Products

[additional]

[additional]

[additional]

[additional]

Perfect for hardwood to softwood under-constructions.

Advantages

• Offers a high degree of weather resistance.
• The self-drilling tip makes installation quick and easy.
• Small head diameter and underhead pockets ensure the head can sink cleanly and easily.
• Timber is protected from tearing or splitting by the drill tip.
• Available in 304 and 316 stainless steel.
• Also available in a 304 vintage finish and 316 black finish.

Applications

• Terrace decking on timber substructures
• Cladding

Building Materials

• Accoya
• Merbau
• Spotted Gum
• Blackbutt
• Tallowwood
• Stringybark
• Karri
• Sydney Bluegum
• Jarrah
• Ironbark
• Tasmanian Oak
• Victorian Ash
• Grey Box
• Oak

Functioning

• TX drive — Optimum torque transmission, a tight and snug fit, and fast centering.
• Raised countersunk head — Milling pockets and small diameter give a discreet, subtle appearance and allow the head to sink cleanly and easily.
• Asymmetrical thread — Reduced drive-in torque, high overtorque, and easy screw-in.
• Optimised drilling tip — Quick, easy, and safe positioning and installation with reduced timber splitting — ideal for deck construction.
• 304 & 316 stainless steel — High corrosion and weather resistance, increased fracture torque, suitable for outdoor use and close-to-water applications.

For best results, we recommend pre-drilling and pre-countersinking holes.

Tip

Protection: Harsh chemical cleaners for timber may damage the screw surface. Please wash any residue off immediately for longer enjoyment.

Recommendation: Our black coated HS decking screws are best used for surfaces with low mechanical stress. In decking areas with heavy foot traffic, we recommend the screws with our silver stainless finish.

Perfect for hardwood to softwood under-constructions.

Advantages

• Offers a high degree of weather resistance.
• The self-drilling tip makes installation quick and easy.
• Small head diameter and underhead pockets ensure the head can sink cleanly and easily.
• Timber is protected from tearing or splitting by the drill tip.
• Available in 304 and 316 stainless steel.
• Also available in a 304 vintage finish and 316 black finish.

Applications

• Terrace decking on timber substructures
• Cladding

Building Materials

• Accoya
• Merbau
• Spotted Gum
• Blackbutt
• Tallowwood
• Stringybark
• Karri
• Sydney Bluegum
• Jarrah
• Ironbark
• Tasmanian Oak
• Victorian Ash
• Grey Box
• Oak

Functioning

• TX drive — Optimum torque transmission, a tight and snug fit, and fast centering.
• Raised countersunk head — Milling pockets and small diameter give a discreet, subtle appearance and allow the head to sink cleanly and easily.
• Asymmetrical thread — Reduced drive-in torque, high overtorque, and easy screw-in.
• Optimised drilling tip — Quick, easy, and safe positioning and installation with reduced timber splitting — ideal for deck construction.
• 304 & 316 stainless steel — High corrosion and weather resistance, increased fracture torque, suitable for outdoor use and close-to-water applications.

For best results, we recommend pre-drilling and pre-countersinking holes.

Tip

Protection: Harsh chemical cleaners for timber may damage the screw surface. Please wash any residue off immediately for longer enjoyment.

Recommendation: Our black coated HS decking screws are best used for surfaces with low mechanical stress. In decking areas with heavy foot traffic, we recommend the screws with our silver stainless finish.

Unique and stylish finish for your decking and cladding with steel substructures.

Advantages

• 316 stainless steel with additional zinc-coated steel tip offers a high degree of weather resistance
• The self-drilling tip makes installation quick and easy
• Small head diameter ensures the head can sink in cleanly and easily
• Timber is protected from tearing or splitting by the drill tip
• Smooth head for a perfect barefoot-proof finish

Functioning

• SIT® drive (TX compatible) — Optimum torque transmission, a tight and snug fit, and fast centering.
• High-efficiency thread — Anti-friction coating reduces drive-in torque.
• Aggressive drilling tip with wings — Cuts a clearance hole for decks with a steel under-construction. Quick, easy and safe work without pre-drilling for steel thickness 1.25–3.0 mm.
• 316 stainless steel with zinc-coated tip — High corrosion and weather resistance, increased fracture torque, suitable for outdoor use and close-to-water applications.

