Collated Nails & Screws

Paslode C50 stainless steel C-series brad nails. These 16 gauge stainless steel straight brads resist rusting and are supplied 2000 per box for finishing and trim applications.

Features

• Stainless steel construction resists rusting
• 16 gauge C-series straight brad
• 2000 brads per box

Specifications

Paslode C38 stainless steel C-series brad nails. These 16 gauge stainless steel straight brads resist rusting and are supplied 2000 per box for finishing and trim applications.

Features

• Stainless steel construction resists rusting
• 16 gauge C-series straight brad
• 2000 brads per box

Specifications

Paslode C25 stainless steel C-series brad nails. These 0-degree, 16 gauge stainless steel fasteners resist rusting and are supplied 2000 per box for finishing and trim work.

Features

• Stainless steel construction resists rusting
• 16 gauge, 0-degree straight collation
• 2000 brads per box

Specifications

Paslode 25mm C Series straight brads with a lost head and zinc-plated finish, supplied in a 3000 pack. These 16-gauge brads suit the Paslode T250 C Series bradder for trim and finishing work.

Features

• 25mm length
• Lost head for a clean finish
• Zinc plated for corrosion resistance
• 3000 brads per box

Specifications

Paslode 50mm C1 Series straight brads (1.2mm) with a galvanised finish, supplied in a 5000 pack. Suited to 18-gauge pneumatic brad nailing for fine trim and finishing work.

Features

• 50mm length
• 1.2mm diameter
• Lost head for a clean finish
• Galvanised for corrosion resistance
• 5000 brads per box

Specifications

Paslode 40mm C1 Series straight brads with a lost (countersunk) head and zinc-plated finish, supplied in a 5000 pack. Suited to 18-gauge pneumatic brad nailing for fine trim and finishing work.

Features

• 40mm length
• Lost head for a clean finish
• Zinc plated for corrosion resistance
• 5000 brads per box

Specifications

Paslode 30mm C1 Series straight brads with a lost (countersunk) head and zinc-plated finish, supplied in a 5000 pack. Suited to 18-gauge pneumatic brad nailing for fine trim and finishing work.

Features

• 30mm length
• Lost head for a clean finish
• Zinc plated for corrosion resistance
• 5000 brads per box

Specifications

Paslode 25mm C1 Series straight brads with a lost (countersunk) head and zinc-plated finish, supplied in a 5000 pack. Suited to 18-gauge pneumatic brad nailing for fine trim and finishing work.

Features

• 25mm length
• Lost head for a clean finish
• Zinc plated for corrosion resistance
• 5000 brads per box

Specifications

Paslode hot dip galvanised D-head framing nails that drive straight and true regardless of timber density. The galvanised coating provides corrosion resistance for external and treated-timber framing, supplied as a 34-degree collated strip.

Features

• Hot dip galvanised for corrosion resistance
• Drives straight and true across varying timber densities
• D-head, smooth shank
• 34-degree strip collation for high-speed firing

Specifications

Paslode bright steel D-head framing nails made from top-quality steel that drive straight and true regardless of timber density. Supplied as a 34-degree collated strip for high-speed framing with Paslode pneumatic framing nailers.

Features

• Drives straight and true across varying timber densities
• High withdrawal resistance
• Bright steel, smooth shank, D-head
• 34-degree strip collation for high-speed firing

Specifications

Paslode 90 x 3.15mm hot dipped galvanised D-head impulse framing nails in a 3000-nail value pack with 3 fuel cells. Smooth-shank 34-degree galvanised nails for framing and structural timber work.

Features

• Hot dipped galvanised finish
• D-head design
• Smooth shank
• 34-degree collation
• 3000 nails per pack
• Includes 3 fuel cells

Specifications

Paslode 90 x 3.15mm hot dipped galvanised D-head impulse framing nails in a 1000-nail handy pack with fuel cell. Smooth-shank galvanised nails for framing and structural timber fastening.

Features

• Hot dipped galvanised finish
• D-head design
• Smooth shank
• 1000 nails per box
• Includes fuel cell

Specifications

Paslode 90 x 3.15mm bright D-head collated framing nails in a 1000-nail handy pack with fuel cell. These 34-degree smooth-shank impulse nails are made for gas-powered framing and general structural timber fastening.

Features

• Bright finish
• D-head design
• Smooth shank
• 34-degree collation
• 1000-nail handy pack
• Includes fuel cell

Specifications

Paslode 82 x 3.15mm hot dipped galvanised D-head impulse framing nails in a 1000-nail handy pack with fuel cell. Smooth-shank nails engineered for framing where corrosion resistance is required.

Features

• Hot dipped galvanised finish for rust protection
• D-head design for holding power
• Smooth shank
• 1000 nails per box
• Includes fuel cell

Specifications

Paslode Impulse 82mm x 3.15mm bright D-head framing nails, value pack of 3000 strip nails supplied with 3 fuel cells. The 34-degree, strong-steel D-head fasteners suit the Paslode Impulse FrameMaster and FrameMaster-Li framing nailers.

