The MFD Hex Flange Head C3 Galvanised Masonbolt M10-12 x 65mm (Box of 50) is engineered for secure, heavy-duty anchoring in masonry and concrete, delivering reliable performance where strong, permanent fixings are essential.

Key Features

• Application suitability – Ideal for anchoring structural fixtures, brackets, and heavy equipment into masonry and concrete substrates.
• Design – Hex flange head provides excellent load distribution and grip, allowing high tightening torque and a clean, low-profile finish.
• Material quality – Manufactured from high-grade steel for consistent strength, reliability, and performance under demanding loads.
• Durability – C3 galvanised coating offers robust corrosion resistance, extending service life in standard and mildly corrosive environments.
• Installation – Designed for straightforward installation with standard tools, ensuring fast, secure fixing with minimal preparation.
• Maintenance – Low-maintenance solution that retains clamping force over time, reducing the need for periodic retightening.
• Versatility – M10-12 x 65mm size and box of 50 make it suitable for a wide range of commercial, industrial, and trade applications.

[additional]

The MFD Hex Flange Head C3 Galvanised Masonbolt M10-12 x 100mm (Box of 25) is engineered for secure, heavy-duty anchoring in masonry and concrete, delivering reliable performance where strong, permanent fixings are essential.

Key Features

• Application suitability – Ideal for anchoring structural fixtures, brackets, and heavy equipment into masonry and concrete substrates.
• Design – Hex flange head provides excellent load distribution and grip, allowing high tightening torque and a clean, low-profile finish.
• Material quality – Manufactured from high-grade steel for consistent strength, reliability, and performance under demanding loads.
• Durability – C3 galvanised coating offers robust corrosion resistance, extending service life in standard and mildly corrosive environments.
• Installation – Designed for straightforward installation with standard tools, ensuring fast, secure fixing with minimal preparation.
• Maintenance – Low-maintenance solution that retains clamping force over time, reducing the need for periodic retightening.
• Versatility – M10-12 x 100mm size and box of 25 make it suitable for a wide range of commercial, industrial, and trade applications.

[additional]

HEX Flange Galvanised Masonbolt M8-10x60mm (Box of 50) is a heavy-duty masonry anchor designed for securely fastening fixtures to concrete, brick, and block in demanding construction and renovation projects. Ideal for structural fixings, frames, brackets, and heavy equipment where strength and reliability are critical.

Key Features

• Application suitability – Engineered for secure anchoring in solid concrete, brick, and block for both commercial and residential projects.
• Design – Hex flange head provides excellent load distribution and grip, ensuring a stable, flush, and secure fixing.
• Material quality – Manufactured from high-grade steel for consistent performance under high load conditions.
• Durability – Galvanised coating offers strong corrosion resistance, extending service life in indoor and sheltered outdoor environments.
• Installation – Through-fixing design with M8-10x60mm dimensions allows quick, straightforward installation using standard tools.
• Maintenance – Low-maintenance solution that retains clamping force and reliability over time with minimal inspection.
• Versatility – Supplied in a box of 50, ideal for bulk use on site for fixing frames, rails, brackets, machinery, and other heavy fixtures.

[additional]

HEX Flange Galvanised Masonbolt M18-10x97mm (Box of 25) is a heavy-duty masonry anchor designed for securely fastening fixtures to concrete, brick, and block in demanding construction and renovation projects. Ideal for structural fixings, frames, brackets, and heavy equipment where strength and reliability are critical.

Key Features

• Application suitability – Engineered for secure anchoring in solid concrete, brick, and block for both commercial and residential projects.
• Design – Hex flange head provides excellent load distribution and grip, ensuring a stable, flush, and secure fixing.
• Material quality – Manufactured from high-grade steel for consistent performance under high load conditions.
• Durability – Galvanised coating offers strong corrosion resistance, extending service life in indoor and sheltered outdoor environments.
• Installation – Through-fixing design with M8-10x97mm dimensions allows quick, straightforward installation using standard tools.
• Maintenance – Low-maintenance solution that retains clamping force and reliability over time with minimal inspection.
• Versatility – Supplied in a box of 25, ideal for bulk use on site for fixing frames, rails, brackets, machinery, and other heavy fixtures.

[additional]

MFD Decking Countersunk Ribs Head Square Drive Type 17 304 Stainless Steel Screws 10g x 50mm (Box of 1000) are engineered for long-lasting, rust-resistant fixing in timber decking and outdoor carpentry, providing secure, clean finishes that stand up to the elements.