Instructions for Use

• Drive in the fastener at high to maximum speed using a cordless or electric drill.
• As soon as you hit the metal substructure, reduce speed and increase the pressure slightly.
• Do not overdrive — stop as soon as the screw head is level with the surface.
• Only use a drill driver (cordless or corded). Do not use an impact driver.

Applications

• Decking and cladding to steel substructures

Building Materials

• Merbau
• Spotted Gum
• Blackbutt
• Tallowwood
• Stringybark
• Karri
• Sydney Bluegum
• Jarrah
• Ironbark
• Tasmanian Oak
• Victorian Ash
• Grey Box
• Oak

Unique and stylish finish for your fencing, screening and cladding with steel substructures.

Advantages

• Carbon steel screw with Delta®-Seal coating for better corrosion protection
• Suitable for fencing
• Not suitable for use around pools, close to the waterline, or in aggressive environments or areas with extreme UV exposure (for those applications, consider our stainless 316/bimetal screws)
• The self-drilling tip makes installation quick and easy
• Small head diameter ensures the head can sink in cleanly and easily
• Timber is protected from tearing or splitting by the drill tip
• Smooth head for a perfect finish — no need to sand timber after installation
• Available in silver, brown and black finishes

Functioning

• SIT® drive (TX compatible) — Optimum torque transmission, a tight and snug fit, and fast centering.
• High-efficiency thread — Anti-friction coating reduces drive-in torque.
• Aggressive drilling tip with wings — Cuts a clearance hole for timber and through the steel frame. Quick, easy and safe work without pre-drilling for steel thickness 1.25–3.0 mm.
• Delta®-Seal coating — High corrosion and weather resistance, increased fracture torque, and suitable for outdoor use where stainless steel is not required.

Not suitable for use around pools, close to the waterline, or in aggressive environments or areas with extreme UV exposure. For those applications, consider our stainless 316/bimetal screws.

Instructions for Use

• Drive in the fastener at high to maximum speed using a cordless or electric drill.
• As soon as you hit the metal substructure, reduce speed and increase the pressure slightly.
• Do not overdrive — stop as soon as the screw head is level with the surface.
• Only use a drill driver (cordless or corded). Do not use an impact driver.

Applications

• Fencing

Building Materials

• Merbau
• Spotted Gum
• Blackbutt
• Tallowwood
• Stringybark
• Karri
• Sydney Bluegum
• Jarrah
• Ironbark
• Tasmanian Oak
• Victorian Ash
• Grey Box
• Oak

Tip

Protection: Harsh chemical cleaners for timber may damage the screw surface. Please wash any residue off immediately for longer enjoyment.

Note: Delta®-Seal coating is not suitable for areas subject to sea water, salt-chlorinated pools, harsh or aggressive environments (including cleaners), or extreme UV exposure. For these applications, please see our 316 stainless steel alternative.

Unique and stylish finish for your fencing, screening and cladding with steel substructures.

Advantages

• Carbon steel screw with Delta®-Seal coating for better corrosion protection
• Suitable for fencing
• Not suitable for use around pools, close to the waterline, or in aggressive environments or areas with extreme UV exposure (for those applications, consider our stainless 316/bimetal screws)
• The self-drilling tip makes installation quick and easy
• Small head diameter ensures the head can sink in cleanly and easily
• Timber is protected from tearing or splitting by the drill tip
• Smooth head for a perfect finish — no need to sand timber after installation
• Available in silver, brown and black finishes

Functioning

• SIT® drive (TX compatible) — Optimum torque transmission, a tight and snug fit, and fast centering.
• High-efficiency thread — Anti-friction coating reduces drive-in torque.
• Aggressive drilling tip with wings — Cuts a clearance hole for timber and through the steel frame. Quick, easy and safe work without pre-drilling for steel thickness 1.25–3.0 mm.
• Delta®-Seal coating — High corrosion and weather resistance, increased fracture torque, and suitable for outdoor use where stainless steel is not required.

