Your cart
Your cart is empty
JB Weld High Heat Epoxy Putty Stick
$25.50
Pay with
$25.50
$25.50
HighHeat putty is a 57 g hand-mixable epoxy for filling gaps and sealing cracks on hot parts such as mufflers and tailpipes.
Key features
- Tensile strength 4000 PSI.
- Sets in 1 hour. Full cure in 8 hours.
- Cures grey.
- Heat resistance to 260°C.
- Fuel resistant.
Suitable surfaces
- Best on metal, stone and concrete.
- Also bonds fibreglass and ceramic.
Specifications
| Part number | 8297 |
|---|---|
| Pack | 57 g |
| Tensile strength | 4000 PSI |
| Set time | 1 hour |
| Full cure | 8 hours |
| Cure colour | Grey |
| Heat resistance | 260°C |
How to use
Mix the stick by hand until the colour is uniform, then press or mould it into the crack, gap or hole. Once cured it can be sanded, drilled, tapped and painted.
Surface preparation
Clean the repair area with detergent or a degreaser, then roughen it with a file or coarse sandpaper.
Documents
Description
HighHeat putty is a 57 g hand-mixable epoxy for filling gaps and sealing cracks on hot parts such as mufflers and tailpipes.
Key features
- Tensile strength 4000 PSI.
- Sets in 1 hour. Full cure in 8 hours.
- Cures grey.
- Heat resistance to 260°C.
- Fuel resistant.
Suitable surfaces
- Best on metal, stone and concrete.
- Also bonds fibreglass and ceramic.
Specifications
| Part number | 8297 |
|---|---|
| Pack | 57 g |
| Tensile strength | 4000 PSI |
| Set time | 1 hour |
| Full cure | 8 hours |
| Cure colour | Grey |
| Heat resistance | 260°C |
How to use
Mix the stick by hand until the colour is uniform, then press or mould it into the crack, gap or hole. Once cured it can be sanded, drilled, tapped and painted.
Surface preparation
Clean the repair area with detergent or a degreaser, then roughen it with a file or coarse sandpaper.
Documents
Recently viewed products
Download A Class App
- Choosing a selection results in a full page refresh.
- Opens in a new window.