Key Features

• Application suitability – Ideal for timber decking, pergolas, fencing, and general exterior carpentry where strong, reliable fixing is essential.
• Design – Countersunk ribs head seats neatly below the timber surface for a flush, professional finish with reduced timber splitting.
• Material quality – Manufactured from 304 stainless steel for excellent corrosion resistance in outdoor and coastal environments.
• Durability – Type 17 cutting point and robust 10g shank deliver high pull-out strength and long-term performance under load.
• Installation – Square drive recess provides positive bit engagement, reducing cam-out and making installation faster and easier.
• Maintenance – Rust-resistant stainless construction minimises staining and reduces the need for ongoing maintenance or replacement.
• Versatility – 50mm length suits a wide range of decking boards and exterior timber thicknesses, making it a go-to screw for multiple projects.

[additional]

MFD Decking Countersunk Ribs Head Square Drive Type 17 304 Stainless Steel Screws 10g x 65mm (Box of 500) are engineered for long-lasting, rust-resistant fixing in timber decking and outdoor carpentry, providing secure, clean finishes that stand up to the elements.

Key Features

• Application suitability – Ideal for timber decking, pergolas, fencing, and general exterior carpentry where strong, reliable fixing is essential.
• Design – Countersunk ribs head seats neatly below the timber surface for a flush, professional finish with reduced timber splitting.
• Material quality – Manufactured from 304 stainless steel for excellent corrosion resistance in outdoor and coastal environments.
• Durability – Type 17 cutting point and robust 10g shank deliver high pull-out strength and long-term performance under load.
• Installation – Square drive recess provides positive bit engagement, reducing cam-out and making installation faster and easier.
• Maintenance – Rust-resistant stainless construction minimises staining and reduces the need for ongoing maintenance or replacement.
• Versatility – 50mm length suits a wide range of decking boards and exterior timber thicknesses, making it a go-to screw for multiple projects.

[additional]

MFD Timber Bugle Head Hex Drive Type 17 Galvanised Batten Screws 14-10 x 75mm (Box of 1000) deliver strong, efficient fastening for timber framing, battens, and structural carpentry, providing high pull-out resistance and reliable performance on demanding jobs.

Key Features

• Application suitability – Ideal for fixing battens, decking, and structural timber where high holding power and clean finishes are required.
• Design – Bugle head and Type 17 self-drilling point minimise timber splitting and allow flush seating for a neat, professional result.
• Material quality – Manufactured from high-grade steel for consistent strength, load-bearing capacity, and long-term reliability.
• Durability – Heavy galvanised coating offers excellent corrosion resistance, making these screws suitable for exterior and exposed timber applications.
• Installation – Hex drive head provides positive bit engagement and reduced cam-out, enabling faster, easier installation with power drivers.
• Maintenance – Secure, long-lasting fixings reduce the need for re-tightening or replacement over time.
• Versatility – 14-10 x 75mm size and robust design suit a wide range of residential, commercial, and light industrial timber construction tasks.

[additional]

MFD Timber Bugle Head Hex Drive Type 17 Galvanised Batten Screws 12-11 x 50mm (Box of 500) deliver strong, efficient fastening for timber framing, battens, and structural carpentry, providing high pull-out resistance and reliable performance on demanding jobs.

Key Features

• Application suitability – Ideal for fixing battens, decking, and structural timber where high holding power and clean finishes are required.
• Design – Bugle head and Type 17 self-drilling point minimise timber splitting and allow flush seating for a neat, professional result.
• Material quality – Manufactured from high-grade steel for consistent strength, load-bearing capacity, and long-term reliability.
• Durability – Heavy galvanised coating offers excellent corrosion resistance, making these screws suitable for exterior and exposed timber applications.
• Installation – Hex drive head provides positive bit engagement and reduced cam-out, enabling faster, easier installation with power drivers.
• Maintenance – Secure, long-lasting fixings reduce the need for re-tightening or replacement over time.
• Versatility – 12-11 x 50mm size and robust design suit a wide range of residential, commercial, and light industrial timber construction tasks.

[additional]

Lawn U-Pins Pegs T17, the perfect solution for securing your landscaping materials with ease. These durable pegs are crafted from high-quality metal, designed to withstand the elements and provide long-lasting performance. Featuring a sturdy U-shape, they offer excellent grip in soil, ensuring that landscape fabric, tarps, and garden decorations stay firmly in place. Their lightweight design allows for easy insertion and removal, making adjustments in your garden setup a breeze. Ideal for both professional landscapers and DIY gardeners, these U-Pins are versatile and reliable, making them an essential tool for maintaining a well-organized outdoor space

[additional]

Galvanised Batten Screws 14-10x100mm (500 pcs box) are engineered for strong, corrosion-resistant fastening in timber construction and outdoor projects, providing reliable hold in demanding environments such as decks, pergolas, fencing, and structural framing.

Key Features

• Application suitability – Ideal for heavy-duty timber-to-timber connections in decking, roofing battens, landscaping, and general outdoor carpentry.
• Design – Precision-threaded shank and sharp point for fast bite, strong pull-down, and reduced timber splitting.
• Material quality – Manufactured from high-grade steel with a uniform galvanised coating for consistent performance.
• Durability – Galvanised finish offers excellent corrosion resistance, extending service life in exposed and high-moisture conditions.
• Installation – Compatible with standard power drivers; deep drive recess minimises cam-out and speeds up installation.
• Maintenance – Long-lasting protective coating reduces the need for frequent inspections or replacements.
• Versatility – Supplied in a bulk 500-piece box, suitable for both professional contractors and serious DIY users across multiple projects.