Not suitable for use around pools, close to the waterline, or in aggressive environments or areas with extreme UV exposure. For those applications, consider our stainless 316/bimetal screws.

Instructions for Use

• Drive in the fastener at high to maximum speed using a cordless or electric drill.
• As soon as you hit the metal substructure, reduce speed and increase the pressure slightly.
• Do not overdrive — stop as soon as the screw head is level with the surface.
• Only use a drill driver (cordless or corded). Do not use an impact driver.

Applications

• Fencing

Building Materials

• Merbau
• Spotted Gum
• Blackbutt
• Tallowwood
• Stringybark
• Karri
• Sydney Bluegum
• Jarrah
• Ironbark
• Tasmanian Oak
• Victorian Ash
• Grey Box
• Oak

Tip

Protection: Harsh chemical cleaners for timber may damage the screw surface. Please wash any residue off immediately for longer enjoyment.

Note: Delta®-Seal coating is not suitable for areas subject to sea water, salt-chlorinated pools, harsh or aggressive environments (including cleaners), or extreme UV exposure. For these applications, please see our 316 stainless steel alternative.

Unique and stylish finish for your fencing, screening and cladding with steel substructures.

Advantages

• Carbon steel screw with Delta®-Seal coating for better corrosion protection
• Suitable for fencing
• Not suitable for use around pools, close to the waterline, or in aggressive environments or areas with extreme UV exposure (for those applications, consider our stainless 316/bimetal screws)
• The self-drilling tip makes installation quick and easy
• Small head diameter ensures the head can sink in cleanly and easily
• Timber is protected from tearing or splitting by the drill tip
• Smooth head for a perfect finish — no need to sand timber after installation
• Available in silver, brown and black finishes

Functioning

• SIT® drive (TX compatible) — Optimum torque transmission, a tight and snug fit, and fast centering.
• High-efficiency thread — Anti-friction coating reduces drive-in torque.
• Aggressive drilling tip with wings — Cuts a clearance hole for timber and through the steel frame. Quick, easy and safe work without pre-drilling for steel thickness 1.25–3.0 mm.
• Delta®-Seal coating — High corrosion and weather resistance, increased fracture torque, and suitable for outdoor use where stainless steel is not required.

Not suitable for use around pools, close to the waterline, or in aggressive environments or areas with extreme UV exposure. For those applications, consider our stainless 316/bimetal screws.

Instructions for Use

• Drive in the fastener at high to maximum speed using a cordless or electric drill.
• As soon as you hit the metal substructure, reduce speed and increase the pressure slightly.
• Do not overdrive — stop as soon as the screw head is level with the surface.
• Only use a drill driver (cordless or corded). Do not use an impact driver.

Applications

• Fencing

Building Materials

• Merbau
• Spotted Gum
• Blackbutt
• Tallowwood
• Stringybark
• Karri
• Sydney Bluegum
• Jarrah
• Ironbark
• Tasmanian Oak
• Victorian Ash
• Grey Box
• Oak

Tip

Protection: Harsh chemical cleaners for timber may damage the screw surface. Please wash any residue off immediately for longer enjoyment.

Note: Delta®-Seal coating is not suitable for areas subject to sea water, salt-chlorinated pools, harsh or aggressive environments (including cleaners), or extreme UV exposure. For these applications, please see our 316 stainless steel alternative.

Unique and stylish finish for your fencing, screening and cladding with steel substructures.

