Your cart
Your cart is empty
$17.50
$17.50
TankWeld is a 28 g hand-mixable epoxy putty for sealing holes in metal tanks that hold water, fuel or other chemicals.
Key features
- Tensile strength 4000 PSI.
- Sets in 5 minutes. Full cure in 1 hour.
- Cures grey.
- Fuel resistant.
- Heat resistance to 176°C.
Suitable surfaces
- Best on metal.
- Also bonds fibreglass and rigid plastics.
- Not for polypropylene or polyethylene.
Specifications
| Part number | 8217 |
|---|---|
| Pack | 28 g |
| Tensile strength | 4000 PSI |
| Set time | 5 minutes |
| Full cure | 1 hour |
| Cure colour | Grey |
| Heat resistance | 176°C |
How to use
Mix the stick by hand until the colour is uniform, then press or mould it into the crack, gap or hole. Once cured it can be sanded, drilled, tapped and painted.
Surface preparation
Clean the repair area with detergent or a degreaser, then roughen it with a file or coarse sandpaper.
Documents
Description
TankWeld is a 28 g hand-mixable epoxy putty for sealing holes in metal tanks that hold water, fuel or other chemicals.
Key features
- Tensile strength 4000 PSI.
- Sets in 5 minutes. Full cure in 1 hour.
- Cures grey.
- Fuel resistant.
- Heat resistance to 176°C.
Suitable surfaces
- Best on metal.
- Also bonds fibreglass and rigid plastics.
- Not for polypropylene or polyethylene.
Specifications
| Part number | 8217 |
|---|---|
| Pack | 28 g |
| Tensile strength | 4000 PSI |
| Set time | 5 minutes |
| Full cure | 1 hour |
| Cure colour | Grey |
| Heat resistance | 176°C |
How to use
Mix the stick by hand until the colour is uniform, then press or mould it into the crack, gap or hole. Once cured it can be sanded, drilled, tapped and painted.
Surface preparation
Clean the repair area with detergent or a degreaser, then roughen it with a file or coarse sandpaper.
Documents
Recently viewed products
Download A Class App
- Choosing a selection results in a full page refresh.
- Opens in a new window.