Features

• 3000 strip nails plus 3 fuel cells
• 82mm x 3.15mm bright finish
• 34-degree D-head
• Strong steel construction
• For Paslode Impulse FrameMaster / FrameMaster-Li

Specifications

Paslode 75mm bright steel D-head pneumatic framing nails, manufactured from top-quality steel so they drive straight and true regardless of timber density. Superior collation keeps the nails aligned for high-speed firing and gives ultra-high withdrawal resistance.

Features

• Drives straight and true across varying timber densities
• Ultra-high withdrawal resistance
• Bright steel, smooth shank with diamond point
• D-head strip collation for high-speed firing

Specifications

Paslode bright steel D-head framing nails made from top-quality steel that drive straight and true regardless of timber density. Supplied as a 34-degree collated strip for high-speed framing with Paslode pneumatic framing nailers.

Features

• Drives straight and true across varying timber densities
• High withdrawal resistance
• Bright steel, smooth shank, D-head
• 34-degree strip collation for high-speed firing

Specifications

Paslode hot dip galvanised D-head framing nails that drive straight and true regardless of timber density. The galvanised coating provides corrosion resistance for external and treated-timber framing, supplied as a 34-degree collated strip in a 3000 nail box.

Features

• Hot dip galvanised for corrosion resistance
• Drives straight and true across varying timber densities
• D-head, smooth shank
• 34-degree strip collation for high-speed firing

Specifications

Paslode Impulse gun nails value pack: 3000 x 75mm x 3.06mm bright D-head smooth-shank strip nails with 3 fuel cells. Made from superior steel with a diamond point to drive consistently through varying timber densities.

Features

• 3000 D-head strip nails plus 3 fuel cells
• 75mm length, 3.06mm diameter
• Smooth shank, diamond point
• Bright finish
• For Paslode Impulse FrameMaster / FrameMaster-Li

Specifications

Paslode 75 x 3.06mm hot dipped galvanised D-head impulse framing nails in a 3000-nail value pack with 3 fuel cells. Smooth-shank galvanised framing nails for construction and structural timber fastening.

Features

• Hot dipped galvanised finish
• D-head design
• Smooth shank
• 3000 nails per pack
• Includes 3 fuel cells

Specifications

Paslode 75 x 3.06mm hot dipped galvanised D-head impulse framing nails in a 1000-nail handy pack. Smooth-shank fasteners with a corrosion-resistant galvanised coating for framing and construction.

Features

• Hot dipped galvanised finish
• D-head design
• Smooth shank
• 1000 nails per pack
• Corrosion resistant

Specifications

Paslode 75 x 3.06mm bright D-head impulse framing nails in a 1000-nail handy pack with fuel cell. A 34-degree, smooth-shank fastener suited to framing and general timber fastening.

Features

• Bright finish
• D-head fastener
• Smooth shank
• 34-degree angle
• 1000 nails per pack
• Includes fuel cell

Specifications

Paslode 65mm C65 Impulse zinc plated brads. A 0-degree, 16 gauge fastener suited to the Paslode TrimMaster 16ga straight bradder, with a zinc plated finish for corrosion resistance.

Features

• 16 gauge C series straight brad
• Zinc plated finish
• 3000 brads per pack with fuel
• Suits Paslode Impulse Straight TrimMaster B20710

Specifications

Paslode 63mm 16 gauge zinc-plated angled C brad nails for the Impulse TrimMaster cordless bradder, supplied as a 2000 pack with two fuel cells. Manufactured to strict quality control standards for a wide range of finishing applications.

Features

• 16 gauge brad nail
• 63mm length
• Smooth shank
• Chisel point
• Zinc plated finish
• 20-degree collation angle
• Includes 2 fuel cells
• 2000 nails per pack

Specifications

Paslode 52mm x 2.5mm hot dipped galvanised dome-head ring shank 15-degree plastic-collated coil nails for pneumatic coil nailers. The dome head and ring shank give strong holding power and the hot dipped galvanised finish provides corrosion resistance.

Features

• 52mm ring shank coil nail
• 2.5mm shank diameter
• Dome head
• Hot dipped galvanised finish
• 15-degree plastic collation

Specifications

Paslode hot dip galvanised D-head framing nails that drive straight and true regardless of timber density. The galvanised coating provides corrosion resistance for external and treated-timber framing, supplied as a 34-degree collated strip.

Features

• Hot dip galvanised for corrosion resistance
• Drives straight and true across varying timber densities
• D-head, smooth shank
• 34-degree strip collation for high-speed firing

Specifications

Paslode bright steel D-head framing nails made from top-quality steel that drive straight and true regardless of timber density. Supplied as a 34-degree collated strip for high-speed framing with Paslode pneumatic framing nailers.