Advantages

• Carbon steel screw with Delta®-Seal coating for better corrosion protection
• Suitable for fencing
• Not suitable for use around pools, close to the waterline, or in aggressive environments or areas with extreme UV exposure (for those applications, consider our stainless 316/bimetal screws)
• The self-drilling tip makes installation quick and easy
• Small head diameter ensures the head can sink in cleanly and easily
• Timber is protected from tearing or splitting by the drill tip
• Smooth head for a perfect finish — no need to sand timber after installation
• Available in silver, brown and black finishes

Functioning

• SIT® drive (TX compatible) — Optimum torque transmission, a tight and snug fit, and fast centering.
• High-efficiency thread — Anti-friction coating reduces drive-in torque.
• Aggressive drilling tip with wings — Cuts a clearance hole for timber and through the steel frame. Quick, easy and safe work without pre-drilling for steel thickness 1.25–3.0 mm.
• Delta®-Seal coating — High corrosion and weather resistance, increased fracture torque, and suitable for outdoor use where stainless steel is not required.

Not suitable for use around pools, close to the waterline, or in aggressive environments or areas with extreme UV exposure. For those applications, consider our stainless 316/bimetal screws.

Instructions for Use

• Drive in the fastener at high to maximum speed using a cordless or electric drill.
• As soon as you hit the metal substructure, reduce speed and increase the pressure slightly.
• Do not overdrive — stop as soon as the screw head is level with the surface.
• Only use a drill driver (cordless or corded). Do not use an impact driver.

Applications

• Fencing

Building Materials

• Merbau
• Spotted Gum
• Blackbutt
• Tallowwood
• Stringybark
• Karri
• Sydney Bluegum
• Jarrah
• Ironbark
• Tasmanian Oak
• Victorian Ash
• Grey Box
• Oak

Tip

Protection: Harsh chemical cleaners for timber may damage the screw surface. Please wash any residue off immediately for longer enjoyment.

Note: Delta®-Seal coating is not suitable for areas subject to sea water, salt-chlorinated pools, harsh or aggressive environments (including cleaners), or extreme UV exposure. For these applications, please see our 316 stainless steel alternative.

The Angle Bracket 280mm is a robust structural support component designed specifically for securing gate frames, posts, and automation equipment, ensuring stable and reliable operation in both residential and commercial installations.

Key Features

• Application suitability – Ideal for swing and sliding gates, gate automation motors, and support posts in new builds or retrofits.
• Design – 280mm right-angle profile provides strong, rigid support while maintaining a compact footprint for tight installation spaces.
• Material quality – Manufactured from high-grade steel for consistent strength and performance under load.
• Durability – Corrosion-resistant finish helps withstand outdoor exposure, weather changes, and daily mechanical stress.
• Installation – Pre-drilled holes (where applicable) and standard fixing points allow quick, accurate mounting with common hardware.
• Maintenance – Low-maintenance construction; periodic visual checks and tightening of fixings are typically all that’s required.
• Versatility – Suitable for metal or timber gate systems, fence structures, and general structural bracing applications.

[additional]

Aqualis Bamboo Cleaner 10L is a specialised cleaning solution formulated specifically for bamboo surfaces in both residential and commercial environments. Designed to gently but effectively remove everyday dirt, grime, and scuff marks, it helps preserve the natural beauty and longevity of bamboo flooring and fittings without causing damage or dulling the finish.

Key Features

• Application suitability – Ideal for sealed bamboo floors and bamboo surfaces in homes, offices, retail spaces, and other high-traffic commercial areas.
• Cleaning performance – Lifts dirt, spills, and marks efficiently while maintaining the integrity of the bamboo surface.
• Finish and appearance – Helps retain the natural colour and sheen of bamboo, leaving a clean, streak-free finish.
• Safety – Formulated for regular use on bamboo without harsh abrasives, helping to minimise the risk of surface damage.
• Maintenance – Supports ongoing care by helping to prevent build-up that can lead to premature wear and discolouration.
• Ease of use – Simple to apply with standard mops or cleaning equipment, making routine cleaning fast and convenient.
• Environmental benefits – Designed with bamboo’s sustainable nature in mind, supporting eco-conscious cleaning practices.

[additional]

Aqualis Bamboo Cleaner 4L is a specialised cleaning solution formulated specifically for bamboo surfaces in both residential and commercial environments. Designed to gently but effectively remove everyday dirt, grime, and scuff marks, it helps preserve the natural beauty and longevity of bamboo flooring and fittings without causing damage or dulling the finish.

