Your cart
Your cart is empty
JB Weld Plasticweld Epoxy Putty Stick
$26.50
Pay with
$26.50
$26.50
PlasticWeld putty is a 57 g hand-mixable epoxy for filling gaps, sealing cracks and repairing most plastics.
Key features
- Tensile strength 700 PSI.
- Sets in 25 minutes. Full cure in 4 hours.
- Cures white.
- Can be sanded and painted.
- Heat resistance to 93°C.
Suitable surfaces
- Most flexible or rigid plastics.
- Also bonds fibreglass, ceramic and metal.
- Not for polypropylene or polyethylene.
Specifications
| Part number | 8237AP |
|---|---|
| Pack | 57 g |
| Tensile strength | 700 PSI |
| Set time | 25 minutes |
| Full cure | 4 hours |
| Cure colour | White |
| Heat resistance | 93°C |
How to use
Mix the stick by hand until the colour is uniform, then press or mould it into the crack, gap or hole. Once cured it can be sanded, drilled, tapped and painted.
Surface preparation
Clean the repair area with detergent or a degreaser, then roughen it with a file or coarse sandpaper.
Documents
Description
PlasticWeld putty is a 57 g hand-mixable epoxy for filling gaps, sealing cracks and repairing most plastics.
Key features
- Tensile strength 700 PSI.
- Sets in 25 minutes. Full cure in 4 hours.
- Cures white.
- Can be sanded and painted.
- Heat resistance to 93°C.
Suitable surfaces
- Most flexible or rigid plastics.
- Also bonds fibreglass, ceramic and metal.
- Not for polypropylene or polyethylene.
Specifications
| Part number | 8237AP |
|---|---|
| Pack | 57 g |
| Tensile strength | 700 PSI |
| Set time | 25 minutes |
| Full cure | 4 hours |
| Cure colour | White |
| Heat resistance | 93°C |
How to use
Mix the stick by hand until the colour is uniform, then press or mould it into the crack, gap or hole. Once cured it can be sanded, drilled, tapped and painted.
Surface preparation
Clean the repair area with detergent or a degreaser, then roughen it with a file or coarse sandpaper.
Documents
Recently viewed products
Download A Class App
- Choosing a selection results in a full page refresh.
- Opens in a new window.