Collated Nails & Screws

Paslode 38mm 16 gauge stainless steel angled brad nails for the Impulse TrimMaster cordless bradder, supplied as a 2000 pack with fuel cells. The stainless steel construction suits exterior and corrosion-prone finishing applications.

Features

• 16 gauge angled brad
• Stainless steel construction
• Lost head
• Includes 2 fuel cells
• 2000 brads per box
• Suited to corrosion-prone applications

Specifications

Paslode 38mm C38 Impulse zinc plated brads, manufactured under strict quality control for finishing applications. A 0-degree, 16 gauge straight brad supplied with three fuel cells for the Paslode gas TrimMaster bradder.

Features

• 16 gauge straight brad
• Zinc plated finish
• Smooth shank with chisel point
• 3000 nails per pack
• Includes 3 fuel cells
• Suits Paslode Impulse Straight TrimMaster B20710

Specifications

Paslode 38mm 16 gauge zinc-plated angled brad nails for the Impulse TrimMaster cordless bradder, supplied as a 2000 pack with two fuel cells. Manufactured to strict quality control standards and suited to a wide range of finishing applications.

Features

• 16 gauge angled brad
• Smooth shank
• Chisel point
• Zinc plated finish
• 20-degree collation angle
• Includes 2 fuel cells
• 2000 nails per pack

Specifications

Paslode 38mm DA angle brad nails in a bright finish, supplied in a 3000 pack. These 15-gauge angled clip-head brads suit Paslode DA angled bradders for finishing and trim work.

Features

• 38mm length
• Bright finish
• Clip head design
• DA angled collation
• 3000 brads per box

Specifications

Paslode ND38 stainless steel straight brads, 38mm long and 2.0mm (14 gauge) diameter. The stainless steel construction resists corrosion for external and treated-timber finishing, supplied in a box of 2000.

Features

• 38mm ND Series straight brad
• Stainless steel for corrosion resistance
• Box of 2000

Specifications

Paslode 32mm x 2.7mm hot dipped galvanised plastic-collated coil nails for pneumatic coil nailers. The hot dipped galvanised coating provides corrosion resistance for exterior and treated-timber fixing.

Features

• 32mm coil nail
• 2.7mm shank diameter
• Hot dipped galvanised finish
• 15-degree plastic collation
• Corrosion resistant

Specifications

Paslode 32mm x 2.5mm electro galvanised screw-hardened 15-degree plastic-collated coil nails for pneumatic coil nailers. The hardened screw shank improves grip and drive performance in dense material.

Features

• 32mm screw-hardened coil nail
• 2.5mm shank diameter
• Electro galvanised finish
• Hardened screw shank
• 15-degree plastic collation

Specifications

Paslode 32mm C Series straight brads with a lost head and galvanised finish, supplied in a 3000 pack. These 16-gauge brads suit the Paslode T250 C Series bradder for trim and finishing work.

Features

• 32mm length
• Lost head for a clean finish
• Galvanised for corrosion resistance
• 3000 brads per box

Specifications

Paslode 32mm DA angle brad nails in a bright finish, supplied in a 3000 pack. These 15-gauge angled clip-head brads suit Paslode DA angled bradders for finishing and trim work.

Features

• 32mm length
• Bright finish
• Clip head design
• DA angled collation
• 3000 brads per box

Specifications

Paslode 32mm C Series 20-degree angled brads, a 16 gauge galvanised fastener supplied as a fuel pack for the Paslode gas angled TrimMaster bradder. The angled collation gives access to tight corners for finishing work.

Features

• 16 gauge angled C series brad
• 20 degree collation for tight access
• Galvanised (zinc plated) finish
• 2000 brads per pack
• Includes 2 fuel cells
• Suits Paslode Impulse Angled TrimMaster bradder

Specifications

Paslode 32mm x 2.7mm hot dipped galvanised ring shank plastic-collated coil nails for pneumatic coil nailers. The ring shank adds holding power and the hot dipped galvanised coating gives corrosion resistance.

Features

• 32mm ring shank coil nail
• 2.7mm shank diameter
• Hot dipped galvanised finish
• Ring shank for extra hold
• 15-degree plastic collation

Specifications

Paslode 32 x 2.7mm smooth-shank, hot dipped galvanised 0-degree collated coil nails supplied with fuel cells for the cordless Paslode Impulse CoilMaster. Suited to cladding applications.

Features

• 0-degree collated coil nails
• Smooth shank
• Hot dipped galvanised finish
• Supplied with 3 fuel cells
• For cladding

Specifications

Paslode 32 x 2.5mm screw-hardened, electro galvanised 0-degree collated coil nails supplied with fuel cells for the cordless Paslode Impulse CoilMaster. Used for coil-based fastening applications such as cladding.

Features

• 0-degree collated coil nails
• Screw-hardened shank
• Electro galvanised finish
• Supplied with 3 fuel cells

Specifications

Paslode 32mm C32 Impulse galvanised brads for the Paslode gas TrimMaster straight bradder. Ideal for a wide range of finishing applications including skirting, architraves, panelling and mouldings. Supplied as a fuel pack with brads and fuel cells.

Features

• 16 gauge C series straight brad
• Zinc plated (galvanised) for corrosion resistance
• Smooth shank with chisel point
• 3000 brads per pack with fuel
• Suits Paslode Impulse Straight TrimMaster

Specifications

Paslode 27mm x 2.5mm electro galvanised ring shank plastic-collated coil nails for pneumatic coil nailers. The ring shank and round head provide added holding power for sheet and general fixing applications.

Features

• 27mm ring shank coil nail
• 2.5mm shank diameter
• Electro galvanised finish
• Round head
• Plastic collated for coil nailers

Specifications

Paslode 27 x 2.5mm ring-shank, hot dipped galvanised coil nails designed specifically for thin fibre cement sheets. The modified head and shank give enhanced holding power in 4.5mm and 6mm fibre cement for applications such as soffits, eaves lining and tile underlay.

Features

• Ring shank with round head and diamond tip
• Hot dipped galvanised finish
• Designed for thin (4.5mm and 6mm) fibre cement
• For soffits, eaves lining and tile underlay
• Supplied with 3 fuel cells

Specifications

Paslode 25mm C Series stainless steel straight brads, a 16 gauge lost head fastener offering corrosion resistance for exterior and coastal finishing. Supplied as a fuel pack for the Paslode gas TrimMaster bradder.

Features

• 16 gauge C series straight brad
• Stainless steel for corrosion resistance
• Lost head for a clean finish
• 2000 nails per box
• Includes 2 fuel cells
• Suits Paslode Impulse Straight TrimMaster B20710

Specifications

Paslode 25 x 1.6mm C25 zinc plated impulse brads in a 3000-pack with fuel cell. 16-gauge galvanised brad nails for interior finishing, trim and light fixing with Paslode Impulse brad nailers.

Features

• Zinc plated / galvanised finish
• 16 gauge brad
• C-series collation
• 3000 brads per pack
• Includes fuel cell

Specifications