Key Features

• Application suitability – Ideal for sealed bamboo floors and bamboo surfaces in homes, offices, retail spaces, and other high-traffic commercial areas.
• Cleaning performance – Lifts dirt, spills, and marks efficiently while maintaining the integrity of the bamboo surface.
• Finish and appearance – Helps retain the natural colour and sheen of bamboo, leaving a clean, streak-free finish.
• Safety – Formulated for regular use on bamboo without harsh abrasives, helping to minimise the risk of surface damage.
• Maintenance – Supports ongoing care by helping to prevent build-up that can lead to premature wear and discolouration.
• Ease of use – Simple to apply with standard mops or cleaning equipment, making routine cleaning fast and convenient.
• Environmental benefits – Designed with bamboo’s sustainable nature in mind, supporting eco-conscious cleaning practices.

[additional]

Technical Details

Designed to drive a wide range of star pickets and post sizes and in to the ground. Powererd by powerful 37.7 cc 4-stroke engine

• Fuel tank capacity - 0.9 litre
• max power & speed - 1KW / 6500rpm
• Max torque - 1.65N.m 5500rpm
• Fuel consumption - <0.5L/h
• Impact frequency - 1500-2000BPM
• Impact energy - 20-45J
• Pull start
• Piling socket adaptors - 20-80mm

Concrete Grey Blocks are manufactured utilising recycled fly ash to provide a lightweight, high strength product. Concrete Grey Blocks are commonly used for construction on houses, schools, and various commercial projects.

[additional]

The new Astor DT-10 is an affordable Digital Theodolite which is ideal for building set out and general construction tasks.

This listing is Astor DT-10 Digital Theodolite-1 Year Warranty Incl. Plumb Bob, Rain Coat, Case.

Key Features

• Astor DT-10 Digital Theodolite-1 Year Warranty Incl. Plumb Bob, Rain Coat, Case

What's Included

• Instructions and carry case

In this system, the rope grab is constructed of high strength steel and works on 12mm diameter kernmantle rope anchorage line, incorporated permanently on the anchorage line, and comes with an energy absorbing element.

It is not detachable from the rope, so the worker does not lose the device when the equipment is not in use. This system is an ideal fall restraint device for use while working on platforms and roofs. The anchorage line has one side loop for connector and the other side a stop knot.

Key Features

• Use in fall restraint applications, particularly while working on platforms and rooftops
• 12mm diameter polyester kernmantle rope
• Available in 5m, 15m, 20m and 25m
• Aluminium alloy rope grab: 15kN minimum breaking strength
• Steel quarter-turn locking karabiner with safety pin: 17mm gate opening, 23kN minimum breaking strength
• Steel triple-action locking karabiner with safety pin: 21.5mm gate opening, 40kN minimum breaking strength
• Conforms to AS 1891.5 and EN 353-2:2002

Every sling is proof tested, individually serial numbered, tagged and comes with a test certificate. Fabricated using 100% high tenacity polyester yarn and wound in a continuous hank to form an endless sling. Durable and specially woven, 100% polyester non-load bearing tubular sleeve to give maximum wear protection to the yarn hank. Conforms to Australian Standard AS 4497.1. Black color available upon request.

Every sling is proof tested, individually serial numbered, tagged and comes with a test certificate. Fabricated using 100% high tenacity polyester yarn and wound in a continuous hank to form an endless sling. Durable and specially woven, 100% polyester non-load bearing tubular sleeve to give maximum wear protection to the yarn hank. Conforms to Australian Standard AS 4497.1. Black color available upon request.

Every sling is proof tested, individually serial numbered, tagged and comes with a test certificate. Fabricated using 100% high tenacity polyester yarn and wound in a continuous hank to form an endless sling. Durable and specially woven, 100% polyester non-load bearing tubular sleeve to give maximum wear protection to the yarn hank. Conforms to Australian Standard AS 4497.1. Black color available upon request.