Features

• Drives straight and true across varying timber densities
• High withdrawal resistance
• Bright steel, smooth shank, D-head
• 34-degree strip collation for high-speed firing

Specifications

Paslode 50 x 2.5mm ring-shank, hot dipped galvanised 0-degree collated coil nails supplied with fuel cells for the cordless Paslode Impulse CoilMaster. Suited to cladding, plywood and ply bracing.

Features

• 0-degree collated coil nails
• Ring shank for high withdrawal resistance
• Hot dipped galvanised finish
• Supplied with 3 fuel cells
• For cladding, plywood and ply bracing

Specifications

Paslode 50mm C Series stainless steel straight brads, a 16 gauge lost head fastener offering corrosion resistance for exterior and coastal finishing. Supplied as a fuel pack for the Paslode gas TrimMaster bradder.

Features

• 16 gauge C series straight brad
• Stainless steel for corrosion resistance
• Lost head for a clean finish
• 2000 brads per box
• Includes 2 fuel cells
• Suits Paslode Impulse Straight TrimMaster B20710

Specifications

Paslode 50mm x 1.6mm C Series galvanised straight brads, supplied in a 3000 pack. These 16-gauge brads suit the Paslode T250 C Series bradder for trim and finishing work.

Features

• 50mm length
• 1.6mm diameter
• Galvanised for corrosion resistance
• Lost head for a clean finish
• 3000 brads per box

Specifications

Paslode 50mm C50 Impulse zinc plated brads. A 0-degree, 16 gauge fastener with a smooth shank and chisel point, designed for the Paslode TrimMaster 16ga straight bradder and supplied with three fuel cells.

Features

• 16 gauge straight brad
• Smooth shank with chisel point
• Zinc plated finish
• 3000 nails per pack
• Includes 3 fuel cells
• Suits Paslode Impulse Straight TrimMaster B20710

Specifications

Paslode 50mm DA angle brad nails in a bright finish, supplied in a 3000 pack. These 15-gauge angled clip-head brads suit Paslode DA angled bradders for finishing and trim work.

Features

• 50mm length
• Bright finish
• Clip head design
• DA angled collation
• 3000 brads per box

Specifications

Paslode 50mm 16 gauge zinc-plated angled C brad nails for the Impulse TrimMaster cordless bradder, supplied as a 2000 pack with two fuel cells. Zinc-plated for corrosion resistance and suited to general finishing applications.

Features

• 16 gauge brad nail
• Smooth shank
• Chisel point
• Zinc plated for corrosion resistance
• 20-degree collation angle
• Includes 2 fuel cells
• 2000 nails per pack

Specifications

Paslode 50mm 16 gauge stainless steel angled brad nails for the Impulse TrimMaster cordless bradder, supplied as a 2000 pack. The stainless steel finish suits exterior and corrosion-prone finishing applications.

Features

• 16 gauge angled brad
• Stainless steel construction
• 2000 brads per pack
• Suited to corrosion-prone applications

Specifications

Paslode 50 x 2.87mm hot dipped galvanised D-head impulse nails in a 1000-nail handy pack. Smooth-shank framing nails with a corrosion-resistant galvanised finish for use with Paslode gas framing nailers.

Features

• Hot dipped galvanised finish
• D-head design
• Smooth shank
• 1000 nails per box
• Corrosion resistant

Specifications

Paslode 50 x 2.5mm ring-shank stainless steel collated coil nails for the cordless Paslode Impulse CoilMaster. Manufactured from high quality stainless steel to drive straight and true regardless of timber density, with ultra-high withdrawal resistance.

Features

• Ring shank for high withdrawal resistance
• Stainless steel construction
• Superior collation keeps nails aligned at speed
• Drives straight regardless of timber density

Specifications

Paslode 45mm 16 gauge zinc-plated angled brad nails for the Impulse TrimMaster cordless bradder, supplied as a 2000 pack with two fuel cells. Made to strict quality control standards for reliable finishing work.

Features

• 16 gauge angled brad
• Smooth shank
• Zinc plated finish
• Includes 2 fuel cells
• 2000 nails per pack

Specifications

Paslode 15 gauge 45mm steel frame brads designed to fix mouldings into light-gauge steel frame houses without gluing or screwing. The round shank, conical point and specially formulated resin give extra hold in steel, supplied as a box of 2000.

Features

• 15 gauge steel frame brad
• Round shank with conical point
• Special resin coating for extra hold in steel
• Holds stronger in steel than a 16ga C brad in timber
• 2000 brads per box

Specifications

Paslode 45mm x 1.6mm C Series (C45) galvanised straight brads, supplied in a 3000 pack. These 16-gauge brads suit the Paslode T250 C Series bradder for trim and finishing work.

Features

• 45mm length
• 1.6mm diameter
• Galvanised for corrosion resistance
• Lost head for a clean finish
• 3000 brads per box

Specifications

Paslode 45mm DA angle brad nails in a bright finish, supplied in a 3000 pack. These 15-gauge angled clip-head brads suit Paslode DA angled bradders for finishing and trim work.

Features

• 45mm length
• Bright finish
• Clip head design
• DA angled collation
• 3000 brads per box

Specifications