Twice the strength of standard Rapid Set Concrete Mix
No mixing required - Just add water
Formulated for those demanding jobs were strengthand speed is required
Description
Made right here in Australia, Cement Australia's PROSTRENGTH® Rapid Set Concrete is designed to harden rapidly and deliver 40MPa* - twice the strength of a standard rapid set mix . Ideal for those more demanding jobs where higher strength is specified. Suitable for professional fencing, gates, commercial signs, retaining walls, sporting equipment installations and general building site and home projects.
Additional Information
Limitations
Concrete is not recommended for use with aluminium posts or poles unless these are primed or sealed according to the post manufacturers’ recommendation.
Extreme temperatures will impact set time of PROStrength® Rapid Set Concrete. Not recommended for use below 10°C and above 35°C
Do not add additional cement, sand, other aggregates or admixtures to the mix.
The use of concrete mixers or tools to mix the material should be avoided as this product hardens quickly.
Hints & Tips
Excess water will reduce the ultimate strength performance of this product.
It is important that you are prepared to complete the project quickly as this product has fast setting properties.
When using for posts, pre wet the hole if dry.
Hot temperatures will impact set times, avoid working in direct sunlight.
Clean all tools and equipment with water without delay after use
