 250ml lubricating oil for pneumatic air tools
• Protects internal components and seals
• Helps maintain tool speed and power performance

Specifications

Three-pack of genuine Paslode No Mar Tips designed for the Paslode IM250A-Li 16 gauge lithium-ion angled finish nailer. The tips fit over the nose to prevent marking or damaging timber surfaces.

Features

• Prevents damage to timber surfaces
• Leaves no marks
• Three tips per pack

Specifications