Every sling is proof tested, individually serial numbered, tagged and comes with a test certificate. Fabricated using 100% high tenacity polyester yarn and wound in a continuous hank to form an endless sling. Durable and specially woven, 100% polyester non-load bearing tubular sleeve to give maximum wear protection to the yarn hank. Conforms to Australian Standard AS 4497.1. Black color available upon request.

Every sling is proof tested, individually serial numbered, tagged and comes with a test certificate. Fabricated using 100% high tenacity polyester yarn and wound in a continuous hank to form an endless sling. Durable and specially woven, 100% polyester non-load bearing tubular sleeve to give maximum wear protection to the yarn hank. Conforms to Australian Standard AS 4497.1. Black color available upon request.

Every sling is proof tested, individually serial numbered, tagged and comes with a test certificate. Fabricated using 100% high tenacity polyester yarn and wound in a continuous hank to form an endless sling. Durable and specially woven, 100% polyester non-load bearing tubular sleeve to give maximum wear protection to the yarn hank. Conforms to Australian Standard AS 4497.1. Black color available upon request.

Every sling is proof tested, individually serial numbered, tagged and comes with a test certificate. Fabricated using 100% high tenacity polyester yarn and wound in a continuous hank to form an endless sling. Durable and specially woven, 100% polyester non-load bearing tubular sleeve to give maximum wear protection to the yarn hank. Conforms to Australian Standard AS 4497.1. Black color available upon request.

Every sling is proof tested, individually serial numbered, tagged and comes with a test certificate. Fabricated using 100% high tenacity polyester yarn and wound in a continuous hank to form an endless sling. Durable and specially woven, 100% polyester non-load bearing tubular sleeve to give maximum wear protection to the yarn hank. Conforms to Australian Standard AS 4497.1. Black color available upon request.

Every sling is proof tested, individually serial numbered, tagged and comes with a test certificate. Fabricated using 100% high tenacity polyester yarn and wound in a continuous hank to form an endless sling. Durable and specially woven, 100% polyester non-load bearing tubular sleeve to give maximum wear protection to the yarn hank. Conforms to Australian Standard AS 4497.1. Black color available upon request.

Every sling is proof tested, individually serial numbered, tagged and comes with a test certificate. Fabricated using 100% high tenacity polyester yarn and wound in a continuous hank to form an endless sling. Durable and specially woven, 100% polyester non-load bearing tubular sleeve to give maximum wear protection to the yarn hank. Conforms to Australian Standard AS 4497.1. Black color available upon request.

Every sling is proof tested, individually serial numbered, tagged and comes with a test certificate. Fabricated using 100% high tenacity polyester yarn and wound in a continuous hank to form an endless sling. Durable and specially woven, 100% polyester non-load bearing tubular sleeve to give maximum wear protection to the yarn hank. Conforms to Australian Standard AS 4497.1. Black color available upon request.

20mm polyester personal anchor sling is designed to form a temporary anchor point.

It's easy and quick to install for working at height or for rescue use.

The polyester webbing conforms to AS/NZS 5532 standards.

Rated at 15kN the sling works with compatible karabiners to form an extremely secure yet quick to deploy personal anchor system.

Flat webbing slings are manufactured according to Australian Standard AS1353.1. Fabricated using 100% high tenacity polyester yarn. Durable and specially woven, 100% polyester with standard folded eyes that incorporates eye wear padding to provide maximum protection around the eyes. Each sling is proof tested, individually serial numbered, tagged and complete with test certificates.

Flat webbing slings are manufactured according to Australian Standard AS1353.1. Fabricated using 100% high tenacity polyester yarn. Durable and specially woven, 100% polyester with standard folded eyes that incorporates eye wear padding to provide maximum protection around the eyes. Each sling is proof tested, individually serial numbered, tagged and complete with test certificates.

Flat webbing slings are manufactured according to Australian Standard AS1353.1. Fabricated using 100% high tenacity polyester yarn. Durable and specially woven, 100% polyester with standard folded eyes that incorporates eye wear padding to provide maximum protection around the eyes. Each sling is proof tested, individually serial numbered, tagged and complete with test certificates.