Monkey Grip 50mm Transport Tie Down 2500kg LC 9m Trade Pack Hook & Keeper TTD509-B

This listing is the 9m Trade Pack - Best Value.

The Monkey Grip 50mm Transport Tie Down is built for commercial transport, trucks, machinery, pallets, IBC containers, timber and bulky freight.

With 2500kg Lashing Capacity, 50mm UV resistant polyester webbing and AS/NZS: 4380 compliance, it is the highest-capacity option in the Monkey Grip Transport Tie Down range.

Choose the 50mm option when the job calls for wider webbing, higher Lashing Capacity and serious load restraint across larger transport loads.

The protective sleeve helps reduce strap wear and damage, while Hook & Keeper end fittings provide a secure connection to suitable anchor points.

Webbing tie downs are lightweight, easy to handle and less likely to damage cargo or paintwork compared to chains. Their controlled stretch also helps maintain tension during transport.

This tie down is designed, manufactured and tested to conform to AS/NZS: 4380. The Lashing Capacity is printed on the strap webbing for clear identification.

Best for: commercial transport, trucks, machinery, pallets, IBC containers, timber and bulky freight

Lashing Capacity: 2500kg LC

Breaking Strength: 5000kg

Webbing Width: 50mm

End Fittings: Hook & Keeper

Compliance: AS/NZS: 4380

Features

Built for Commercial Transport

• Choose the 50mm option when the job calls for wider webbing, higher Lashing Capacity and serious load restraint across larger transport loads.
• The protective sleeve helps reduce strap wear and damage, while Hook & Keeper end fittings provide a secure connection to suitable anchor points.

Why Use Webbing Tie Downs?

• Webbing tie downs are lightweight, easy to handle and less likely to damage cargo or paintwork compared to chains. Their controlled stretch also helps maintain tension during transport.

AS/NZS 4380 Compliant

• This tie down is designed, manufactured and tested to conform to AS/NZS: 4380. The Lashing Capacity is printed on the strap webbing for clear identification.

Product Details

Australian Standards

Tie downs & Straps

Transport Tie Downs and Tie Downs are manufactured to our specifications and comply with: Australian Standards / New Zealand Standards AS/NZS 4380:2001 Motor vehicles—Cargo restraint systems—Transport webbing and components.

Bungees

Bungee straps/Octopus Straps comply with: Consumer Goods (Elastic luggage straps) Safety Standard 2017.

Safety Information

WARNING: DO NOT EXCEED LASHING CAPACITY (shown in kilograms (KG) on the front of each pack)

Key Information

Selection & Use

• Choose a lashing capacity (LC) appropriate to the mode of use and the nature of the load.
• Pre-tension lashings and check them regularly during the journey.

Material

• Strap is Polyester (PES) and not resistant to chemical attack.
• Chemical effects may increase with temperature and can cause restraint failure.
• If any chemical contact/contamination occurs, remove the web lashing from service and dispose of it.

Operating Temperatures

• Suitable range: -40 °C to 100 °C (per standard).
• Ranges may vary in chemical environments.
• Temperature changes can affect webbing force—check tension after entering warm areas.

Protection & Limit of Twist

• Protect against friction, abrasion, and edges with radius < 2× webbing thickness (use sleeves/corner protectors).
• Do not use webbing restraints when knotted.

Storage & Maintenance

• If saturated, dry in a shaded area before storing.
• Lightly lubricate the ratchet mechanism as needed.
• Store in a dry location when not in use.

Meanings relating to a webbing restraint system

• Lashing Capacity (LC): Half of the minimum breaking strength in straight pull, expressed in kilograms (kg).
• Fixed End Length (Lgf): The webbing end with the tensioning device; a fixed end length.
• Adjustable End Length (Lgl): The length of webbing without the tensioning device; an adjustable end length.
• Hook & Keeper / S Hook / Carabiner Hook: The end fittings used on the restraint system.

Warranty

Monkey Grip offers a 365-day warranty on all our products, within 365 days from purchase date and will either credit, replace, or refund the faulty or defective product. The warranty covers all manufacturing faults and defects. It does not cover wear and tear, or damage caused by misuse, accident, or failure to follow instructions. Please note any modifications made to the product will void the warranty.