[additional]

The MFD countersunk ribbed head decking type 17 screws, 10 gauge by 50 mm, provide strong performance in decking applications. Their ribbed head enhances grip and prevents pull-through, while the type 17 point ensures easy penetration without pre-drilling. Supplied in a box of 1000, these screws are a cost-effective choice for both professionals and DIY projects, ensuring durability and strength.

[additional]

The MFD countersunk ribbed head decking type 17 screws, 10 gauge by 50 mm, provide strong performance in decking applications. Their ribbed head enhances grip and prevents pull-through, while the type 17 point ensures easy penetration without pre-drilling. Supplied in a box of 1000, these screws are a cost-effective choice for both professionals and DIY projects, ensuring durability and strength.

[additional]

Galvanized Screwbolt 10 x 100mm (50 pc box) is engineered for heavy-duty, corrosion-resistant anchoring in concrete, masonry, and other solid substrates, delivering secure, high-performance fixing in demanding environments.

Key Features

• Application suitability – Ideal for anchoring structural fixtures, brackets, and heavy equipment into concrete, brick, and solid block.
• Design – High-thread, self-tapping screwbolt profile provides strong mechanical interlock and high pull-out resistance.
• Material quality – Manufactured from high-grade steel with a uniform galvanized coating for reliable strength and protection.
• Durability – Corrosion-resistant finish ensures long service life in indoor and sheltered outdoor conditions.
• Installation – Fast, drill-and-drive installation with no need for plugs, allowing immediate load application once fixed.
• Maintenance – Secure, vibration-resistant hold minimizes the need for retightening or periodic adjustment.
• Versatility – Supplied in a 50-piece box for convenient use across multiple projects, from construction to heavy-duty maintenance.

[additional]

The 10x100 Screwbolt is a high-performance mechanical anchor designed for heavy-duty fixing into concrete, masonry, and other solid substrates, delivering secure, reliable hold for structural and safety-critical applications.

Key Features

• Application suitability – Engineered specifically for heavy-duty anchoring in concrete, brick, blockwork, and other solid base materials.
• Design – High-thread, self-tapping design cuts a clean, secure thread in the substrate for maximum pull-out resistance.
• Material quality – Manufactured from premium-grade steel for consistent strength and performance under high loads.
• Durability – Corrosion-resistant finish helps protect against rust and wear, extending service life in demanding environments.
• Installation – Simple drill-and-drive installation with no need for plugs, allowing fast, clean, and adjustable fixing.
• Maintenance – Removable and re-usable in the same hole (subject to inspection), simplifying adjustments and replacements.
• Versatility – Suitable for fixing brackets, frames, rails, machinery, and safety-critical components across a wide range of projects.

[additional]

The 10x40 CSK SQ DR Screw is designed for flush, secure fastening in timber and general construction, delivering strong hold with a clean, low-profile finish. Ideal for structural and finishing work, it combines reliable performance with easy, accurate installation.

Key Features

• Application suitability – Optimised for timber framing, decking, and general construction where a strong, neat fixing is required.
• Design – Countersunk head with square drive (CSK SQ DR) ensures a flush finish and excellent driver engagement to reduce cam-out.
• Material quality – Manufactured from high-grade steel for consistent strength and reliable load-bearing performance.
• Durability – Corrosion-resistant coating helps protect against rust and wear in demanding site and workshop conditions.
• Installation – Square drive recess provides positive bit grip for faster driving, reduced slippage, and improved control.
• Maintenance – Secure, long-lasting hold minimises the need for retightening or replacement over the life of the installation.
• Versatility – Suitable for use in softwood, most hardwoods, and composite timbers across structural, fit-out, and repair tasks.

[additional]

[additional]

The SQ2x50mm Square Power Drive Bit (Blister Pack) is a durable tool designed for use with power drills and impact drivers. Featuring a #2 square drive, it ensures a secure fit and reduces cam-out when driving screws. The 50mm length offers a good balance of reach and control. Made from hardened steel, it provides long-lasting performance and comes in a convenient blister pack for easy storage. Compatible with most drill systems, it’s ideal for construction, DIY projects, and general screw driving tasks.

[additional]

The HX5 Hex Power Standard Driver Bit - 5x50mm is a high-quality tool designed for driving hex screws. With a 5mm diameter and 50mm length, it provides a secure grip and efficient torque transfer. Made from hardened steel, it ensures durability and long-lasting performance. Ideal for power drills and impact drivers, this bit is perfect for construction, woodworking, and DIY projects.

[additional]